die box will einfach nicht vollständig hochfahren (nokia mit 2 flashchips)
hier das bootlog:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-73.65.27.07.00.00-b3
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 203620
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 635882 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 635818 Bytes = 620 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Apr 13 14:33:10 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30812k available (1120k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:17:b1:dd
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 9, console /dev/console: '/etc/init.d/rcS') multi-ca
Using /lib/modules/2.4.20-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.o
SIOCADDRT: Invalid argument
ifup: Ignoring unknown interface net
ifup: i2c-core.o: driver FOR_PROBE_ONLY registered.
Ignoring unknown interface loopbacki2c-core.o: driver unregistered: FOR_PROBE_ON
LY
i2c-core.o: driver FOR_PROBE_ONLY registered.
.: Can't open /proc/bus/dbox.sh
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
/dev/dbox/rc0: No such file or directory
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
[AVS] i2c error -121
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [](pos. 1).
saa7126_readbuf: i2c read error (ret == -121)
saa7126_readbuf: i2c read error (ret == -121)
Using /lib/modules/2.4.20-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
[AVS] i2c error -121
Oops: kernel access of bad area, sig: 11
NIP: C00B7AD8 XER: 00000000 LR: C38D7E6C SP: C1CDFE00 REGS: c1cdfd50 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0066705C, DSISR: 000003C3
TASK = c1cde000[172] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38D7E6C C1CDFE00 C1CDE000 00667030 C1CDFE38 00000003 C38D8A80 00000000
GPR08: C0137F30 C38E0000 00000000 C00B7AC8 84004022 10063BE4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01CDFF40 C1CDFEA8 10075284
GPR24: C1AB8000 C01F6C20 C0130000 C0136470 C38D8A88 C0154808 C38E0000 C38E0000
Call backtrace:
00000000 C38D7E6C C38D7F34 C38D7320 C38D80CC C0010188 C00025DC
10016DBC 10017F50 10003E38 10003A44 0FEFACB0 00000000
Segmentation fault
Using /lib/modules/2.4.20-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.20-dbox2/misc/dvbdev.o
Using /lib/modules/2.4.20-dbox2/misc/avia.o
AVIA: $Id: avia_core.c,v 1.35.2.1 2003/02/18 14:53:34 alexw Exp $
Oops: kernel access of bad area, sig: 11
NIP: C00B7AD8 XER: 20000000 LR: C38D7580 SP: C1CDFDF0 REGS: c1cdfd40 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0066705C, DSISR: 000003C3
TASK = c1cde000[204] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: C38D7580 C1CDFDF0 C1CDE000 00667030 C1CDFE28 00000002 C38E072C C01F6000
GPR08: 000000F0 C1F2BDDC C38E0000 C00B7AC8 82004024 10063BE4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01CDFF40 C1CDFEA8 10075E20
GPR24: C1AA4000 C01F6CA0 C38E0000 C38E0000 00000000 00000001 C38E0D70 C38E0000
Call backtrace:
C00269E4 C38D7580 C38DF5D0 C38E015C C0010188 C00025DC 10016DBC
10017F50 10003E38 10003A44 0FEFACB0 00000000
Segmentation fault
Using /lib/modules/2.4.20-dbox2/misc/cam.o
der moment ist gekommen...
Oops: kernel access of bad area, sig: 11
NIP: C00B7AD8 XER: 00000000 LR: C38D7580 SP: C1CDFDD0 REGS: c1cdfd20 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0066705C, DSISR: 000003C3
TASK = c1cde000[205] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: C38D7580 C1CDFDD0 C1CDE000 00667030 C1CDFE08 00000002 FF000000 C013E7E3
GPR08: 00000000 C1F2BDDC FF002830 C00B7AC8 0000000D 10063BE4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01CDFF40 C1CDFEA8 10072810
GPR24: C1A68000 C01F6DC0 C0130000 C3923000 C0140000 00068D58 FFFFFFFF C38E0000
Call backtrace:
01CDFF40 C38D7580 C38FE4DC C38FE878 C38FEBA0 C38FF184 C0010188
C00025DC 10016DBC 10017F50 10003E38 10003A44 0FEFACB0 00000000
Segmentation fault
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.23.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.17 2002/09/15 18:06:26 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1.2.3 2003/05/03 13:21:51 alexw Exp $
[AVS] i2c error -121
avia_gt_dmx: Successfully loaded ucode VB1.7
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.4.3 2003/04/10 14:54:22 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/dvb.o
dvb.c: init_dvb
Init
Board unbekannt
Starting pid 231, console /dev/console: '/etc/init.d/halt'
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
CXA2092 found
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1.2.1 2003/02/18 14:32:46 alexw Exp
$
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17.4.1 2003/02/18 14:32:46 alexw Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.4.5 2003/03/05 09:00:31 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12.4.1 2003/02/18 14:32:46 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
[AVS] i2c error -121
Unmounting 'ramfs' on '/tmp'
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
[AVS] i2c error -121
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
[AVS] i2c error -121
The system is halted. Press Reset or turn off power
[AVS] i2c error -121
System halted.
Oops: kernel access of bad area, sig: 11
NIP: C00B7AD8 XER: 00000000 LR: C38D6C14 SP: C1FF5D80 REGS: c1ff5cd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 0066705C, DSISR: 000003C3
TASK = c1ff4000[1] 'init' Last syscall: 88
last math 00000000 last altivec 00000000
GPR00: C38D6C14 C1FF5D80 C1FF4000 00667030 C1FF5DB8 00000002 FF000000 C013E7E3
GPR08: 00000000 C38E0000 FF002830 C00B7AC8 0000000D 10063BE4 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01FF5F10 00000000 C0002814
GPR24: C0002580 1005BC44 100039C4 30022F18 00000001 0000000A 10062B98 00667030
Call backtrace:
00001032 C38D6C14 C38D807C C38D80AC C0007FB8 C00191E4 C00025DC
00000000 10013F00 7FFFFD30 00008000 10013B4C 10013C34 100147C4
10003E38 10003A44 0FEFACB0 00000000
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..