Bekomme folgendes Fenster:
***Adapter Desc: Xircom Ethernet 10/100 + Modem 56 PC Card
***MAC address: 00:80:C7:E9:9C:9A Local IP: 192.168.100.240 (via Packet-Driver #4)
***BootP server started... Port 67
***TFTP server started... Port 69
RARP> Answer sent to 00:50:9C:1E:C4:28 with DBox-IP: 192.168.100.220
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-be.ef.1c.07.00.00-cc
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0048
will verify ELF image, start= 0x800000, size= 1267512
verify sig: 0
Branching to 0x409b8
wo ist mein Problem??
Image Auslesen mit DBOX2.rar
-
- Interessierter
- Beiträge: 39
- Registriert: Montag 17. Februar 2003, 00:41
-
- Interessierter
- Beiträge: 39
- Registriert: Montag 17. Februar 2003, 00:41
Also hab das mit dem Reset und der Pfeil nach oben Taste so ca. ne 1/2 Std. probiert und habe es dann 2x geschaft soweit zu kommen.
Denke irgendwie mag die Netzwerkverbindung nicht so richtig???
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-be.ef.1c.07.00.00-cc
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.100.220, My IP 192.168.100.240
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-4f-3f
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.100.220; our IP address is 192.168.100.240
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: ###T ########T #### # # ### T#### ####T
Dann bricht er ab und beginnt neu mit
BOOTP broadcast 2
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: ###########T ####T # #T ### #### T#### ####T
Dann bricht er wieder ab und beginnt wieder mit
BOOTP broadcast 3
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: ######T ##########T ####T # #T ### #### T#### ####T ####
und das macht er bis er ...... habe bei BOOTP broadcast 33
mal das ganze unterbrochen und nochmal probiert wieder das selbe??
Weis hier wer Rat??

Denke irgendwie mag die Netzwerkverbindung nicht so richtig???
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-be.ef.1c.07.00.00-cc
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.100.220, My IP 192.168.100.240
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1f-4f-3f
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x84A7E (0x1E00 bytes)
FB logo at: 0x868A6 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.100.220; our IP address is 192.168.100.240
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: ###T ########T #### # # ### T#### ####T
Dann bricht er ab und beginnt neu mit
BOOTP broadcast 2
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: ###########T ####T # #T ### #### T#### ####T
Dann bricht er wieder ab und beginnt wieder mit
BOOTP broadcast 3
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: ######T ##########T ####T # #T ### #### T#### ####T ####
und das macht er bis er ...... habe bei BOOTP broadcast 33
mal das ganze unterbrochen und nochmal probiert wieder das selbe??
Weis hier wer Rat??
-
- Interessierter
- Beiträge: 36
- Registriert: Dienstag 11. Februar 2003, 18:35
-
- Interessierter
- Beiträge: 39
- Registriert: Montag 17. Februar 2003, 00:41
Hallo dr.Sung,
habe schon zwei verschieden cross Kabel probbiert, habe keinen Switch, Hub sondern direkt Lapt. an D-box mit Cross-Kabel.
Meine Karte steht auf 10MB halfduplex.
Habe das aber auch schon mit autodedect probiert hier auch das selbe.
Habe leider keinen anderen PC zum testen. Was kann ich noch probieren?
Gruß G
habe schon zwei verschieden cross Kabel probbiert, habe keinen Switch, Hub sondern direkt Lapt. an D-box mit Cross-Kabel.
Meine Karte steht auf 10MB halfduplex.
Habe das aber auch schon mit autodedect probiert hier auch das selbe.
Habe leider keinen anderen PC zum testen. Was kann ich noch probieren?
Gruß G
-
- Interessierter
- Beiträge: 39
- Registriert: Montag 17. Februar 2003, 00:41
-
- Tuxboxer
- Beiträge: 5873
- Registriert: Samstag 23. Februar 2002, 22:46