mir gelingt es seit einigen Tagen wieder ein komplettes cdk zu erstellen und habe dabei keinerlei Fehlermeldungen bekommen. Leider bekomme ich auch seither jedesmal die folgende Fehlermeldung (Segmentation fault) im Bootmanager und die Box zeigt keinerlei Anzeige im Display:
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.19 2002/05/09 19:54:19 obi Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.10 2002/04/25 22:10:38 Jolt Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.86 2002/05/09 07:29:21 waldi Exp $
ENX-INITed -> 0
there MIGHT be no TS
avia_gt_gv: $Id: avia_gt_gv.c,v 1.18 2002/05/30 00:39:03 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.12 2002/05/08 12:56:41 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.18 2002/05/01 21:51:35 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.22 2002/05/29 14:21:05 derget Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.16 2002/05/20 21:09:11 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
i2c-core.o: driver VES1993 DVB DECODER registered.
i2c-core.o: client [VES1993] registered to adapter [](pos. 4).
i2c-core.o: driver sp5659/tsa5059 tuner driver registered.
i2c-core.o: client [DBox2 Tuner Driver] registered to adapter [](pos. 5).
VES1993: sp5659 tuner found
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.31 2002/05/30 00:39:03 obi Exp $
avia_gt_gv: set_input_mode (mode=3)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=3)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=3)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_oss: $Id: avia_gt_oss.c,v 1.6 2002/05/06 02:18:18 obi Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.88 2002/05/07 16:59:19 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.10 2002/05/06 02:18:18 obi Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
Please press Enter to activate this console. Segmentation fault
Hat jemand eine Idee, was falsch läuft und kann mir erläutern wie das Problem zu beseitigen ist ?
Gruß
Dagobert1
