Nokia 2xI, Avia 600 ohne Bild und Ton

[HiSpeed]

Hallo zusammen,

Ich habe eine Nokia DBOX2 SAT mit 2xIntel und Avia 600, die zeigt weder Bild noch Ton. Mit dem aktuellen AlexW-Image (Basisimage Version 1.5 und Cramfs vom 19.05.2002) sowie einer per FTP eingespielten Services.xml und den original UCODE-Dateien findet sie keinen Sender. Beim Umschalten kommt immer "Kanal zur Zeit nicht verfügbar". Auch ein Sendersuchlauf findet nichts. Das "Neutrino" - Logo über SCART ist perfekt zu sehen. Auch wird der Bootvorgang ordnungsgemäss abgeschlossen, so dass der volle Funktionsumfang von Neutrino zur Verfügung steht (nur leider ohne Kanäle und Ton). Ich habe dann mal zum ausprobieren auf BN 1.6 zurückgeflasht, aber auch das blieb erfolglos (Fehlercode UD4). Folgendes Bootprotokoll erhalte ich mit AlexW vom 19.05.2002 (Vielleicht findet jemand ja das Problem ?!?)

BOOTP broadcast 3
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-58.f3.80.07.00.00-f9
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/nokia-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0196

will verify ELF image, start= 0x800000, size= 202876
verify sig: 262
Branching to 0x40000


ppcboot 0.6.4 (Mar 2 2002 - 20:44:32)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-43-be-4b
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x8F049 (0x1E00 bytes)
FB logo at: 0x90E71 (0x31C1 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
Kernel image at: 0x10020034 (0x8EFED bytes)
## Booting Linux kernel at 10020034 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 585645 Bytes = 571 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19-pre8-dbox2 (von alexW) (gcc version 3.0.4) #16 Son Mai 19 1
9:32:22 UTC 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: ro root=1f03 console=ttyS0
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 67 busfreq = 67
WARNING: NEW intfreq = 67000000 busfreq = 67000000
Decrementer Frequency = 251250000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30920k available (1032k kernel code, 352k data, 64k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12 (20020219) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:43:be:4b
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs (kernel, logos)"
0x000c0000-0x00160000 : "var (jffs2)"
0x00160000-0x00760000 : "root (cramfs)"
0x00760000-0x00800000 : "flfs (ppcboot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k init
init started: BusyBox v0.61.pre (2002.04.02-22:55+0000) multi-ca[i2c-8xx]: mpc
8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
write 1 event's ...
write 1 event's ...
avia_gt_core: $Id: avia_gt_core.c,v 1.19 2002/05/09 19:54:19 obi Exp $
avia_gt_core: autodetecting chip type... AViA GTX found
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.13 2002/05/09 22:25:23 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.86 2002/05/09 07:29:21 waldi Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_gv: $Id: avia_gt_gv.c,v 1.17 2002/05/09 22:23:30 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.12 2002/05/08 12:56:41 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.18 2002/05/01 21:51:35 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.18 2002/05/07 16:59:19 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.15 2002/05/13 22:38:36 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Init VES1893
i2c-core.o: driver VES1893 DVB demodulator registered.
i2c-core.o: client [VES1893] registered to adapter [](pos. 4).
avia_gt_core: masking unhandled irq reg 0 bit 6
VES1893: attaching VES1893 at 0x10 to adapter
avia_gt_napi: $Id: avia_gt_napi.c,v 1.88 2002/05/07 16:59:19 Jolt Exp $
avia_gt_napi: warning, misaligned queue 0 (is 32a00, size 10000), aligning...
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.10 2002/05/06 02:18:18 obi Exp $
avia_gt_vbi: got demux C-Cube - AViA eNX/GTX
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.30 2002/05/03 16:47:35 obi Exp $
avia_gt_gv: set_input_mode (mode=3)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=3)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=3)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 90x36
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
CXA2092 found
CXA2092 found
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
Network LCD-Driver $Id: lcdd.cpp,v 1.48 2002/05/15 23:32:12 McClean Exp $

[lcdd] load config
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.126 2002/05/15 10:00:55 dirch Exp $
caching 504 hours
events are old 60min after their end time
dmxdev: set buffer size 40000 -> 60000
$Id: zapit.cpp,v 1.171 2002/05/04 15:25:25 McClean Exp $

dmxdev: set buffer size 40000 -> 60000
[getservices.cpp] going to parse satellite Astra 19.2E
dmxdev: set buffer size 40000 -> 60000
[zapit] reading Bouquets ..........
[zapit] Found 11 bouquets.
[zapit] channels have been loaded succesfully
Controld $Id: controld.cpp,v 1.58 2002/05/08 16:21:43 McClean Exp $

[controld] Boxtype detected: (01, 1, 1, Nokia)
set event: 00000009
dmxdev: set buffer size 40000 -> 60000
[nhttpd] Neutrino HTTP-Server starting..
dmxdev: set buffer size 40000 -> 60000
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.275 2002/05/17 13:06:50 woglinde Exp
$

[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
fbcon_setup: No support for fontwidth 8
fbcon_setup: type 0 (aux 0, depth 8) not supported
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
dmxdev: set buffer size 40000 -> 60000
[neutrino] enable flash
[neutrino] Software update enabled
IP : 192.168.250.3
Netmask : 255.255.255.0
Broadcast: 192.168.250.255
Gateway :
[neutrino] menue setup
[CHTTPUpdater] HTTP-Basepath: http://dboxupdate.berlios.de/images/
[CHTTPUpdater] Image-Filename: cdk.cramfs
[CHTTPUpdater] Version-Filename: cdk.cramfs.version
[neutrino] control event register
[neutrino] sectionsd event register
dmxdev: set buffer size 40000 -> 60000
[neutrino] zapit event register
[neutrino] timerd event register
[CFrontend::getEvent] timeout
zap failed!
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000
dmxdev: set buffer size 40000 -> 60000

[sloop]

Fehlercode UD4 heist kein oder zu schwaches Antennsignal. Wenn es die BN-Soft nicht kann, kann auch Linux nichts empfangen.
Also Schüssel kontrolieren und alle kabel-verbindungen prüfen.

[LeoYear99]

Habe genau dasselbe Problem mit ner NokiaKabel Avia500 2xI.

Dachte, der Tuner sei kaputt...oder sonstiger Hardwaredefekt....
Liegt das nun am debuggen oder war das von Anfang an.
Bei mir ist blöd, daß ich die Box nicht vorher getestet habe...und das somit nicht weiß.

Am Antennensignal kann es nicht liegen....Ne andere NokiaKabel läuft ohne Probleme....