hda: lost interrupt Fehler
-
- Neugieriger
- Beiträge: 5
- Registriert: Dienstag 27. Mai 2008, 20:41
hda: lost interrupt Fehler
Hallo Jungs!
Ich bring mein ide- Interface einfach nicht zum laufen. Hierbei handelt es sich um ein Interface von dbox2.net für meine Nokia box mit 2xI, 32mb und mit neuestem Jtg- Image (2.2.7). Den Fehler hda: lost interrupt bekomme ich nicht weg. Die Platte und Kapazität wird allerdings erkannt, kann aber nicht Formatieren oder Patitionieren. Hab bereits das Flachbandkabel mit Stecker zwischen Interface und Modem, sowie das Flachbandkabel für die Platte getauscht, meine Festplatte am Rechner geprüft und zur Sicherheit ne neue Platte ausprobiert, alle Löstellen des Interface nachgelötet aber alles ohne Erfolg (der Reihe nach wie geschrieben abgearbeitet). Ach ja, die 3,5 Zoll Platte ist von WD mit 500GB und mit externem Netzteil.
Ja, jetzt bin ich ratlos! Habt ihr noch ne Idee, was ich noch probieren, bzw. prüfen könnte???
Gruß
P.S. Hier mein Bootlog
[i2c-8xx]: mpc 8xx i2c initance createdtel/Sharp Exten
[i2c-8xx]: adapter: 003
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $s
812k video memedt
Calibra
[sect
avia_g
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $edLASH: 8 hours Extended Texte (1268k kernel code, 3
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).ght=576)MTD partitions on "D-Box 2 flash memory":he has
/var/tuxbox/c
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
S
[neutrino] Software update e"che hash table e
/var/tuxbox/
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $Console on ttyS0] No special S
Mount cache hash tab
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $...ete Flash"8/03/21 19:17:15 seife Exp $hash table e
Select opti (o
avia_av: AVIA500 sptsfix is offshare/fonts/12.pcf.gz...OK (Fix
avia_av_core: Starting avia_av_wdt thread.gt_core: masking unhandled irq re
mice: PS
avia_gt_ucode: ucode section filters disabled..11 2007/08/07 0onfigured
avia_gt_core: masking unhandled irq reg 0 bit 6font cache...th0: CPM ENET Ve
Kernel command li
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...9)0
loop: loaded (max
/bin/neutrino: /lib/libpng12.so.0: no
dboxide: activat
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
CPU:
event: $Id: eventx 2 flash
/bin/
hda: 976773168 sectors (50
avia_gt_gv: set_input_size (width=720, height=576)o] frameBuffer Instance createdtel/Sharp Extended
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $t_mode (mode=2)se suspend
hda: lost interrupt]: adapter: 0768 byt_in
avia_gt_pcm_set_rate(44100)576)MT
hda: lost interrupt
avia_gt_capture: $Id: avia_gt_capture.c,vtware update e
lcd.o: init lcd driver moduleernel memory: 6
hda: lost int
lcd.o: found KS0713/SED153X lcd interface 1 (32-bit)_gt_core: $Id: avia_gt_core.
jtginfo $Id: jtginfo.c,v 2.0 2008/04/16 22:16:44 jtgriker Exp $t interrupt01:01:22 carjay Expering as event clientorm Multi-Pl
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
[c
[LCDFONT] FTC_Face_Requester (Fix1
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $re: masking unh
avia_gt_dmx: $Id: avia_gt
dboxide: $Id: main.c
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $rnel command line:
[controld] VIDEO_EVENT_SIZE_CHANGE
half-duplex mo
avia_gt_pcm_set_rate(44100)xide:
at
WATCHDOG reset enabled_gt_captur
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directoryt> debug:obi Exp $d failed: Invalid anux 2.4
BOOTP/TFTP bootstra
/var/tuxbox/config/mybouquets.xml: No such file or directoryxp $
/dev/ide/host0/b
a0
debug $/disc:
debug:
[eitThread] pid 117 start via broadcast Exp $pport
$Id: zapit.cpp,v 1.409 2008/03/21 19:17:15 seife Exp $PS/2ve write-c
debug: Given up BOOTP/TFTP boot_gt_vbi:
[frontend] uncommitted_switch_mode 0v 1.11 2003/10/26
hda: lost interru
avia_gt_core: masking unhandled irq reg 0 bit 7
devfs:
hda: lost in
Flash-FS bootstrap l
/tmp/currentservices.xml: No such file or directoryocols: ICda: lost interru
Found Flash-FS superbloc
[camd] ca system id: 1722 cache hash table of 512e
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $ 0 (off)ore.o:
Found file /root/platform/nokia-dbox2/ker
[controld] Boxtype detected: (1, N
[neutrino] frameBuffer Instance created
debug: HWrev X5 SWrev 0.8
812k video memotected 63 sec
avia_gt_gv: set_input_mode (mode=2)
0x
avi
WATCHDOG reset e
avia_gt_gv: set_input_size (width=720, height=576)Exp $
BOOTP/TFTP bootstrap loader (v0
###
[neutrino] Software update enabledded to 0x100000B: registering fron
[neutrino] enable flashDVB-C fron
[lcdd] time-skin not found -> using default.../TFTP boot_gt_vbi: $Id: avia_gt_vbi.c,v 1
boot
[lcdd] weekday-skin not found -> using default...der (v1.5)
IP Protocol
Image Na
[lcdd] date-skin not found -> using default...ache hash table of 512
Found
Image Type:
[lcdd] month-skin not found -> usi
PES, queue 0 normal.WP: 0x1)ntend] uncom
avia_gt_core: masking unhandled irq reg 1 bit 15_oss.c,v 1.26 2004/05/31 22:56:
................
[neutrino] initialized everything..........
m8xx_wdt: keep-alive t
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)rotected
[controld] format: 16:9 0x100000
[sectionsd] getUTC: read: Connection timed out(order: 2, 16384 bytes) HTTP_PORT: 9080B: reg
hda: lost interrupt0 (VES1820 based DV
[timeThread] - 27.05.2008 20:07:28, tim: Tue May 27 20:07:28 2008
Image Name: dbox
Mount cache hash table entries: 512
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
DVB
avia_gt_core: masking unhana
Data Size:
hda: lost interruptoxtype detect
hda: lost i
hda: lost interrupty UNIFIX3: UserDB(a
Adding Swap: 136544k swap-space (priority -1)r.
zone(1): 0 pages.or directoryors.
Linux
hda: lost interrupt
Kernel comm
XFS: bad magic number_options: 0x1DEO v1 =
XFS: SB validate failed0ectory
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a.15
Decrementer Frequency = 252000000/6008/
avia_gt_pcm_5 seife Exp
[contro
m8x
rgumentshfs: v
/dev/ide/host0/bus0/target0/lun0/disc:$Id: avia_gt_capth_mode 001:01:22 carj
setting 32-bit IO_support flag to 1nstaling u
write-caching = 0 (off) entries: 2048 (order: 2,
[LCDFONT] FTC_Face_Requester (Fix12/Regular)1:22 obi Exp $ing unhandled
Mount cache has
zapit shot down :)2 (o
D-Box 2 flash
CXA2092 found 2 x16 device
CXA2092 found-bit bankBoxt
Unmounting 'tmpfs' on '/tmp'table entries: 1024 (order:
umount: cannot umount /tmp: Device or resource busy11:00:19 camR=benutzer
Page-cache h
Intel/Sharp Ex
Unmounting 'jffs2' on '/var's)
av
umount: cannot forcibly umount /var: Device or resource busyy UNIFIX
cfi_cmdset_0001: Erase suspend on write eNET4.0 for
NET4: Linux TCP/IP 1.0
[yhttpd] stop requested......44100).2. (NAND) (C) 2001-200
Sending SIGKILL to all processes
IP Protocols: ICMP, UDP, TCP
Requesting system reboot->2006/03/15) Phillip Lo
Âdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS512 buckets, 4Kbytesrsion 2.6.1 (20010830) (yhttpd_core/1.2.0)
debug: BMon V1.0 mID 01izing core...o: i2c /dev
debug: feID 7a gtxID 0bash tables configured (est
debug: fpID 5a dsID 01-73.b2.3c.07.00.00-10lar)1820 based DVB-C frontend).rsion 0.04/08/01
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB)
[LCDFO:42:5d
Start
boot net failedter down :)d)io
Flash-FS bootstrap loader (v1.5)aded (max 8 devices)rver s
Unifo
Found Flash-FS superblock version 3.1: 7.00beta4-2.4ounting 'tmpfs' on '/t
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FSh memory: Found 2 x16 devic
[sectionsd] Cachingbank
debug: Got Block #0036
ide: Assuming 50MHz s
will verify ELF image, start= 0x800000, size= 166408
starting /bin/neutrino swit
cfi_cmds
verify sig: 262uspend
01.01.1
Branching to 0x40000 por
Unmounting 'jff
U-Boot 1.3.2 (Tuxbox) (Apr 19 2008 - 22:18:52)x 2 flash memory":d3: rom120.bin
dboxide: $Id:
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cach "BR bootlodriver mo
env: found "lcd_inverse"0
avia_av: $Id: avia_av_
env: found "lcd_contrast"1:36:22 carjay Exp $00
FB: ready
avia
[lcd
LCD: ready: PS/2 mouse
In: serialdebug: feID 7
Out: serial)
Err: serial
debug:Linu
Net: SCC ETHERNETsptsfix is off.00.0
Options:
1: Console on nullDP, TCP
avia_av_core
2: Console on ttyS0 thread.SWrev 0.81cam
3: Console on framebuffer
[LCDFONT] initializ
Select option (1-3), other keys to stop autoboot: 0av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:
..............................................................P for Linux NET
Data Size: 744586 Bytes = 727.1 kBstem bus speed for PIO modes
avia_gt_cor
Load Address: 00000000... GTX-FS superblock ver
Entry Point: 00000000tartet
dboxide: $Id:
Verifying Checksum ... OK02:15 dbt Exp $e busyutrino]
Uncompressing Kernel Image ... OKc,v 1.24 2003/09/30 05:452/kernel/or
Linux version 2.4.36.3-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #2 Sa 19. Apr 2
Options addr
1: Console on-Interface is a
avia_gt_pcm: $Id: avia_gt_pcm.
2:36:33 CEST 20089 !
On node 0 totalpa
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)8 zwen Exp $ompressed)
01.01.1970
avia_av: $Id: avi
Mount cache hash table entries: 512 (order: 0, 4096 bytes)ble flasheID 7a gtxID 0bB)
avia_gt_gv: set_input_mo
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)0 totalpa_av_core: Start
Console: switching to colour frame
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)ent.c,v 1.11 2003/10/26 16:32:51 obi Exp $= 1 v2 = 1 a2 =
z
POSIX conformance testing by UNIFIXia_gt_fb: fb0: AViA eNX/GTX Framebu
Linux NET4.0 for Linux 2.4/dev/mtdblock2 rootfstype=
Based upon Swansea University Computer Society NET3.039
avia_gt_core: $Id: avia_gt_core.c,
Initializing RT netlink socketay Exp $o au
lcd.o: init lcd d
Starting kswapd.
Flash-FS boo
Journalled Block Device driver loaded13/SED153X lcd interfaceGTX-FS superb
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)/60c,v 1.24 2003/09/30 05:452/kernel/o
D-Box 2 flash driver (size->0x800000 mem->0x10000000)lPakenham/
sq
O
/var/tuxbox/config/mybouquets.xml: No
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank3: Console on frame
i2c-core.o: i2c core m
hda: los
Select opt
Intel/Sharp Extended Query Table at 0x0035g as eve
avia_gt_capture: $Id: avi
cfi_cmdset_0001: Erase suspend on write enabled 19:17:15 seife Exp $ries driver module version
Creating 6 MTD partitions on "D-Box 2 flash memory":ia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $FS (
0x00000000-0x00020000 : "BR bootloader"] uncommitted_switch_mode 0ia_gt_vbi: $
0x00020000-0x00040000 : "FLFS (U-Boot)" v22 obi Exp $x1000
avia_gt_core: maski
0x00040000-0x006a0000 : "root (SquashFS_LZMA)"a_gt_core: Loaded AViA eNX/G
3 -> 16:9)720, he
0x006a0000-0x00800000 : "var (JFFS2)"[controld] setting VideoFormat to aut
0x00020000-0x00800000 : "Flash without bootloader"
[
[controld] format: 4:3(LB)Connec
0x00000000-0x00800000 : "Complete Flas
NET4: Unix do
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxtware update60k init, 0k highmem)(Fix1
[lcdd] date-skin not found -> using
dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $gumentv4l2: $
[LCDFONT] adding font /share/fonts/15B.pcf.
ide: late registration of driver. Warnung:
Inode cache hash table
dboxide: activating cs2T] Intializing font cac
dboxide: address space of IDE-Interface is at: 0xc38aa000e_Requester (Fix15/Bold) 512 (order: 0, 4096 bytes)
Probing IDE interface ide0...quester (Fix14/Bold): avia_av
hda: WDC WD5000AAKB-00YSA0, ATA DISK drive/event1: No such file or directory
ide0 at 0x010-0x017,0x04e on irq 47
[neutrino] menue setupia_gt_napi.c
hda: attached ide-disk driver.ideoFormat to auto
hda: host protected area => 1ntrold] format: 4:3(LB)
Thu
event: $Id: event.c,v 1.12 2003/09/30 candir: Noux
devfs: boo
[controld] VIDEO_EVENT_SIZE_CH
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapteret
[controld] format: 16:9ding l
sq
/var/tuxbox/c
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ 20:03:36 2008
i2c-core.o: i2c co
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $sleep for 1800 seconds.:17:15 seife Exp $ries driver module version
avia_av: AVIA500 sptsfix is offerrupt uncommitted_switch
hda:
avia_av_core: Starting avia_av_wdt thread. interruptasking unhandled ir
hda: 9767731
FLASH
avia_gt_ucode: ucode section filters disabled.
env: found "console"
avia_gt_core: masking unhandled irq reg 0 bit 6font cache...rr
env: found "dbox_duplex"
0x0
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...lcd_contrast"pture int
/bin/neutrino:
FB: ready.so.0: no ve
LCD: readyti
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ serial
NET4: Linu
Net: SCC ETHERNET/neutrino)
Options
avia_gt_gv: set_input_size (width=720, height=576) 2: Console on ttyS0ce createde hash tabl
3: Co
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ther keys to stop autoboot: 0stablished 2048 bind
avia_gt_gv: set_in
avia_gt_pcm_set_rate(44100)...........................
avia_gt_capture: $Id: avia_gt_capture.c,vtware update
dvb_i2c_bridge: enable
lcd.o: init lcd driver modulex I2C ad
dbox_duplex=0st prot
lcd.o: found KS0713/SED153X lcd interface0
even
Unmounting 'jffs2'.12 2003/09
m8x
jtginfo $Id: jtginfo.c,v 2.0 2008/04/16 22:16:44 jtgriker Exp $51 obi Exp $i2c-8xx]: mpc 8xx i2c i
m8xx_wdt: keep-alive trigge
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $/10 16:3
Console: colour dummy device 80x25Id: avia_av_proc.c,v 1.15 2
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Memory: 30672k available (1268k kernel code,
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ 2004/12/20 01:01:22 carjay Exp $
Dentry cache hash table en
avia_gt_pcm_set_rate(44100) bytes)2C
27.05.2008 17:53
/var/tuxbox/config/mybouquets.xml: No such file or directory (20010830)ng unhandled irq reg 1 bit 11
env: fo
av
[eitThread] pid 119 starttries driver module versi
$Id: zapit.cpp,v 1.409 2008/03/21 19:17:15 seife Exp $
avia_gt_uc
CPM UART driver version
[frontend] uncommitted_switch_mode 0S0 at 0x0280 is on SMC1 using BRGtty
avia_gt_core: masking unhandled irq reg 0 bit 7astg
avia_gt_core: masking unhandled irq reg 0
/tmp/currentservices.xml: No such file or directoryght=576)_dmx: warning,
half-duplex mode enabledFD2
[camd2] /var/keys/camd2.config not found, using defaults SCC2, 00:50:9c:42:5d:5c 82x32e
avia_g
[camd2] EMM : active.c,v 1
loop: loaded
[camd2] Socket=/tmp/camd.sock02fram
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)/
mice: PS/2 mouse device common for all micedirectoryde (mode=2) SCC
[LCDFONT] Intializing font cache... 1.0 for NET4.0nding SIGTERM to all
[yhttpd] Webserver starting...P, UDP, TCPble e
a
hda: lost interruptg cache hash table
/bin/neutrino: /lib/libpng12.so.0: no version information available (required byHash tables configured (established 2048 bind 4096)Con
Mount cache hash table e
/bin/neutrino)ice 82x
[ei
NET
starting /bin/neutrino1.0/SMP for Linux NET4
[neutrino] frameBuffer Instance createduffer fr
$Id:
VFS: Mounted root (squas
812k video mem readonly.ash
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[controld] setting VideoFormat to auto
[controld] format: 4:3(LB)
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[controld] format: 4:3(LB)
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file oavia_gt_core: masking unhandled irq reg 1 bit 15
r directory
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[controld] format: 16:9
Ich bring mein ide- Interface einfach nicht zum laufen. Hierbei handelt es sich um ein Interface von dbox2.net für meine Nokia box mit 2xI, 32mb und mit neuestem Jtg- Image (2.2.7). Den Fehler hda: lost interrupt bekomme ich nicht weg. Die Platte und Kapazität wird allerdings erkannt, kann aber nicht Formatieren oder Patitionieren. Hab bereits das Flachbandkabel mit Stecker zwischen Interface und Modem, sowie das Flachbandkabel für die Platte getauscht, meine Festplatte am Rechner geprüft und zur Sicherheit ne neue Platte ausprobiert, alle Löstellen des Interface nachgelötet aber alles ohne Erfolg (der Reihe nach wie geschrieben abgearbeitet). Ach ja, die 3,5 Zoll Platte ist von WD mit 500GB und mit externem Netzteil.
Ja, jetzt bin ich ratlos! Habt ihr noch ne Idee, was ich noch probieren, bzw. prüfen könnte???
Gruß
P.S. Hier mein Bootlog
[i2c-8xx]: mpc 8xx i2c initance createdtel/Sharp Exten
[i2c-8xx]: adapter: 003
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $s
812k video memedt
Calibra
[sect
avia_g
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $edLASH: 8 hours Extended Texte (1268k kernel code, 3
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).ght=576)MTD partitions on "D-Box 2 flash memory":he has
/var/tuxbox/c
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
S
[neutrino] Software update e"che hash table e
/var/tuxbox/
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $Console on ttyS0] No special S
Mount cache hash tab
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $...ete Flash"8/03/21 19:17:15 seife Exp $hash table e
Select opti (o
avia_av: AVIA500 sptsfix is offshare/fonts/12.pcf.gz...OK (Fix
avia_av_core: Starting avia_av_wdt thread.gt_core: masking unhandled irq re
mice: PS
avia_gt_ucode: ucode section filters disabled..11 2007/08/07 0onfigured
avia_gt_core: masking unhandled irq reg 0 bit 6font cache...th0: CPM ENET Ve
Kernel command li
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...9)0
loop: loaded (max
/bin/neutrino: /lib/libpng12.so.0: no
dboxide: activat
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
CPU:
event: $Id: eventx 2 flash
/bin/
hda: 976773168 sectors (50
avia_gt_gv: set_input_size (width=720, height=576)o] frameBuffer Instance createdtel/Sharp Extended
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $t_mode (mode=2)se suspend
hda: lost interrupt]: adapter: 0768 byt_in
avia_gt_pcm_set_rate(44100)576)MT
hda: lost interrupt
avia_gt_capture: $Id: avia_gt_capture.c,vtware update e
lcd.o: init lcd driver moduleernel memory: 6
hda: lost int
lcd.o: found KS0713/SED153X lcd interface 1 (32-bit)_gt_core: $Id: avia_gt_core.
jtginfo $Id: jtginfo.c,v 2.0 2008/04/16 22:16:44 jtgriker Exp $t interrupt01:01:22 carjay Expering as event clientorm Multi-Pl
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
[c
[LCDFONT] FTC_Face_Requester (Fix1
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $re: masking unh
avia_gt_dmx: $Id: avia_gt
dboxide: $Id: main.c
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $rnel command line:
[controld] VIDEO_EVENT_SIZE_CHANGE
half-duplex mo
avia_gt_pcm_set_rate(44100)xide:
at
WATCHDOG reset enabled_gt_captur
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directoryt> debug:obi Exp $d failed: Invalid anux 2.4
BOOTP/TFTP bootstra
/var/tuxbox/config/mybouquets.xml: No such file or directoryxp $
/dev/ide/host0/b
a0
debug $/disc:
debug:
[eitThread] pid 117 start via broadcast Exp $pport
$Id: zapit.cpp,v 1.409 2008/03/21 19:17:15 seife Exp $PS/2ve write-c
debug: Given up BOOTP/TFTP boot_gt_vbi:
[frontend] uncommitted_switch_mode 0v 1.11 2003/10/26
hda: lost interru
avia_gt_core: masking unhandled irq reg 0 bit 7
devfs:
hda: lost in
Flash-FS bootstrap l
/tmp/currentservices.xml: No such file or directoryocols: ICda: lost interru
Found Flash-FS superbloc
[camd] ca system id: 1722 cache hash table of 512e
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $ 0 (off)ore.o:
Found file /root/platform/nokia-dbox2/ker
[controld] Boxtype detected: (1, N
[neutrino] frameBuffer Instance created
debug: HWrev X5 SWrev 0.8
812k video memotected 63 sec
avia_gt_gv: set_input_mode (mode=2)
0x
avi
WATCHDOG reset e
avia_gt_gv: set_input_size (width=720, height=576)Exp $
BOOTP/TFTP bootstrap loader (v0
###
[neutrino] Software update enabledded to 0x100000B: registering fron
[neutrino] enable flashDVB-C fron
[lcdd] time-skin not found -> using default.../TFTP boot_gt_vbi: $Id: avia_gt_vbi.c,v 1
boot
[lcdd] weekday-skin not found -> using default...der (v1.5)
IP Protocol
Image Na
[lcdd] date-skin not found -> using default...ache hash table of 512
Found
Image Type:
[lcdd] month-skin not found -> usi
PES, queue 0 normal.WP: 0x1)ntend] uncom
avia_gt_core: masking unhandled irq reg 1 bit 15_oss.c,v 1.26 2004/05/31 22:56:
................
[neutrino] initialized everything..........
m8xx_wdt: keep-alive t
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)rotected
[controld] format: 16:9 0x100000
[sectionsd] getUTC: read: Connection timed out(order: 2, 16384 bytes) HTTP_PORT: 9080B: reg
hda: lost interrupt0 (VES1820 based DV
[timeThread] - 27.05.2008 20:07:28, tim: Tue May 27 20:07:28 2008
Image Name: dbox
Mount cache hash table entries: 512
[timeThread] Time set via DVB, going to sleep for 1800 seconds.
DVB
avia_gt_core: masking unhana
Data Size:
hda: lost interruptoxtype detect
hda: lost i
hda: lost interrupty UNIFIX3: UserDB(a
Adding Swap: 136544k swap-space (priority -1)r.
zone(1): 0 pages.or directoryors.
Linux
hda: lost interrupt
Kernel comm
XFS: bad magic number_options: 0x1DEO v1 =
XFS: SB validate failed0ectory
mount: mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: Invalid a.15
Decrementer Frequency = 252000000/6008/
avia_gt_pcm_5 seife Exp
[contro
m8x
rgumentshfs: v
/dev/ide/host0/bus0/target0/lun0/disc:$Id: avia_gt_capth_mode 001:01:22 carj
setting 32-bit IO_support flag to 1nstaling u
write-caching = 0 (off) entries: 2048 (order: 2,
[LCDFONT] FTC_Face_Requester (Fix12/Regular)1:22 obi Exp $ing unhandled
Mount cache has
zapit shot down :)2 (o
D-Box 2 flash
CXA2092 found 2 x16 device
CXA2092 found-bit bankBoxt
Unmounting 'tmpfs' on '/tmp'table entries: 1024 (order:
umount: cannot umount /tmp: Device or resource busy11:00:19 camR=benutzer
Page-cache h
Intel/Sharp Ex
Unmounting 'jffs2' on '/var's)
av
umount: cannot forcibly umount /var: Device or resource busyy UNIFIX
cfi_cmdset_0001: Erase suspend on write eNET4.0 for
NET4: Linux TCP/IP 1.0
[yhttpd] stop requested......44100).2. (NAND) (C) 2001-200
Sending SIGKILL to all processes
IP Protocols: ICMP, UDP, TCP
Requesting system reboot->2006/03/15) Phillip Lo
Âdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS512 buckets, 4Kbytesrsion 2.6.1 (20010830) (yhttpd_core/1.2.0)
debug: BMon V1.0 mID 01izing core...o: i2c /dev
debug: feID 7a gtxID 0bash tables configured (est
debug: fpID 5a dsID 01-73.b2.3c.07.00.00-10lar)1820 based DVB-C frontend).rsion 0.04/08/01
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB)
[LCDFO:42:5d
Start
boot net failedter down :)d)io
Flash-FS bootstrap loader (v1.5)aded (max 8 devices)rver s
Unifo
Found Flash-FS superblock version 3.1: 7.00beta4-2.4ounting 'tmpfs' on '/t
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FSh memory: Found 2 x16 devic
[sectionsd] Cachingbank
debug: Got Block #0036
ide: Assuming 50MHz s
will verify ELF image, start= 0x800000, size= 166408
starting /bin/neutrino swit
cfi_cmds
verify sig: 262uspend
01.01.1
Branching to 0x40000 por
Unmounting 'jff
U-Boot 1.3.2 (Tuxbox) (Apr 19 2008 - 22:18:52)x 2 flash memory":d3: rom120.bin
dboxide: $Id:
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cach "BR bootlodriver mo
env: found "lcd_inverse"0
avia_av: $Id: avia_av_
env: found "lcd_contrast"1:36:22 carjay Exp $00
FB: ready
avia
[lcd
LCD: ready: PS/2 mouse
In: serialdebug: feID 7
Out: serial)
Err: serial
debug:Linu
Net: SCC ETHERNETsptsfix is off.00.0
Options:
1: Console on nullDP, TCP
avia_av_core
2: Console on ttyS0 thread.SWrev 0.81cam
3: Console on framebuffer
[LCDFONT] initializ
Select option (1-3), other keys to stop autoboot: 0av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:
..............................................................P for Linux NET
Data Size: 744586 Bytes = 727.1 kBstem bus speed for PIO modes
avia_gt_cor
Load Address: 00000000... GTX-FS superblock ver
Entry Point: 00000000tartet
dboxide: $Id:
Verifying Checksum ... OK02:15 dbt Exp $e busyutrino]
Uncompressing Kernel Image ... OKc,v 1.24 2003/09/30 05:452/kernel/or
Linux version 2.4.36.3-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #2 Sa 19. Apr 2
Options addr
1: Console on-Interface is a
avia_gt_pcm: $Id: avia_gt_pcm.
2:36:33 CEST 20089 !
On node 0 totalpa
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)8 zwen Exp $ompressed)
01.01.1970
avia_av: $Id: avi
Mount cache hash table entries: 512 (order: 0, 4096 bytes)ble flasheID 7a gtxID 0bB)
avia_gt_gv: set_input_mo
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)0 totalpa_av_core: Start
Console: switching to colour frame
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)ent.c,v 1.11 2003/10/26 16:32:51 obi Exp $= 1 v2 = 1 a2 =
z
POSIX conformance testing by UNIFIXia_gt_fb: fb0: AViA eNX/GTX Framebu
Linux NET4.0 for Linux 2.4/dev/mtdblock2 rootfstype=
Based upon Swansea University Computer Society NET3.039
avia_gt_core: $Id: avia_gt_core.c,
Initializing RT netlink socketay Exp $o au
lcd.o: init lcd d
Starting kswapd.
Flash-FS boo
Journalled Block Device driver loaded13/SED153X lcd interfaceGTX-FS superb
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)/60c,v 1.24 2003/09/30 05:452/kernel/o
D-Box 2 flash driver (size->0x800000 mem->0x10000000)lPakenham/
sq
O
/var/tuxbox/config/mybouquets.xml: No
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank3: Console on frame
i2c-core.o: i2c core m
hda: los
Select opt
Intel/Sharp Extended Query Table at 0x0035g as eve
avia_gt_capture: $Id: avi
cfi_cmdset_0001: Erase suspend on write enabled 19:17:15 seife Exp $ries driver module version
Creating 6 MTD partitions on "D-Box 2 flash memory":ia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $FS (
0x00000000-0x00020000 : "BR bootloader"] uncommitted_switch_mode 0ia_gt_vbi: $
0x00020000-0x00040000 : "FLFS (U-Boot)" v22 obi Exp $x1000
avia_gt_core: maski
0x00040000-0x006a0000 : "root (SquashFS_LZMA)"a_gt_core: Loaded AViA eNX/G
3 -> 16:9)720, he
0x006a0000-0x00800000 : "var (JFFS2)"[controld] setting VideoFormat to aut
0x00020000-0x00800000 : "Flash without bootloader"
[
[controld] format: 4:3(LB)Connec
0x00000000-0x00800000 : "Complete Flas
NET4: Unix do
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xxtware update60k init, 0k highmem)(Fix1
[lcdd] date-skin not found -> using
dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $gumentv4l2: $
[LCDFONT] adding font /share/fonts/15B.pcf.
ide: late registration of driver. Warnung:
Inode cache hash table
dboxide: activating cs2T] Intializing font cac
dboxide: address space of IDE-Interface is at: 0xc38aa000e_Requester (Fix15/Bold) 512 (order: 0, 4096 bytes)
Probing IDE interface ide0...quester (Fix14/Bold): avia_av
hda: WDC WD5000AAKB-00YSA0, ATA DISK drive/event1: No such file or directory
ide0 at 0x010-0x017,0x04e on irq 47
[neutrino] menue setupia_gt_napi.c
hda: attached ide-disk driver.ideoFormat to auto
hda: host protected area => 1ntrold] format: 4:3(LB)
Thu
event: $Id: event.c,v 1.12 2003/09/30 candir: Noux
devfs: boo
[controld] VIDEO_EVENT_SIZE_CH
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapteret
[controld] format: 16:9ding l
sq
/var/tuxbox/c
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $ 20:03:36 2008
i2c-core.o: i2c co
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $sleep for 1800 seconds.:17:15 seife Exp $ries driver module version
avia_av: AVIA500 sptsfix is offerrupt uncommitted_switch
hda:
avia_av_core: Starting avia_av_wdt thread. interruptasking unhandled ir
hda: 9767731
FLASH
avia_gt_ucode: ucode section filters disabled.
env: found "console"
avia_gt_core: masking unhandled irq reg 0 bit 6font cache...rr
env: found "dbox_duplex"
0x0
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...lcd_contrast"pture int
/bin/neutrino:
FB: ready.so.0: no ve
LCD: readyti
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $ serial
NET4: Linu
Net: SCC ETHERNET/neutrino)
Options
avia_gt_gv: set_input_size (width=720, height=576) 2: Console on ttyS0ce createde hash tabl
3: Co
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $ther keys to stop autoboot: 0stablished 2048 bind
avia_gt_gv: set_in
avia_gt_pcm_set_rate(44100)...........................
avia_gt_capture: $Id: avia_gt_capture.c,vtware update
dvb_i2c_bridge: enable
lcd.o: init lcd driver modulex I2C ad
dbox_duplex=0st prot
lcd.o: found KS0713/SED153X lcd interface0
even
Unmounting 'jffs2'.12 2003/09
m8x
jtginfo $Id: jtginfo.c,v 2.0 2008/04/16 22:16:44 jtgriker Exp $51 obi Exp $i2c-8xx]: mpc 8xx i2c i
m8xx_wdt: keep-alive trigge
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $/10 16:3
Console: colour dummy device 80x25Id: avia_av_proc.c,v 1.15 2
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Memory: 30672k available (1268k kernel code,
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $ 2004/12/20 01:01:22 carjay Exp $
Dentry cache hash table en
avia_gt_pcm_set_rate(44100) bytes)2C
27.05.2008 17:53
/var/tuxbox/config/mybouquets.xml: No such file or directory (20010830)ng unhandled irq reg 1 bit 11
env: fo
av
[eitThread] pid 119 starttries driver module versi
$Id: zapit.cpp,v 1.409 2008/03/21 19:17:15 seife Exp $
avia_gt_uc
CPM UART driver version
[frontend] uncommitted_switch_mode 0S0 at 0x0280 is on SMC1 using BRGtty
avia_gt_core: masking unhandled irq reg 0 bit 7astg
avia_gt_core: masking unhandled irq reg 0
/tmp/currentservices.xml: No such file or directoryght=576)_dmx: warning,
half-duplex mode enabledFD2
[camd2] /var/keys/camd2.config not found, using defaults SCC2, 00:50:9c:42:5d:5c 82x32e
avia_g
[camd2] EMM : active.c,v 1
loop: loaded
[camd2] Socket=/tmp/camd.sock02fram
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)/
mice: PS/2 mouse device common for all micedirectoryde (mode=2) SCC
[LCDFONT] Intializing font cache... 1.0 for NET4.0nding SIGTERM to all
[yhttpd] Webserver starting...P, UDP, TCPble e
a
hda: lost interruptg cache hash table
/bin/neutrino: /lib/libpng12.so.0: no version information available (required byHash tables configured (established 2048 bind 4096)Con
Mount cache hash table e
/bin/neutrino)ice 82x
[ei
NET
starting /bin/neutrino1.0/SMP for Linux NET4
[neutrino] frameBuffer Instance createduffer fr
$Id:
VFS: Mounted root (squas
812k video mem readonly.ash
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[controld] setting VideoFormat to auto
[controld] format: 4:3(LB)
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[controld] setting VideoFormat to auto
[controld] format: 4:3(LB)
PES, queue 0 normal.
[CBasicClient] connect failed.
/tmp/camd.socket: No such file oavia_gt_core: masking unhandled irq reg 1 bit 15
r directory
[neutrino] initialized everything
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[controld] format: 16:9
-
- Tuxboxer
- Beiträge: 6044
- Registriert: Montag 17. November 2003, 06:48
Re: hda: lost interrupt Fehler
Flash Dir mal was legales auf die Box, vielleicht klappt es dann. Halte Dich an die Boardregeln!
cu
Jens
cu
Jens
-
- Neugieriger
- Beiträge: 5
- Registriert: Dienstag 27. Mai 2008, 20:41
Re: hda: lost interrupt Fehler
Sorry, ich hatte nicht gewusst, dass da was illegales drauf ist, bzw. ist es mir auch nicht ersichtlich. Habe mir jetzt direkt von Jtg das neuste Image runtergeladen und meine box neu geflasht. Jedoch mit dem gleichen problem wie vorher!
Hier die neue log:
nt: 00000000SGI XFS with
Verifying Checksum ... OK
[sectionsd]
Uncompressing Kernel Image ... OK
Linux version 2.4.36.3-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #2 Sa 19. Apr 2
[neutrino ide] /proc/mounts missing or ide device mountpoint not found
2:36:33 CEST 2008
On node 0 totalpages: 8192
[neutrino ide] Set
zone(0): 8192 pages.t: /hdd
zone(1): 0 pages.
[
zone(2): 0 pages. read: Connection
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigge: 0x1000)
Console: colour dummy device 80x25
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Co
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 pt
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:5d:5c
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS_LZMA)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.10.1 (2008-04-19 22:17:14 CEST)
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38aa000
Probing IDE interface ide0...
hda: WDC WD5000AAKB-00YSA0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $] sfdisk completed successful
avia_gt_core: masking unhandled irq reg 1 bit 11bytes
avia_gt_core: masking unhandled irq reg 1 bit 13
[sectionsd] getUTC: read: Connection timed out
avia_gt_ucode: loaded ucode vB107
hda: lost interrupt
avia_gt_ucode: ucode section filters disabled.
hda: lost interrupt
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
[sectionsd] getUTC: read: Connection timed out
avia_gt_core: masking unhandled irq reg 0 bit 6
hda: lost interrupt
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $d: Connection timed out
avia_gt_gv: set_input_size (width=720, height=576)nterrupt
hda: lost interrupt
hda:
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
hda: lost interrupt
[sectionsd] getUTC: read
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $hda: lost interrupt
hda: lost interrupt
avia_gt_core: Loaded AViA eNX/GTX driver
[sectionsd] getUTC: read: Connec
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $terrupt
hda: lost interrupt
hda: l
avia_gt_gv: set_input_mode (mode=2)ctionsd] getUTC: read: Connection t
avia_gt_gv: set_input_size (width=720, height=576)
hda: lost interrupt
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
hda: lost interrupt
hda: lost interrupt
avia_gt_pcm_set_rate(44100) interrupt
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
hda: lost interrupt
hda: l
DVB: VES1820(0): pwm=0x48
hda: lost interrup
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...tionsd] getUTC: read: Connection timed out
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $nterrupt
hda: lost interrupt
[section
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
hda: lost interrupt
hda: lost interrupt
Thu Jan 1 12:00:00 CET 1970rupt
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
will verify ELF image, start= 0x800000, size= 166408
/tmp/currentservices.xml: No such file or directoryrify sig: 262
Branching to 0x40000
[camd] ca system id: 1722t 1.3.2 (Tuxbox) (Apr 19
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 k
[controld] Boxtype detected: (1, Nokia D-BOX2)
Board: DBOX2, Nokia, BMo
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
I2C: ready
DRAM: 32 MB
FLASH: 8
[controld] format: 4:3(LB)FS2 FS: . .
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
env: found "baudrate"
env
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
Hier die neue log:
nt: 00000000SGI XFS with
Verifying Checksum ... OK
[sectionsd]
Uncompressing Kernel Image ... OK
Linux version 2.4.36.3-dbox2 (vom Jtg-Team) (gcc version 3.4.6) #2 Sa 19. Apr 2
[neutrino ide] /proc/mounts missing or ide device mountpoint not found
2:36:33 CEST 2008
On node 0 totalpages: 8192
[neutrino ide] Set
zone(0): 8192 pages.t: /hdd
zone(1): 0 pages.
[
zone(2): 0 pages. read: Connection
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigge: 0x1000)
Console: colour dummy device 80x25
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Co
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 pt
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:42:5d:5c
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS_LZMA)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.10.1 (2008-04-19 22:17:14 CEST)
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.11 2007/08/07 09:02:15 dbt Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc38aa000
Probing IDE interface ide0...
hda: WDC WD5000AAKB-00YSA0, ATA DISK drive
ide0 at 0x010-0x017,0x04e on irq 47
hda: attached ide-disk driver.
hda: host protected area => 1
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $] sfdisk completed successful
avia_gt_core: masking unhandled irq reg 1 bit 11bytes
avia_gt_core: masking unhandled irq reg 1 bit 13
[sectionsd] getUTC: read: Connection timed out
avia_gt_ucode: loaded ucode vB107
hda: lost interrupt
avia_gt_ucode: ucode section filters disabled.
hda: lost interrupt
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
[sectionsd] getUTC: read: Connection timed out
avia_gt_core: masking unhandled irq reg 0 bit 6
hda: lost interrupt
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $d: Connection timed out
avia_gt_gv: set_input_size (width=720, height=576)nterrupt
hda: lost interrupt
hda:
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
hda: lost interrupt
[sectionsd] getUTC: read
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $hda: lost interrupt
hda: lost interrupt
avia_gt_core: Loaded AViA eNX/GTX driver
[sectionsd] getUTC: read: Connec
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $terrupt
hda: lost interrupt
hda: l
avia_gt_gv: set_input_mode (mode=2)ctionsd] getUTC: read: Connection t
avia_gt_gv: set_input_size (width=720, height=576)
hda: lost interrupt
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
hda: lost interrupt
hda: lost interrupt
avia_gt_pcm_set_rate(44100) interrupt
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
hda: lost interrupt
hda: l
DVB: VES1820(0): pwm=0x48
hda: lost interrup
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...tionsd] getUTC: read: Connection timed out
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $nterrupt
hda: lost interrupt
[section
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
hda: lost interrupt
hda: lost interrupt
Thu Jan 1 12:00:00 CET 1970rupt
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
will verify ELF image, start= 0x800000, size= 166408
/tmp/currentservices.xml: No such file or directoryrify sig: 262
Branching to 0x40000
[camd] ca system id: 1722t 1.3.2 (Tuxbox) (Apr 19
$Id: controld.cpp,v 1.130 2008/01/03 11:09:27 seife Exp $
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 k
[controld] Boxtype detected: (1, Nokia D-BOX2)
Board: DBOX2, Nokia, BMo
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
I2C: ready
DRAM: 32 MB
FLASH: 8
[controld] format: 4:3(LB)FS2 FS: . .
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
env: found "baudrate"
env
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[neutrino] initialized everything
[sectionsd] getUTC: read: Connection timed out
hda: lost interrupt
-
- Erleuchteter
- Beiträge: 453
- Registriert: Mittwoch 27. Juni 2007, 15:25
Re: hda: lost interrupt Fehler
Sehr wahrscheinlich ein falsch gestecktes Kabel auf dem Modemport (nicht genau mittig sondern eine Pinreihe versetzt nach oben unten gesteckt).
-
- Neugieriger
- Beiträge: 5
- Registriert: Dienstag 27. Mai 2008, 20:41
Re: hda: lost interrupt Fehler
Das ist es ja eben, das Kabel ist auf der Modemseite sowie auf der Interfaceseite 100%ig richtig drauf. Weder versetzt noch halb draufgesetzt. Das Flachbandkabel sowie die beiden Stecker hab ich bereits auch erneuert!Ich hab ja schon soweit alles probiert, doch bin ich jeztzt mit meinem latain am ende. Hat es hier schon jemand gehabt, dass das Interface selbst nen schuss gehabt hat?
-
- Erleuchteter
- Beiträge: 453
- Registriert: Mittwoch 27. Juni 2007, 15:25
Re: hda: lost interrupt Fehler
Aus dem Log geht hervor das der IRQ für das Interface fehlt. Also entweder Softwarefehler oder Hardwarefehler.
Es ist mit unter ausreichend wenn die Box einmal mit falsch eingesteckten Modemkabel eingeschaltet wird.
Bereits dadurch kann das Interface bechädigt werden.
Dieses Problem besteht bisher nur bei Nokia.
Da die IDE-Interfaces vor dem Versand von Jörg, Ralf und mir getestet werden, ist eine Beschädigung vom IDE-Interface eigentlich nur durch den falschen Einbau möglich.
Das kann ich aber hier jederzeit feststellen.
Gruß Basti
Es ist mit unter ausreichend wenn die Box einmal mit falsch eingesteckten Modemkabel eingeschaltet wird.
Bereits dadurch kann das Interface bechädigt werden.
Dieses Problem besteht bisher nur bei Nokia.
Da die IDE-Interfaces vor dem Versand von Jörg, Ralf und mir getestet werden, ist eine Beschädigung vom IDE-Interface eigentlich nur durch den falschen Einbau möglich.
Das kann ich aber hier jederzeit feststellen.
Gruß Basti
-
- Tuxboxer
- Beiträge: 4332
- Registriert: Dienstag 7. Mai 2002, 17:04
Re: hda: lost interrupt Fehler
Würd ich nich machen wenn noch Gewährleistung nach deutschem Recht drauf war.ausprobiert, alle Löstellen des Interface nachgelötet aber alles ohne Erfolg
-
- Neugieriger
- Beiträge: 5
- Registriert: Dienstag 27. Mai 2008, 20:41
Re: hda: lost interrupt Fehler
Ja gerne Basti! Und wie?
-
- Erleuchteter
- Beiträge: 453
- Registriert: Mittwoch 27. Juni 2007, 15:25
Re: hda: lost interrupt Fehler
Was wie ?
-
- Neugieriger
- Beiträge: 5
- Registriert: Dienstag 27. Mai 2008, 20:41
Re: hda: lost interrupt Fehler
Ist es möglich, das Interface ein zu schicken um zu checken und evtl. wieder zu raparieren?
-
- Erleuchteter
- Beiträge: 453
- Registriert: Mittwoch 27. Juni 2007, 15:25
Re: hda: lost interrupt Fehler
Ja, das ist möglich.
Besser wäre evtl. das Interface gleich mit der Box einzuschicken.
Gruß Basti
Besser wäre evtl. das Interface gleich mit der Box einzuschicken.
Gruß Basti