DBox2 Nokia geht unmittelbar nach Booten in Standby

Boxenweitwurf
lightmick
Neugieriger
Neugieriger
Beiträge: 11
Registriert: Donnerstag 22. Januar 2004, 21:22

DBox2 Nokia geht unmittelbar nach Booten in Standby

Beitrag von lightmick »

Hallo zusammen,

ich hoffe, Ihr könnt mir helfen.
Ich habe heute eine "neue" DBox2 Nokia gekauft, die meine defekte ersetzen soll.
Leider bootet die Box zwar, jedoch geht sie dann, wenn eigentlich ein Bild kommen sollte, in den Standby Modus.

Mein testweise geflashtes JTG Image zeigt den gleichen Fehler.

Könnt Ihr Euch bitte mal das Bootlog anschauen und eine Diagnose wagen?
Herzlichen Dank vorab und viele Grüße

Michael.

Code: Alles auswählen

ódebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS                                                                 
ebug: BMon V1.0  mID 01                       
debug: feID 7a    gtxID 0b                          
debug: fpID 5a     dsID 01-7e.dd.2d.07.00.00-93                                               
debug: HWrev X5  SWrev 0.81                           
debug: B/Ex/Fl(MB) 32/00/08                           
WATCHDOG reset enabled                      
dbox2:root> debug:                  
BOOTP/TFTP bootstrap loader (v0.3)                                  
debug:      
debug:debug: Given up BOOTP/TFTP boot                                     
boot net failed               

Flash-FS bootstrap loader (v1.5)                                

Found Flash-FS superblock version 3.1                                     
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS                                                           
debug: Got Block #0032                      

will verify ELF image, start= 0x800000, size= 158020                                                    
verify sig: 262               
Branching to 0x40000                    


U-Boot 1.1.4 (Tuxbox) (Aug  7 2006 - 21:15:08)                                              

CPU:   PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache                                                           
         *** Warning: CPU Core has Silicon Bugs -- Check the Errata ***                                                                       
Board: DBOX2, Nokia, BMon V1.0                              
       Watchdog enabled                       
I2C:   ready            
DRAM:  32 MB            
FLASH:  8 MB            
Scanning JFFS2 FS: . done.                          
FB:    ready            
LCD:   ready            
In:    serial             
Out:   serial             
Err:   serial             
Net:   SCC ETHERNET                   

Options:        
  1: Console on null                    
  2: Console           
  3: Console on framebuffer                           
Select option (1-3), other keys to stop autoboot:  0                                                    
### FS (squashfs) loading 'vmlinuz' to 0x100000                                               
### FS load complete: 679117 bytes loaded to 0x100000                                                     
...............................................................                                                               
Un-Protected 63 sectors                       
## Booting image at 00100000 ...                                
   Image Name:   dbox2                      
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)                                                             
   Data Size:    679053 Bytes = 663.1 kB                                        
   Load Address: 00000000                         
   Entry Point:  00000000                         
   Verifying Checksum ... OK                            
   Uncompressing Kernel Image ... OK                                    
Linux version 2.4.33.3-dbox2 (vom Jtg-Team)  (gcc version 3.4.4) #1 Do Okt 19 10                                                                                
:49:00 CEST 2006                
On node 0 totalpages: 8192                          
zone(0): 8192 pages.                    
zone(1): 0 pages.                 
zone(2): 0 pages.                 
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs                                                                          
Decrementer Frequency = 252000000/60                                    
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)                                                   
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)                                                     
Console: colour dummy device 80x25                                  
Calibrating delay loop... 66.96 BogoMIPS                                        
Memory: 30800k available (1152k kernel code, 356k data, 60k init, 0k highmem)                                                                             
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)                                                             
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)                                                            
Mount cache hash table entries: 512 (order: 0, 4096 bytes)                                                          
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)                                                            
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)                                                           
POSIX conformance testing by UNIFIX                                   
Linux NET4.0 for Linux 2.4                          
Based upon Swansea University Computer Society NET3.039                                                       
Initializing RT n               
Starting kswapd               
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)                                                             
devfs: boot_options: 0x1                        
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.                                                     
squashfs: version 3.0 (2006/03/15) Phillip Lougher                                                  
i2c-core.o: i2c core module version 2.6.1 (20010830)                                                    
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)                                                                  
CPM UART driver version 0.04                            
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2                                                                          
pty: 256 Unix98 ptys configured                               
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43                                                    
loop: loaded (max 8 devices)                            
D-Box 2 flash driver (size->0x800000 mem->0x10000000)                                                     
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank                                                               
 Intel/Sharp Extended Query Table at 0x0035                                           
cfi_cmdset_0001: Erase suspend on write enabled                                               
Creating 6 MTD partitions on "D-Box 2 flash memory":                                                    
0x00000000-0x00020000 : "BR bootloader"                                       
0x00020000-0x00040000 : "FLFS (U-Boot)"                                       
0x00040000-0x006a0000 : "root (SquashFS)"                                         
0x006a0000-0x00800000 : "var (JFFS2)"                                     
0x00020000-0x00800000 : "Flash without bootloader"                                                  
0x00000000-0x00800000 : "Complete Flash"                                        
Linux video capture interface: v1.00                                    
mice: PS/2 mouse device common for all mice                                           
NET4: Linux TCP/IP 1.0 for NET4.0                                 
IP Protocols: ICMP, UDP, TCP                            
IP: routing cache hash table of 512 buckets, 4Kbytes                                                    
TCP: Hash tables configured (established 2048 bind 4096)                                                        
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.                                                   
VFS: Mounted root (squashfs filesystem) readonly.                                                 
Mounted devfs on /dev                     
Freeing unused kernel memory: 60k init                                      
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-                                                          
Starting the automounter                        
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4                                                           
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx                                                                           
dboxide: $Id: main.c,v 1.10 2006/10/04 00:36:41 carjay Exp $                                                            
ide: late registration of driver.                                 
dboxide: activating cs2                       
dboxide: address space of DBox2 IDE CPLD is at: 0xc38b1000                                                          
dboxide: probing dbox2 IDE CPLD: walking bit test failed: fffffffe != ebffffdc                                                                              
dboxide: not a valid dbox2 IDE CPLD detected                                            
SGI XFS with no debug enabled                             
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such f                                                                                
ile or directory                
/dev/ide/host0/bus0/target0/lun0/disc: No such file or directory                                                                
Thu Jan  1 12:00:00 CET 1970                            
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $                                                        
[i2c-8xx]: mpc 8xx i2c init                           
[i2c-8xx]: adapter: 0                     
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $                                                 
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $                                                     
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).                                                                     
dvb_i2c_bridge: enabled DVB i2c bridge to Po                                           
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $                                                   
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $                                                                    
avia_av: AVIA500 sptsfix is off                               
avia_av_core: Starting avia_av_wdt thread.                                          
avia_av: microcode verify: 25293 errors.                                        
avia_av: timeout waiting for decoder init to complete. (b9b62ace)                                                                 
insmod: init_module: avia_av: Input/output error                                                
insmod: unresolved symbol avia_av_set_stc                                         
insmod: unresolved symbol avia_gt_gv_copyarea                                             
insmod: unresolved symbol avia_gt_gv_show                                         
insmod: unresolved symbol avia_gt_g                                  
insmod: unresolved symbol avia_gt_gv_get_blevel                                               
insmod: unresolved symbol avia_gt_gv_set_input_size                                                   
insmod: unresolved symbol avia_gt_gv_set_pos                                            
insmod: unresolved symbol avia_gt_gv_hide                                         
insmod: unresolved symbol avia_gt_get_info                                          
insmod: unresolved symbol avia_gt_gv_set_size                                             
insmod: unresolved symbol avia_gt_gv_set_input_mode                                                   
insmod: unresolved symbol avia_gt_gv_set_clut                                             
insmod: unresolved symbol avia_gt_gv_set_blevel                                               
insmod: unresolved symbol avia_gt_gv_get_info                                             
lcd.o: init lcd driver module                             
lcd.o: found KS0713/SED153X lcd interface                                         
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $                                                               
insmod: unresolved symbol avia_gt_ir_exit                                         
insmod: unresolved symbol avia_gt_ir_receive_pulse                                                  
insmod: unresolved symbol avia_gt_ir_receive_data                                                 
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position                                                                 
insmod: unresolved symbol avia_gt_ir_send_buffer                                                
insmod: unresolved symbol avia_gt_ir_queue_pulse                                                
insmod: unresolved symbol avia_gt_ir_init                                         
insmod: unresolved symbol avia_gt_ir_set_duty_cycle                                                   
insmod: unresolved symbol avia_gt_ir_set_frequency                                                  
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position                                                                
insmod: unresolved symbol avia_av_set_sample_rate                                                 
insmod: unresolved symbol avia_gt_pcm_play_buffer                                                 
insmod: unresolved symbol avia_gt_pcm_stop                                          
insmod: unresolved symbol avia_gt_pcm_set_signed                                                
insmod: unresolved symbol avia_gt_pcm_set_endian                                                
insmod: unresolved symbol avia_gt_pcm_set_rate                                              
insmod: unresolved symbol avia_gt_pcm_set_width                                               
insmod: unresolved symbol avia_gt_pcm_poll                                          
insmod: unresolved symbol avia_gt_pcm_set_channels                                                  
insmod: unresolved symbol avia_av_get_sample_rate                                                 
insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation                                                         
insmod: unresolved symbol avia_gt_pcm_get_block_size                                                    
insmod: unresolved symbol avia_gt_pig_show                                          
insmod: unresolved symbol avia_gt_pig_set_stack                                               
insmod: unresolved symbol avia_gt_pig_set_size                                              
insmod: unresolved symbol avia_gt_pig_set_pos                                             
insmod: unresolved symbol avia_gt_pig_hide                                          
DVB: VES1820(0): pwm=0x48                         
DVB: registering frontend 0:0 (VES1820 based DVB-C f                                                   
insmod: unresolved symbol avia_av_stream_type_set                                                 
insmod: unresolved symbol avia_av_register_video_event_handler                                                              
insmod: unresolved symbol avia_av_set_audio_attenuation                                                       
insmod: unresolved symbol avia_av_write                                       
insmod: unresolved symbol avia_av_pid_set                                         
insmod: unresolved symbol avia_av_audio_pts_to_stc                                                  
insmod: unresolved symbol avia_gt_dmx_queue_write                                                 
insmod: unresolved symbol avia_gt_dmx_enable_clip_mode                                                      
insmod: unresolved symbol avia_gt_dmx_disable_clip_mode                                                       
insmod: unresolved symbol avia_av_play_state_set_video                                                    
insmod: unresolved symbol avia_av_unregister_video_event_handler                                                                
insmod: unresolved symbol avia_av_get_video_size                                                
insmod: unresolved symbol avia_av_play_state_set_audio                                                      
insmod: unresolved symbol avia_av_read                                      
insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation                                                          
insmod: unresolved symbol avia_av_new_audio_config                                                  
insmod: unresolved symbol avia_av_set_video_system                                                  
insmod: unresolved symbol avia_av_bypass_mode_set                                                 
insmod: unresolved symbol avia_av_sync_mode_set                                               
insmod: unresolved symbol avia_gt_dmx_queue_nr_get                                                
insmod: unresolved symbol avia_gt_dmx_get_ucode_info                                                    
insmod: unresolved symbol avia_gt_vbi_start                                           
insmod: unresolved symbol avia_gt_dmx_queue_reset                                                 
insmod: unresolved symbol avia_av_napi_decoder_stop                                                   
insmod: unresolved symbol avia_gt_dmx_queue_stop                                                
insmod: unresolved symbol avia_gt_dmx_queue_irq_enable                                                      
insmod: unresolved symbol avia_gt_dmx_set_pcr_pid                                                 
insmod: unresolved symbol avia_gt_vbi_stop                                          
insmod: unresolved symbol avia_av_audio_pts_to_stc                                                  
insmod: unresolved symbol avia_gt_dmx_queue_write                                                 
insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext                                                          
insmod: unresolved symbol avia_gt_dmx_enable_clip_mode                                                      
insmod: unresolved symbol avia_gt_dmx_disable_framer                                                    
insmod: unresolved symbol avia_gt_dmx_disable_clip_mode                                                       
insmod: unresolved symbol avia_av_napi_decoder_start                                                    
insmod: unresolved symbol avia_gt_dmx_queue_start                                                 
insmod: unresolved symbol avia_gt_dmx_tap                                         
insmod: unresolved symbol avia_gt_get_info                                          
insmod: unresolved symbol avia_gt_dmx_enable_framer                                                   
insmod: unresolved symbol avia_gt_dmx_alloc_queue_vide                                                    
insmod: unresolved symbol avia_gt_dmx_free_queue                                                
insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio                                                       
insmod: unresolved symbol avia_gt_dmx_alloc_queue_user                                                      
insmod: unresolved symbol avia_gt_dmx_get_stc                                             
insmod: unresolved symbol avia_gt_accel_crc32                                             
insmod: unresolved symbol avia_gt_napi_dvr_send                                               
insmod: unresolved symbol avia_av_write                                       
insmod: unresolved symbol avia_gt_set_playback_mode                                                   
insmod: unresolved symbol avia_gt_get_playback_mode                                                   
insmod: unresolved symbol avia_av_is500                                       
insmod: unresolved symbol avia_av                                
insmod: unresolved symbol avia_av_new_audio_config                                                  
insmod: unresolved symbol avia_av_cmd                                     
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $                                                            
[sectionsd] Caching max 6000 events                                   
[sectionsd] Caching 14 days                           
[sectionsd] Events are old 60min after their end time                                                     
[sectionsd] open dmx: No such file or directory                                               
[sectionsd] getUTC: open: No such file or directory                                                   
[sectionsd] open dmx: No such file or directory                                               
[sectionsd] open dmx: No such file or directory                                               
[sectionsd] open dmx: No such file or directory                                               
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $                                                        
[sectionsd] getUTC: open: No such file or directory                                                   
[sectionsd] getUTC: open: No such file or directory                                                   
/tmp/currentservices.xml: No such file or directory                                                   
[audio.cpp:CAudio:34] /dev/dvb/adapter0/audio0: No such file or directory                                                                         
[video.cpp:CVideo:33] /dev/dvb/adapter0/video0: No such file or directory                                                                         
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory                                                                      
[camd] /dev/dvb/adapter0/demux0: No such file or directory                                                          
[sectionsd] getUTC: open: No such file or directory                                                   
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $                                                        

[controld] Boxtype detected: (1, Nokia D-BOX2)                                              
[controld] /dev/dvb/adapter0/video0: No such file or directory                                                              
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1                                                                       
[controld] /dev/dvb/adapter0/video0: No such file or directory                                                              
[sectionsd] getUTC: open: No such file or directory                                                   
[sectionsd] getUTC: open: No such file or directory                                                   
[y1234d] Webserver n1234d/3.0.5 (y1234d_core/1.1.1)                                                   
[LCDFONT] initializing core...                              
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)                                                                   
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)                                                                     
[LCDFONT] adding font /share/fonts/pakenham.ttf...[sectionsd] getUTC: open: No s                                                                                
uch file or directory                     
OK (Pakenham/Regular)                     
[LCDFONT] Intializing font cache...                                   
[ConfigFile] Unable to open file /var/tuxbox/config/n1234d.conf for reading.                                                                            
[sectionsd] getUTC: open: No such file or directory                                                   
[y1234d] Webserver starting...                              
[sectionsd] getUTC: open: N                          
[sectionsd] getUTC: open: No such file or directory                                                   
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by                                                                                
 /bin/neutrino)               
[sectionsd] getUTC: open: No such file or directory                                                   
[sectionsd] getUTC: open: No such file or directory                                                   
[neutrino] frameBuffer Instance created                                       
/dev/fb/0: No such file or directory                                    
framebuffer not available.                          
FBIOPUT_VSCREENINFO: Bad file descriptor                                        
FBIOGET_FSCREENINFO: Bad file descriptor                                        
[neutrino] Error while setting framebuffer mode                                               
zapit shot down :)                  
[sectionsd] getUTC: open: No such file or directory                                                   
Waiting for controld (max. 5 seconds)                                     
[sectionsd] getUTC: open: No such file or directory                                                   
Waiting for controld (max. 4 seconds)                                     
[sectionsd] getUTC: open: No such file or directory                                                   
Waiting for controld (max. 3 seconds)                                     
[sectionsd] getUTC: open: No such file or directory                             
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 2 seconds)
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 1 seconds)
[sectionsd] getUTC: open: No such file or directory
Going to halt system now ...
Starting pid 180, console /dev/console: '/etc/init.d/halt'
CXA2092 found
[sectionsd] getUTC: open: No such file or directory
CXA2092 found
Unmounting 'tmpfs' on '/tmp'
umount: Couldn't umount /tmp: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Unmounting 'jffs2' on '/var'
[sectionsd] getUTC: open: No such file or directory
Ready to shutdown system...
The system is going down NOW !![ConfigFile] Unable to open file /var/tuxbox/conf
ig/controld.conf for writing.
[y1234d] !!! SIGNAL !!! :15!
[y1234d] No special SIGNAL-Handler:15!
[y1234d] stop requested......
Sending SIGKILL to all processes.
Requesting system halt.
D-Box 2, Nokia, 2x Intel, Avia 500
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Re: DBox2 Nokia geht unmittelbar nach Booten in Standby

Beitrag von mash4077 »

lightmick hat geschrieben:

Code: Alles auswählen

avia_av: microcode verify: 25293 errors.
Hi,

entweder ist der Ucode korrupt oder der Avia hat einen Defekt.

Gruß
mash
lightmick
Neugieriger
Neugieriger
Beiträge: 11
Registriert: Donnerstag 22. Januar 2004, 21:22

Beitrag von lightmick »

Hallo,

vielen Dank.
Mit einem Yadi-Image ohne meine Ucodes startet die Box und zeigt einen grünen Bildschirm, meckert, dass die Ucodes bnicht vorhanden sind.

Spiele ich sie drauf, zeigt sich wieder das Problem, dass die Box in Standby geht.

Da wirds wohl den Avia zerhackt haben.

Habe mal durchs Gitter auf den Avia geschaut.
Das sieht so aus, als hätte jemand daran rumgelötet, da man Flussmittel rund um den Chip sehen kann.

Ich habe dem Händler eine E-Mail geschrieben und um Austausch der Box gebeten.

Am Montag weiß ich mehr...

Herzliche Grüße
Micha
D-Box 2, Nokia, 2x Intel, Avia 500