Erstmal moechte ich alle hier begrueßen.
Dann gleich zur Sache. Ich will mit dem Win Bootmanager die ucodes aufspielen bevor ich die Kiste flashe. Nun sagt der Bootmanager aber ich haette keine ftp Verbindung.Mit der OS und ucodes auslesen hat gut geklappt. Meine Einstellungen sind folgende:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-fd.2e.bc.07.00.00-a6
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.47, My IP 192.168.5.45
debug: Sending TFTP-request for file C/dbox3/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3a-d6-6b
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.5.47; our IP address is 192.168.5.45
Filename 'C/dbox3/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.5.47; our IP address is 192.168.5.45
Filename 'C/dbox3/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.5.47; our IP address is 192.168.5.45
Filename 'C/dbox3/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.5.47:C/dbox3/cdkr
oot/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.5.47:C/dbox3
/cdkroot/
time_init: decrementer frequency = 247500000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:3a:d6:6b
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found no CFI device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.5.47, my address is 192.168.5.45
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.5.47
Looking up port of RPC 100005/2 on 192.168.5.47
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
init started: BusyBox v0.60.2 (2002.02.26-14:29+0000) multi-call
dbox2miniroot zum Flash auslesen v1.0
linux@dbox2 Project http://dbox2.elxsi.de
Wilkommen auf ihrer dbox2
druecken sie bitte einmal Enter
und danach geben sie ein
cat /dev/mtd/5 >/flash.img
das dauert ca 2 bis 5 minuten
dann kommt die Raute wieder
dann befindet sich in c: dbox2 cdkroot
die Datei flash.img , die ganz genau 8257536 Bytes
gross sein solte !
das ist dann ihr backup Flashimage das sie gut aufheben sollten
danach koennen sie die dbox2 einfach ausmachen
Please press Enter to activate this console.
BusyBox v0.60.2 (2002.02.26-14:29+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# help
Built-in commands:
-------------------
. : alias break builtin cd chdir continue eval exec exit export
false fc hash help jobs let local read readonly return set setvar
shift times trap true type ulimit umask unalias unset wait
#
Ich habe eine Sagem Cabel Box mit einem Intel Flash.
Ware echt klasse wenn mir da jemand helfen koennte.
