Die Suche nach dem Problem ergab zwar einige Treffer nur habe ich weiterhin folgendes Problem:
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID XX-XX.XX.XX.XX.XX.XX-XX
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 13 debug: 1 debug:
debug: Unknown RFC1048-tag debug: f debug: a debug: 66 debug: 74 debug: 6c debug: 6e debug: 2e debug: 6c debug: 6f debug: 63 debug: 61 debug: 6c debug:
debug: Got BOOTP reply from Server IP 192.168.19.100, My IP 192.168.19.33
debug: Sending TFTP-request for file u-boot
debug: Got Block #0050
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
will verify ELF image, start= 0x800000, size= 137156
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Mar 2 2006 - 08:36:16)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
DHCP client bound to address 192.168.19.33
Using SCC ETHERNET device
TFTP from server 192.168.19.100; our IP address is 192.168.19.33
Filename 'u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.19.100; our IP address is 192.168.19.33
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
can't find logo
BOOTP broadcast 1
DHCP client bound to address 192.168.19.33
Using SCC ETHERNET device
TFTP from server 192.168.19.100; our IP address is 192.168.19.33
Filename 'u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.19.100; our IP address is 192.168.19.33
Filename 'logo-fb'.
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
can't find logo
Options:
1: console on ttyS0
2: console on fb0
3: console on null
Select option (1-3), other keys to stop autoboot: 1 0
BOOTP broadcast 1
DHCP client bound to address 192.168.19.33
Using SCC ETHERNET device
TFTP from server 192.168.19.100; our IP address is 192.168.19.33
Filename 'u-boot'.
Load address: 0x100000
Loading: *Using SCC ETHERNET device
TFTP from server 192.168.19.100; our IP address is 192.168.19.33
Filename 'u-boot'.
Load address: 0x100000
Loading: *###########################
done
Bytes transferred = 137156 (217c4 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>
Info: ohne --with-targetruleset-flash
Muss man an den ucode Sourcen noch was drehen oder woran kann das liegen?
Wenn ich kernel-cdk laden möchte, an Stelle von u-boot, dann endet das booten mit folgender Meldung:
boot net: boot file has no valid signature
gruß
flasher