Was ist das, wozu brauche ich's und woher kriege ich's?
Gruss,
Dieter
[debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2b.5d.b9.07.00.00-72
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.1.2, My IP 192.168.1.1
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-31-df-57
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again
BOOTP broadcast 2
TFTP from server 192.168.1.2; our IP address is 192.168.1.1
Filename 'C/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: T T T T T T T T T
Retry count exceeded; starting again