Senderscan bringt bloß ca. 500 Kanäle. Einige, wenige Sender (REAL MADRID TV)funktionieren broblemlos, bei den einigen zeigt die D-Box ein Artfaktreiches (Stand-)Bild (Bibel TV) und beim Rest das allseits bekannte "Kanal (zur Zeit) nicht verfügbar"
Betanova zurück auf die Box; "UD4"
Philipsbox an den Anschluß; funktioniert bestens!
Hier ein Bootlog:
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-38.7a.ba.07.00.00-51
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 158620
verify sig: 263
Branching to 0x40000
U-Boot 1.1.1 (TuxBox) (Oct 26 2004 - 21:58:41)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 625825 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 625761 Bytes = 611.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #3 So Jan 30
21:40:18 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:31:ea:b7
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit mode
Intel/Sharp Extended Query Table at 0x0031
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Sagem
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/avia_av_core: Starting avia_gt_wdt thread.
misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/at76c651.o
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1993)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.5 2004/08/21 09:05:31 mogway Exp $
Yadi Snapshot vom 30.01.2005 21:25 - Image-Version 2.0.0.8
Networkcfg eth0: 192.168.2.5/255.255.255.0 gw 192.168.2.2
Startmode: Bootmenu - SPTS:on - HWS:on
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 93, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.180 2005/01/13 10:48:02 diemade Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.365 2005/01/30 18:14:13 thegoodguy Exp $
[zapit] PMT update enabled
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $
[controld] Boxtype detected: (3, Sagem D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
[neutrino] initialized everything
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 544x576 (4:3 -> 4:3)
[timeThread] time(): 16.02.2005 14:43:17, tim: Wed Feb 16 14:43:17 2005
PES, queue 0 normal.
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
PES, queue 0 normal.
avia_av_wdt_thread: video decoding stopped ==> restart
[controld] VIDEO_EVENT_SIZE_CHANGED 544x576 (4:3 -> 4:3)
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
PES, queue 0 normal.
PES, queue 0 normal.
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
PES, queue 0 normal.
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_wdt_thread: FIFO_PDCT = 127 ==> risc crashed .. restarting
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
[sectionsd] getUTC: read: Connection timed out
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
PES, queue 0 normal.
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_av: new_audio_config timeout
avia_gt_dmx: queue 31 overflow (count: 1)
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
avia_gt_ucode: framer error
Referenz-Spannungen aus diesem Threat
Code: Alles auswählen
Spannung am LNB-Ausgang: 12,92
Spannung am LNB-Ausgang: 11,42
Pin1-36 der senkrecht stehenden Platine vom Kartenslot aus gesehen.
P BoxOK| BoxUD4
1 3,25 | 0,04
2 5,03 | 5,09
3 0 | 0
4 1,62 | 3,25
5 0 | 0
6 3,24 | 3,32
7 0,01 | 0
8 3,01 | 0,06-0,12 (schwingt)
9 3,01 | 0,05-0,12 (schwingt)
10 5,02 | 4,99
11 1,6 | 0,03-0,06 (schwingt)
12 1,6 | 0,03-0,06 (schwingt)
13 1,6 | 0,03-0,06 (schwingt)
14 1,6 | 0,03-0,06 (schwingt)
15 1,6 | 0,03-0,06 (schwingt)
16 1,6 | 0,03-0,06 (schwingt)
17 1,6 | 0,03-0,06 (schwingt)
18 1,6 | 0,03-0,06 (schwingt)
19 4,75 | 4,69-4,74 (schwingt)
20 0 | 4,55-4,66 (schwingt)
21 0 | 0
22 5,02 | 4,99
23 8,51 | 8,72
24 31,4 | 31,1
25 4,8 | 4,84
26 12,3 | 12,45
27 0 | 0
28 0 | 0
29 16,5 | 16,79
30 5,02 | 4,99
31 0 | 0
32 5,03 | 4,99
33 5.01 | 4,98
34 5,02 | 4.99
35 5.02 | 0
36 24,5 | 24,8
Pin1-10 der kleinen silbernen Tuner an der Tunerplatine von der Gehäuserückseite.
P BoxOK| BoxUD4
1 17,8 | 12,61
2 18,1 | 12,94
3 4,91 | 4,88
4 0,22 | 4,74-4,84 (schwingt)
5 0 | 0
6 0 | 0
7 4,99 | 5,07
8 24,08| 25,8
9 5,03 | 5,07
10 5,03 | 5,07Ansonsten MP3/Movieplayer funktioniert tatelos.
Kann mir bitte jmd. einen Tipp geben wo ich mit der Fehlersuche beginnen soll?
Gruß
tetzlav
ucode00F0. Ohne Diese hat meine Sagem bei HW-Sections "Ein" grundsätzlich gezickt