Und zwar habe ich meine Dbox2(Philips) gerade mit einem snapshot updaten wollen dabei ist er anscheinend abgestürzt; hat plötzlich neu gebootet(konnte nicht direkt sehen ob er fertig war oder ob er neu gestartet hat). Auf jeden Fall startet die Box jetzt bis zu dem Punkt an dem sie einen IP zugewiesen haben will. Kann dann IP, Subnetmask und Gateway bestätigen, jedoch nachdem ich das Gateway mit OK bestätigt habe will sie wieder die IP wissen, es kommt nun also zu einer Art Schleife. Da hab ich mir gedacht ich für einfach mit Hilfe des Bootmanager ein neues komplettes Flash aus. Dazu habe ich die Standard IP 192.168.000.003 benutzt. Nun scheint es aber ein Problem mit BOOTP zu geben. Ausserdem scheint die config Datei dafür nicht zu existieren(lese ich aus dem COM Terminal) Anbei einmal die Ausgabe des Com Terminal beim Versuch zu flashen und einmal bei einem "normalen Start"... Wäre für jegliche Hilfe dankbar
Habe ausserdem die Möglichkeit gefunden über die methode ohne nullmodemkabel von dietmarh seite gelesen, dort gibt es aber anscheinend Probleme mit dem Server so das ich es noch nicht ausprobieren konnte.
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-4a.e1.c4.07.00.00-dd
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 153208
verify sig: 263
Branching to 0x40000
U-Boot 1.1.1 (TuxBox) (Sep 29 2004 - 01:20:48)
CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/200410020053_yadi_squashfs_head_2x.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
_________________________________________________________
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004000c: 0x71ab in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040010: 0x8b6a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040014: 0xbc37 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0xadc6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0x1d9f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0x4b30 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0x61e0 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060000: 0x97e5 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060004: 0x678e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060008: 0x2ccf in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006000c: 0x1de7 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060010: 0xcf3b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060014: 0xaa75 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060018: 0xbcc1 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0006001c: 0x9557 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060020: 0x9f79 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00060024: 0x64ad in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080000: 0xe722 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080004: 0xb0fe in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080008: 0xc8b5 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008000c: 0x5f74 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080010: 0xfb86 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080014: 0xb7cb in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080018: 0xbbb6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0008001c: 0x7063 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080020: 0xc7f3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00080024: 0xf753 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0000: 0x6853 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0004: 0x7f7b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0008: 0x1ff7 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a000c: 0xb27f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0010: 0x7a8b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0014: 0x7ed0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0018: 0xa4a1 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a001c: 0xecf8 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0020: 0xc3a3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000a0024: 0xafc2 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0000: 0x1f84 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0004: 0xbf52 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0008: 0xe59e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c000c: 0x8846 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0010: 0xf331 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0014: 0x443b in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0018: 0x53c0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c001c: 0x8ff6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0020: 0x3097 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000c0024: 0xf0b9 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0000: 0x9acf in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0004: 0x788a in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0008: 0xdc51 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e000c: 0xd76d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0010: 0x7213 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0014: 0xbe46 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0018: 0x450d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e001c: 0x5c54 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0020: 0xa9a0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0xb137 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0xb3a3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0x3d51 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0x8e6e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010000c: 0x6007 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100010: 0xdbb8 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100014: 0xc6ec in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0x326f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0xf943 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0xd8dc in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0x31b5 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0x1e33 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x2ac7 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0xa629 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012000c: 0x736f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0xe9f3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0xe7c6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0x716e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0x1833 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0xe792 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xe498 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0xc781 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0x2491 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0x41a6 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0xfca0 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0x876c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0x787d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0x2624 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0xdec4 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0x2bb7 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0xd2a0 in
stead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0014fd54
You cannot use older JFFS2 filesystems with newer kernels
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
empty_blocks 0, bad_blocks 0, c->nr_blocks 11
mount: Mounting /dev/mtdblock/4 on /var failed: Invalid argument
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Philips
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia60
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tda8044h.o
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
/etc/init.d/rcS: 156: cannot create /etc/issue.net: Directory nonexistent
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
$Id: lcdip.cpp,v 1.3 2004/07/15 21:41:40 mogway Exp $
writing /etc/network/interfaces: No such file or directory
ifup: /etc/network/interfaces: No such file or directory
mkdir: Cannot create directory `/var/tuxbox/': Read-only file system
cd: 190: can't cd to /var/tuxbox/config/neutrino/icons
ln: radiomode.pal: Read-only file system
ln: radiomode.raw: Read-only file system
Starting pid 84, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[ConfigFile] Unable to open file /var/tuxbox/config/lcdmenu.conf for reading.
Segmentation fault
$Id: lcdip.cpp,v 1.3 2004/07/15 21:41:40 mogway Exp $
Starting pid 85, console /dev/console: '/bin/sh'
BusyBox v1.00-pre10 (2004.09.29-05:28+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # help
Built-in commands:
-------------------
. : alias break cd chdir continue eval exec exit export false
hash help local pwd read readonly return set shift times trap
true type ulimit umask unalias unset wait
/ #
Das in Kursiv wird durch drücken von Enter hervorgerufen..
. Das komische ist, dass ich mit der Box über die Konsole kommuniziernen kann.(-->Lauft die Kom. überhaupt über das NT-Kabel oder über RS232?) Vielleicht mach ich ja auch irgendeinen simplen Fehler 
, hab mir aber das Readme des Bootmanagers durchgelesen und den Imageflashassistenten benutzt, wobei mir aufgefallen ist das die Ip welche in dem vom IFA gestarteten Bootmanager mir unbekannt ist.
