Hallo zusammen,
habe schon etwas gelesen, alles ausgemerzt.
Folgendes log :
Empty flash at 0x0001e4b0 ends at 0x0001e4b4
Empty flash at 0x0001e6f0 ends at 0x0001e6f4
Empty flash at 0x0001eba4 ends at 0x0001eba8
Empty flash at 0x0001eca0 ends at 0x0001fe1c
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020000: 0x453d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020004: 0x0020 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020008: 0x0300 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020010: 0x436f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020014: 0x7265 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020018: 0x6564 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002001c: 0x4f4d in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020020: 0x7c69 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00020028: 0x240c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0002002c: 0x1a02 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x3e63 in
..........
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x000e0024: 0x84d6 in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100000: 0xff79 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100004: 0xf7a8 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100008: 0xe729 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010000c: 0x6ce4 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100010: 0x45f4 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100014: 0x7948 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100018: 0xfa00 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0010001c: 0xff25 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100020: 0x079c in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00100024: 0xbe0f in
stead
Further such events for this erase block will not be printed
Old JFFS2 bitmask found at 0x0010aa14
You cannot use older JFFS2 filesystems with newer kernels
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120000: 0xba01 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120004: 0x0e62 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120008: 0x8dcb in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012000c: 0x0cb9 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120010: 0xcb93 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120014: 0x98c4 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120018: 0xe43e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0012001c: 0xf763 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120020: 0x81fa in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00120024: 0xe38a in
stead
Further such events for this erase block will not be printed
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140000: 0x3090 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140004: 0xb13e in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140008: 0xf621 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014000c: 0xf055 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140010: 0xfd66 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140014: 0xf4bf in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140018: 0x74a3 in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0014001c: 0x622f in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140020: 0x15bf in
stead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00140024: 0xd5fb in
stead
Further such events for this erase block will not be printed
Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
empty_blocks 0, bad_blocks 0, c->nr_blocks 11
mount: Mounting /dev/mtdblock/3 on /var failed: Invalid argument
Using /lib/modules/2.4.25-dbox2/misc/event.o
ifup: /etc/network/interfaces: No such file or directory
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.25-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.25-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.25-dbox2/misc/avs.o
Using /lib/modules/2.4.25-dbox2/misc/saa7126.o
Using /lib/modules/2.4.25-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
Using /lib/modules/2.4.25-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.25-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.25-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.25-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.90 2004/03/17 10:44:15 diemade Exp $
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia50
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.44 2003/12/22 05:31:39 obi Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.203 2004/04/07 23:17:45 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.25-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.25 2004/01/30 08:24:42 zwen Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.25-dbox2/misc/ves1820.o
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.25-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.25-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.25-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.199 2004/04/07 23:23:36 carjay Exp $
Beim ersten Start erstmal die Box konfigurieren...
][/color]
Hier gebe ich die Netzwerkdaten ein und dann kommt ::
writing /etc/network/interfaces: No such file or directory
ifup: /etc/network/interfaces: No such file or directory
Kann mir jemand sagen, wie ich das image lösche ? Schätze die Struktur ist falsch.
Vorher funzte die box 2 Jahre lang.
HILFE !
nach jtg update kein zugriff auf d-box per ftp
-
- Neugieriger
- Beiträge: 6
- Registriert: Montag 8. November 2004, 00:26
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Neugieriger
- Beiträge: 6
- Registriert: Montag 8. November 2004, 00:26
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Neugieriger
- Beiträge: 6
- Registriert: Montag 8. November 2004, 00:26
eigentlich nicht,
ich habe nur die normalen sachen am start. zweite netzwerkkarte, die am hub hängt habe ich auch schon ausgeschaltet und die netzwerkkarten gewechselt. SP 2 habe ich gar nicht erst drauf.
komischer weise habe ich ja vor dem flashen noch ganz normal zugriff gehabe auch einfach über den router.
jetzt nur an einer netzwekrkarte dran.
vielleicht nehm ich mal den alten bootmanager ?
die box ist ja im debug, sonst würde ich die ja nicht anhalten können.
Du meintest ja gemeinsame nutzung in den netzwekeinstellungen, oder ?
Danke schon mal, ich glaube ich werde mal an einem neutralen rechner anschließen, der nichts drauf hat.
ich habe nur die normalen sachen am start. zweite netzwerkkarte, die am hub hängt habe ich auch schon ausgeschaltet und die netzwerkkarten gewechselt. SP 2 habe ich gar nicht erst drauf.
komischer weise habe ich ja vor dem flashen noch ganz normal zugriff gehabe auch einfach über den router.
jetzt nur an einer netzwekrkarte dran.
vielleicht nehm ich mal den alten bootmanager ?
die box ist ja im debug, sonst würde ich die ja nicht anhalten können.
Du meintest ja gemeinsame nutzung in den netzwekeinstellungen, oder ?
Danke schon mal, ich glaube ich werde mal an einem neutralen rechner anschließen, der nichts drauf hat.
-
- Neugieriger
- Beiträge: 6
- Registriert: Montag 8. November 2004, 00:26
Hallo Nachtvogel:
ich habe gegoogelt:
http://forum.tuxbox-cvs.sourceforge.net ... ight=11004
das wird es wohl sein, hofe ich,
fuck trojaner !
Danke !
ich habe gegoogelt:
http://forum.tuxbox-cvs.sourceforge.net ... ight=11004
das wird es wohl sein, hofe ich,
fuck trojaner !
Danke !
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Neugieriger
- Beiträge: 6
- Registriert: Montag 8. November 2004, 00:26
-
- Tuxboxer
- Beiträge: 4391
- Registriert: Freitag 21. Mai 2004, 17:16
-
- Neugieriger
- Beiträge: 6
- Registriert: Montag 8. November 2004, 00:26