bekomme kein image auf die box

Wie blitze ich ein Bild - Permanent Outgoing Incomes
harbad
Erleuchteter
Erleuchteter
Beiträge: 825
Registriert: Dienstag 13. August 2002, 22:40

bekomme kein image auf die box

Beitrag von harbad »

hallo,

sagem 1*I, kabel
ich kann hier machen was ich will, ich bekomme kein image auf die box. egal ob mit oder ohne nullmodemkabel. im display steht flashing und das bleibt auch nach einer 3/4 stunde so. hier mal das log:

BOOTP broadcast 1
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-1f.a6.b8.07.00.00-1a
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata 0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.6.3, My IP 192.168.6.100
debug: Sending TFTP-request for file C/dbox2/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3b-bd-19
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial

Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.6.3; our IP address is 192.168.6.100
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done
lo: 0x100000unprotecting 1
[0]-> [0] [Sb000b0] unprotecting 2
[0]-> [0] [Sb000b0] unprotecting 3
[0]-> [0] [Sb000b0] unprotecting 4
[0]-> [0] [Sb000b0] unprotecting 5
[0]-> [0] [Sb000b0] unprotecting 6
[0]-> [0] [Sb000b0] unprotecting 7
[0]-> [0] [Sb000b0] unprotecting 8
[0]-> [0] [Sb000b0] unprotecting 9
[0]-> [0] [Sb000b0] unprotecting a
[0]-> [0] [Sb000b0] unprotecting b
[0]-> [0] [Sb000b0] unprotecting c
[0]-> [0] [Sb000b0] unprotecting d
[0]-> [0] [Sb000b0] unprotecting e
[0]-> [0] [Sb000b0] unprotecting f
[0]-> [0] [Sb000b0] unprotecting 10
[0]-> [0] [Sb000b0] unprotecting 11
[0]-> [0] [Sb000b0] unprotecting 12
[0]-> [0] [Sb000b0] unprotecting 13
[0]-> [0] [Sb000b0] unprotecting 14
[0]-> [0] [Sb000b0] unprotecting 15
[0]-> [0] [Sb000b0] unprotecting 16
[0]-> [0] [Sb000b0] unprotecting 17
[0]-> [0] [Sb000b0] unprotecting 18
[0]-> [0] [Sb000b0] unprotecting 19
[0]-> [0] [Sb000b0] unprotecting 1a
[0]-> [0] [Sb000b0] unprotecting 1b
[0]-> [0] [Sb000b0] unprotecting 1c
[0]-> [0] [Sb000b0] unprotecting 1d
[0]-> [0] [Sb000b0] unprotecting 1e
[0]-> [0] [Sb000b0] unprotecting 1f
[0]-> [0] [Sb000b0] unprotecting 20
[0]-> [0] [Sb000b0] unprotecting 21
[0]-> [0] [Sb000b0] unprotecting 22
[0]-> [0] [Sb000b0] unprotecting 23
[0]-> [0] [Sb000b0] unprotecting 24
[0]-> [0] [Sb000b0] unprotecting 25
[0]-> [0] [Sb000b0] unprotecting 26
[0]-> [0] [Sb000b0] unprotecting 27
[0]-> [0] [Sb000b0] unprotecting 28
[0]-> [0] [Sb000b0] unprotecting 29
[0]-> [0] [Sb000b0] unprotecting 2a
[0]-> [0] [Sb000b0] unprotecting 2b
[0]-> [0] [Sb000b0] unprotecting 2c
[0]-> [0] [Sb000b0] unprotecting 2d
[0]-> [0] [Sb000b0] unprotecting 2e
[0]-> [0] [Sb000b0] unprotecting 2f
[0]-> [0] [Sb000b0] unprotecting 30
[0]-> [0] [Sb000b0] unprotecting 31
[0]-> [0] [Sb000b0] unprotecting 32
[0]-> [0] [Sb000b0] unprotecting 33
[0]-> [0] [Sb000b0] unprotecting 34
[0]-> [0] [Sb000b0] unprotecting 35
[0]-> [0] [Sb000b0] unprotecting 36
[0]-> [0] [Sb000b0] unprotecting 37
[0]-> [0] [Sb000b0] unprotecting 38
[0]-> [0] [Sb000b0] unprotecting 39
[0]-> [0] [Sb000b0] unprotecting 3a
[0]-> [0] [Sb000b0] unprotecting 3b
[0]-> [0] [Sb000b0] unprotecting 3c
[0]-> [0] [Sb000b0] unprotecting 3d
[0]-> [0] [Sb000b0] unprotecting 3e
[0]-> [0] [Sb000b0] unprotecting 3f
[0]-> [0] [Sb000b0] Un-Protected 63 sectors
Erase Flash from 0x10020000 to 0x107fffff
sector 63 .... done
Erased 63 sectors
Copy to Flash...

was nun sprch zeus?

harbad
philips sat avia 600
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Flash mal per "Image flashen" des Bootmanagers, die ppcboot_writeflash zeit evtl. mehr an.
There are 10 types of people in the world: those who know binary and those who don't
harbad
Erleuchteter
Erleuchteter
Beiträge: 825
Registriert: Dienstag 13. August 2002, 22:40

Beitrag von harbad »

hab ich auch probiert, gleiches ergebnis. ich hab es dann beim letzten mal nach einer stunde abgebrochen, box gestartet, dann kam ip eingeben usw.. box ist normal hochgefahren. dann hab ich das image über die expertenfunktionen geflasht. hat keine fünf minuten gedauert bis das image drauf war. jetzt sollte sie normal laufen (hab kein kabel).
philips sat avia 600