Ich habe meine dBox2 (Nokia) vor fast 2 Jahren selbst "umgebaut" und
hatte bisher nie Probleme beim Flashen. Heute wollte ich eine aktuelle
Neutrino über das Menü flashen und habe wie üblich das neue Image
per FTP ins TMP kopiert und ausgewählt. Flash wurde wie üblich gelöscht,
aber als es dann ans Schreiben ging ist die Box scheinbar abgeschmiert.
Nachdem 30 Min. nichts passierte, habe ich den Stecker gezogen. Die
dBox2 bleibt seit dem bei "loading kernel" hängen. Dann habe ich
den dBox-BootManager benutzt um das neue image einzuspielen...
Lief auch alles wie gewohnt, aber dann wird das Flashen mit der oben
genannten Fehlermeldung beendet...
FlashROM zerschossen? Was kann ich noch tun?
Vielen Dank im vorraus...
Hier der Log:
Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP redebug: Got Block #0200debug: Got Block #0250debug: Got Block #0300debug: Got Block #0350will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (ng...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: xx-xx-xx-xx-xx-xx (Nummer entfernt)
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.3; our IP address is 192.168.0.202
Filename 'C/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.3; our IP address is 192.168.0.202
Filename 'C/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected
dbox2-ppcboot> bootp 120000 /tftpboot/flash.img
BOOTP broadcast 1
TFTP from server 192.168.0.3; our IP address is 192.168.0.202
Filename ##################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
done
dbox2-ppcboot> protect off 10020000 107FFFFF
Error: start and/or end address not on sector boundary
dbox2-ppcboot>
MfG,
Dr.InSide