ich bekomme linux nicht mehr drauf
ich wollte yadi draufspielen und ist auch drauf (soweit bis ich die code eingeben muss)
nun will ich linux wieder haben aber bekomme immer beim flashen
folgendes:
boot netdebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-aa.eb.88.07.00.00-bb
debug: HWrev 01 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.100, My IP 192.168.0.100
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug:
TFTP failed, giving up...
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 152952
verify sig: 263
Branching to 0x40000
U-Boot 1.1.1 (TuxBox) (May 28 2004 - 13:03:11)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.1
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/alex.W/AlexW-v.1.6.9_2xI_Sat.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
und immer so weiter
was hat das zu bedeuten?
benutze boot manager
gruss Thorsten
