update von AlexW auf yadi und Premiere bleibt schwarz

[pottyishere]

Hallo Leute,
nun habe ich X mal die bestehenden Beiträge zu diesem Thema gelesen und komme nicht weiter.

Nokia 2
camd2 md5: b706c6869d63f6af912e5284292d087d -> nix
camd2 md5: 5989a5cc2462899a10c267b4d9e85ff8 --> auch nix

avia500v110
avia600vb022
ucode_b107
cam_01_02_105E
-rwxr-xr-x 1 root root 11668 Sep 13 23:21 camd2


Probiert habe ich es mit dem aktuellen Snapshot und dem letzten release.

mit dem letzten snapshot vom AlexW Image lief alles noch ?!
Hat jemand eine Idee ?



cat /proc/kmsg
<4>Linux version 2.4.25-dbox2 (mogway@yadi.org) (gcc version 3.3.3) #8 Mo Mai 31 00:06:01 CEST 2004
<4>On node 0 totalpages: 8192
<4>zone(0): 8192 pages.
<4>zone(1): 0 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs
<4>Decrementer Frequency = 252000000/60
<5>m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
<5>m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 66.76 BogoMIPS
<6>Memory: 30908k available (1032k kernel code, 368k data, 60k init, 0k highmem)
<6>Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
<6>Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<6>Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
<4>Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
<4>POSIX conformance testing by UNIFIX
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
<6>devfs: boot_options: 0x1
<6>JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
<6>i2c-core.o: i2c core module version 2.6.1 (20010830)
<6>i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
<7>i2c-core.o: driver i2c-dev dummy driver registered.
<6>CPM UART driver version 0.04
<6>ttyS0 at 0x0280 is on SMC1 using BRG1
<6>ttyS1 at 0x0380 is on SMC2 using BRG2
<4>pty: 256 Unix98 ptys configured
<6>eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1a:15:ed
<5>D-Box 2 flash driver (size->0x800000 mem->0x10000000)
<6>D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
<4> Intel/Sharp Extended Query Table at 0x0035
<5>cfi_cmdset_0001: Erase suspend on write enabled
<7>0: offset=0x0,size=0x4000,blocks=8
<7>1: offset=0x20000,size=0x20000,blocks=63
<6>Using word write method
<5>Creating 7 MTD partitions on "D-Box 2 flash memory":
<5>0x00000000-0x00020000 : "BR bootloader"
<5>0x00020000-0x00040000 : "flfs (u-boot)"
<5>0x00040000-0x000e0000 : "kernel (jffs2)"
<5>0x000e0000-0x006a0000 : "root (squashfs)"
<5>0x006a0000-0x00800000 : "var (jffs2)"
<5>0x00020000-0x00800000 : "flash without bootloader"
<5>0x00000000-0x00800000 : "complete flash"
<6>Linux video capture interface: v1.00
<6>mice: PS/2 mouse device common for all mice
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 512 buckets, 4Kbytes
<6>TCP: Hash tables configured (established 2048 bind 4096)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<4>VFS: Mounted root (squashfs filesystem) readonly.
<6>Mounted devfs on /dev
<6>Freeing unused kernel memory: 60k init
<6>event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
<6>[i2c-8xx]: mpc 8xx i2c init
<7>i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
<7>i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
<6>[i2c-8xx]: adapter: 0
<7>i2c-core.o: driver DBox2 Frontprocessor driver registered.
<7>i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC 8xx I2C adapter](pos. 0).
<7>i2c-core.o: driver i2c audio/video switch driver registered.
<7>i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos. 1).
<7>i2c-core.o: driver saa7126 registered.
<7>i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos. 2).
<6>$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
<7>i2c-core.o: driver DBox2-CAM registered.
<7>i2c-core.o: client [DBox2-CAM] registered to adapter [PowerPC 8xx I2C adapter](pos. 3).
<6>$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
<4>DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
<7>i2c-core.o: driver DVB I2C bridge registered.
<7>i2c-core.o: client [DVB I2C bridge] registered to adapter [PowerPC 8xx I2C adapter](pos. 4).
<6>dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
<6>$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
<6>avia_av: $Id: avia_av_core.c,v 1.91 2004/05/17 17:40:31 derget Exp $
<6>avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
<4>avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
<6>avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
<6>avia_gt_core: autodetecting chip type... GTX
<6>avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.204 2004/05/19 20:15:00 derget Exp $
<5>avia_gt_core: masking unhandled irq reg 1 bit 11
<5>avia_gt_core: masking unhandled irq reg 1 bit 13
<6>avia_gt_ucode: loaded ucode vB107
<6>avia_gt_ucode: ucode section filters disabled.
<4>avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
<6>avia_gt_gv: $Id: avia_gt_gv.c,v 1.38 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<6>avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
<5>avia_gt_core: Loaded AViA eNX/GTX driver
<6>avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<4>Console: switching to colour frame buffer device 82x32
<6>avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
<4>lcd.o: init lcd driver module
<4>lcd.o: found KS0713/SED153X lcd interface
<6>avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
<6>avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
<5>avia_gt_core: masking unhandled irq reg 0 bit 6
<6>avia_oss: $Id: avia_gt_oss.c,v 1.25 2004/01/30 08:24:42 zwen Exp $
<4>avia_gt_pcm_set_rate(44100)
<4>avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
<4>DVB: registering frontend 0:0 (VES1893)...
<6>avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
<6>avia_gt_napi: $Id: avia_gt_napi.c,v 1.200 2004/05/19 20:15:00 derget Exp $
<5>avia_gt_core: masking unhandled irq reg 0 bit 7
<6>avia_gt_gv: set_input_mode (mode=2)
<6>avia_gt_gv: set_input_size (width=720, height=576)
<7>freq=1638000000 ratio=125000 div=3330 pe=0
<6>PES, queue 0 normal.

[pottyishere]

Sorry fürs posten.
Die kopierten ucodes waren defekt Zeitspempel von 1969