Dbox2 Nokia Sat findet keine Sender

[asse]

Hallo,

ich habe hier eine dbox2 Sat von Nokia die keine Sender
findet.
Ucodes und cam alpha müssten in Ordnung sein.
Ich vermute das es ein Hardware defekt ist.

Hier mal ein Ausschnitt des Bootlogs wo ich den Fehler vermute:

Kann mir vielleicht jemand was dazu sagen ?


CAM: attached to adapter PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.22-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.16 2003/07/24 01:59:22 homar Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.22-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.79 2003/10/16 08:42:20 alexw Exp $
avia_av: microcode verify: 24435 errors.
avia_av: imem verify: 256 errors
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38CC120 XER: 20000000 LR: C38CC110 SP: C1C63E00 REGS: c1c63d50 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1c62000[53] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000000 C1C63E00 C1C62000 00000001 00000039 00900000 C1F3B000 C016F0B8
GPR08: C01D5000 00000060 C38D0000 C38D3000 0000000D 1005E524 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 C1C63E98 10074FE8 C1BC2000
GPR24: C01D5D40 C0120000 C38D1000 00900000 00000039 00000080 C38CFCA0 C38D0000
Call backtrace:
C38D0000 C38CD7BC C38CE52C C0010E84 C00025DC 10014590 10015718
10003BC8 100037E4 0FEFD7E0 00000000
EXIT
Using /lib/modules/2.4.22-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.43 2003/10/08 19:54:24 obi Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.189 2003/10/25 15:45:34 wjoost Exp $
avia_gt_dmx: loaded ucode vB107
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.37 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.28 2003/09/30 05:45:35 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.51 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.22-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
cdkVcInfo $Id: cdkVcInfo.c,v 1.4 2003/11/03 09:15:39 alexw Exp $

Using /lib/modules/2.4.22-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.23 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/ves1820.o
Using /lib/modules/2.4.22-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.22-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.25 2003/09/12 03:01:51 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.188 2003/09/30 05:45:35 obi Exp $
$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
$Id: zapit.cpp,v 1.332 2003/10/14 12:48:59 thegoodguy Exp $
/var/tuxbox/config/zapit/bouquets.xml: No such file or directory
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38CC08C XER: 20000000 LR: C38CC07C SP: C195BE00 REGS: c195bd50 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c195a000[84] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C195BE00 C195A000 00000001 000000E0 20006F06 00000000 C3B5F908
GPR08: 00000000 C38D3000 C38D0000 C0004840 84000044 10034024 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 0195BF40 C3B5F908 C1828580
GPR24: C195D410 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003D088 C3B5FB54 C388722C C3882380 C0041D98 C00025DC 00000005
100131C4 1001329C 10010A50 10010FD0 0FCE47E0 00000000
[camd] CA_SEND_MSG: Remote I/O error
[camd] CA_SEND_MSG: Remote I/O error
$Id: controld.cpp,v 1.110 2003/10/21 22:48:25 zwen Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38CC08C XER: 00000000 LR: C38CC07C SP: C1761DD0 REGS: c1761d20 TRAP: 0200
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1760000[89] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C1761DD0 C1760000 00000001 000003B0 C1761E2C C1761E48 C3B5F430
GPR08: 00000000 C38D3000 C38D0000 C0004840 84000048 1001F074 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01761F40 C3B5F430 C17390B0
GPR24: C1952D30 00000002 00000000 C1761E2C 000003B0 00000000 7FFFFD90 C1761E48
Call backtrace:
C002A9F4 C38CE4D4 C3B5F774 C388722C C3882380 C0041D98 C00025DC
30023388 10004D88 10005318 10004368 0FCDA7E0 00000000
[nhttpd] Neutrino HTTP-Server starting..
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[cdkVcInfo] Version (Image): 0107200311041222
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused

[doc]

avia_av: microcode verify: 24435 errors.
avia_av: imem verify: 256 errors
Machine check in kernel mode.

Irgend etwas stimmt beim Avia nicht!
Würde so jetzt mal auf den RAM tippen!?