nachdem ich ich durch langes Stöbern hier im Forum mein Flash endlich
auslesen konnte, möchte ich nun die ".did" herstellen lassen.
Leider komme ich nicht weiter - anbei das bootlog :
1debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-3f.80.2d.07.00.00-a8
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.100.1, My IP 192.168.100.3
debug: Sending TFTP-request for file C/dbox2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 224356
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jan 10 2002 - 16:35:20)
Initializing...
CPU: PPC823ZTnnA at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1b-d4-43
FLASH: 8 MB
LCD driver (KS0713) initialized
No LCD Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.100.1; our IP address is 192.168.100.3
Filename 'C/dbox2/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1FD2864 bytes)
No FB Logo in Flash , trying tftp
BOOTP broadcast 1
TFTP from server 192.168.100.1; our IP address is 192.168.100.3
Filename 'C/dbox2/tftpboot/logo-fb'.
Load address: 0x120000
Loading: ###
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
Images:
1: cdk
2: yadd
3: debian
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.100.1; our IP address is 192.168.100.3
Filename 'C/dbox2/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
###############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 600241 Bytes = 586 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@noer-lab.noernet.de) (gcc version 3.0.1 20010702 (prer
elease)) #89 Fri Aug 24 21:37:54 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.100.1:C/dbox2/cdk
root/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.100.1:C/dbox
2/cdkroot/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30624k available (1088k kernel code, 424k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20264kB/6754kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:1b:d4:43
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x000c0000 : "idxfs"
0x000c0000-0x001c0000 : "var"
0x001c0000-0x00760000 : "root"
0x00760000-0x00800000 : "flfs"
0x00020000-0x00800000 : "GesamteFlashOhneBL"
0x007e0000-0x00800000 : "flfs_128"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.100.1, my address is 192.168.100.3
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.100.1
portmap: server 192.168.100.1 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/2 on 192.168.100.1
portmap: server 192.168.100.1 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.100.1 not responding, timed out
Root-NFS: Server returned error -5 while mounting C/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000B57F LR: 00001032 SP: C022FDF0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C022FDF0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C022FD60 00000002 00031B58 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 01FDD51C 01F9FFC0 01FA0038 000000F8
GPR24: C02F3150 00100040 00800000 FFFFFFEA C0170000 FFFFFFFF C0150000 00000000
Call backtrace:
C000B57F C0008FF0 C000EE74 C0141C0C C013E814 C00022AC C0004CAC
Kernel panic: Attempted to kill init!
Rebooting in 180 seconds..Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: 00002274 XER: C000B57F LR: 00001032 SP: C1F9FEC0 REGS: c1f9ffd0 TRAP: 1000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c022e000[1] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: C0008FF0 C1F9FEC0 C022E000 00000000 00001032 00001002 00002274 00000000
GPR08: 0000001A C0009CF0 C0277060 C1F9FE30 00000002 00031B58 01FE3400 00000000
GPR16: FFFFFFFF 00000000 007FFF00 007FFEC0 00001032 01F9FFC0 01FA0038 000000F8
GPR24: C0002DF8 00100040 00800000 FFFFFFEA 00000008 FFFFFFFF C022E000 C1F9FFD0
Call backtrace:
C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0
C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C C0002E7C
C0002718 C000F548 C00054F0 C000291C C0002E7C C0002718 C000F548
C00054F0 C000291C C0002E7C C0002718 C000F548 C00054F0 C000291C
C0002E7C C0002718 C000F548 C00054F0 C000291C
Kernel panic: Attempted to kill init!
Besonders diese Passage macht mir zu schaffen :
portmap: server 192.168.100.1 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
mount: server 192.168.100.1 not responding, timed out
Root-NFS: Server returned error -5 while mounting C/dbox2/cdkroot/
VFS: Unable to mount root fs via NFS, trying floppy.
request_module[block-major-2]: Root fs not mounted
VFS: Cannot open root device "nfs" or 02:00
Vielen Dank schonmal vorab.
