ich habe gerade mal versucht, den Release-Zweig zu compilieren und Enigma zum laufen zu bringen, die Box steigt jedoch beim Start von Enigma mit einer Fehlermeldung aus. Das Compilieren des Head-Zweiges (mit Neutrino) funktioniert übrigens prima. Hier mal der Boot-Log des Release-Zweiges:
Code: Alles auswählen
odebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.3 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-23.02.4b.08.00.00-00
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 143344
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Sep 18 2003 - 22:11:24)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ....... done.
find_inode failed for name=ppcboot.conf
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: console on ttyS0
2: console on fb0
3: console on null
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 718165 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 718101 Bytes = 701.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (alex@Linux) (gcc version 3.2.2) #1 Fri Sep 19 21:30:
36 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30644k available (1244k kernel code, 404k data, 76k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:3e:4f:98
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
cramfs: wrong magic
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 76k init
init started: BusyBox v0.60.4 (2003.09.19-19:28+0000) multi-callSIOCADDRT: Netw
ork is unreachable
Using /lib/modules/2.4.20-dbox2/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20-dbox2/misc/info.o
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 03
feID: 00
fpID: 52
enxID: 03
gtxID: ffffffff
hwREV: 41
fpREV: 23
DEMOD: AT76C651
Using /lib/modules/2.4.20-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.20-dbox2/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2126] registered to adapter [](pos. 1).
insmod: input: no module by that name found
insmod: keybdev: no module by that name found
insmod: mousedev: no module by that name found
insmod: joydev: no module by that name found
insmod: evdev: no module by that name found
Using /lib/modules/2.4.20-dbox2/misc/dvb_frontend.o
Using /lib/modules/2.4.20-dbox2/misc/dvb_filter.o
Using /lib/modules/2.4.20-dbox2/misc/dmxdev.o
Using /lib/modules/2.4.20-dbox2/misc/dvb_demux.o
Using /lib/modules/2.4.20-dbox2/misc/fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.36.2.1 2002/11/17 01:59:13 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/dvbdev.o
avia_av_event: $Id: avia_av_event.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt.o
avia_av_proc: $Id: avia_av_proc.c,v 1.2 2002/10/03 12:47:57 Jolt Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.23 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.8 2002/10/13 21:16:15 Jolt Exp $
write 1 event's ...
write 1 event's ...
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.139.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_dmx: Unable to load firmware file '/var/tuxbox/ucodes/ucode.bin'
avia_gt_dmx: No valid firmware found! TV mode disabled.
ENX-INITed -> 0
there MIGHT be no TS :(
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.25.2.2 2003/04/10 14:53:43 zwen Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.19 2002/10/03 11:12:42 thegoodguy Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.22 2002/08/22 13:39:33 Jolt Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.28 2002/08/22 13:39:33 Jolt Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.19 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.17 2002/10/05 15:01:12 Jolt Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.12 2002/10/03 13:32:36 alexw Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_dvr.o
avia_gt_dvr: $Id: avia_gt_dvr.c,v 1.9 2002/10/03 12:47:57 Jolt Exp $
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.38.2.4 2003/03/19 19:43:12 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.20-dbox2/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20-dbox2/misc/dvb.o
dvb.c: init_dvb
Using /lib/modules/2.4.20-dbox2/misc/at76c651.o
$Id: at76c651.c,v 1.31 2002/09/09 18:45:53 obi Exp $
i2c-core.o: driver AT76C651 DVB-C Demodulator registered.
i2c-core.o: client [AT76C651] registered to adapter [](pos. 4).
i2c-core.o: driver DAT7021 driver registered.
i2c-core.o: client [DAT7021] registered to adapter [](pos. 5).
Using /lib/modules/2.4.20-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.141.2.1 2002/11/17 01:59:13 obi Exp $
avia_gt_napi: hardware section filtering disabled.
Using /lib/modules/2.4.20-dbox2/misc/dvb_net.o
dvb_net: $Id: dvb_net.c,v 1.6 2002/08/12 18:24:05 obi Exp $
Using /lib/modules/2.4.20-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 3
Please press Enter to activate this console. [LCD-FONT] initializing core...
[LCD-FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCD-FONT] Intializing font cache...
[LCD-FONT] FTC_Face_Requester (Micron/Regular)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
/bin/enigma: relocation error: /lib/libpng12.so.0: undefined symbol: inflateInit
_