Ich kann keine Image mehr Flashen !!!!

Wie blitze ich ein Bild - Permanent Outgoing Incomes
hockmock
Interessierter
Interessierter
Beiträge: 45
Registriert: Donnerstag 23. Mai 2002, 17:00

Ich kann keine Image mehr Flashen !!!!

Beitrag von hockmock »

Kann mir bitte einer helfen !



log:debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-03.25.0a.08.00.00-70
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.100.35, My IP 192.168.100.10
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-3c-f7-ef
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.100.35; our IP address is 192.168.100.10
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.100.35; our IP address is 192.168.100.10
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 100000 /C/13.img
BOOTP broadcast 1
TFTP from server 192.168.100.35; our IP address is 192.168.100.10
Filename '/C/13.img'.
Load address: 0x100000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 63 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
Flashed 1MBFailure after flash
Timeout writing to Flash

dbox2-ppcboot>
hockmock
Interessierter
Interessierter
Beiträge: 45
Registriert: Donnerstag 23. Mai 2002, 17:00

Beitrag von hockmock »

Hier ist noch der Boot Vorgang :debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-03.25.0a.08.00.00-70
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/sagem-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/sagem-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/sagem-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: No bootrecord
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

An Vpen (PIN 15) wird die Spannung fehlen.

Leiterbahnen/Lötaugen mal überprüfen.

Evtl. hat's auch den GAL (der kleine Chip unterhalb vom Flash) gerissen, ist aber eherunwahrscheinlich.
There are 10 types of people in the world: those who know binary and those who don't
hockmock
Interessierter
Interessierter
Beiträge: 45
Registriert: Donnerstag 23. Mai 2002, 17:00

Beitrag von hockmock »

Ich hab mal gekugt ist nichts von löt spuren zu sehen !
Kann ich vielleich spannung auf pin 15 geben ?
Wenn ich die box einschalte steht auf display kein system !
Musss man vielleicht die flash chip neu beschreiben ?
Ich mal in boad nach gekugt und es soll eine ppcboot.txt extra
für sagem geben und damit soll es laufen !
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Liegt denn Spannung an und wenn ja, wieviel?
There are 10 types of people in the world: those who know binary and those who don't