Hab es jetzt mal mit ppc-boot versucht. Dann kommt folgendes:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-f8.77.8a.07.00.00-6a
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:19:22)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.
find_inode failed for name=tuxbox
load: Failed to find inode
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: .
.
find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash
Scanning JFFS2 FS: .
.
find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 640967 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 640903 Bytes = 625.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.21-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Son Jul 6 12:22:55 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30804k available (1128k kernel code, 376k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:39:aa:6f
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
CFI: Found no D-Box 2 flash memory device at location zero
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Update altes Baseimage..
.
#####################################################
# #
# ZU ALTES BASEIMAGE, BITTE V1.6 INSTALLIEREN!! #
# #
#####################################################
Update auf Baseimage V1.6.2...
Starting pid 28, console /dev/c.: Can't open /proc/bus/dbox.sh
rm: cannot remove `/var/tuxbox/config/lcdmenu.conf': No such file or directory
rm: cannot remove `/var/tuxbox/start_neutrino': No such file or directory
cp: unable to open `/var/tuxbox/config/lcdmenu.conf': No such file or directory
open: No such file or directory
open: No such file or directory
touch: /var/etc/.v1.6.2: No such file or directory
touch: /var/etc/.v1.6.3: No such file or directory
rm: cannot remove `/var/tuxbox/start_neutrino': No such file or directory
rm: cannot remove `/var/tuxbox/start_enigma': No such file or directory
rm: cannot remove `/var/tuxbox/start_lcars': No such file or directory
ln: /var/tuxbox/start_neutrino: No such file or directory
Unmounting 'ramfs' on '/tmp'
ln: /var/tuxbox/start_enigma: No such file or directory
ln: /var/tuxbox/start_lcars: No such file or directory
touch: /var/etc/.v1.6.4: No such file or directory
rm: cannot remove `/var/tuxbox/config/cables.xml': No such file or directory
rm: cannot remove `/var/tuxbox/config/satellites.xml': No such file or directory
mkdir: Cannot create directory `/var/tuxbox/config/tuxnews': No such file or dir
ectory
Unmounting 'jffs2' on '/var'
cp: unable to open `/var/tuxbox/config/tuxnews': No such file or directory
touch: /var/etc/.v1.6.5: No such file or directory
rm: cannot remove `/var/tuxbox/start_neutrino': No such file or directory
rm: cannot remove `/var/tuxbox/start_enigma': No such file or directory
rm: cannot remove `/var/tuxbox/start_lcars': No such file or directory
ln: /var/tuxbox/start_neutrino: No such file or directory
ln: /var/tuxbox/start_enigma: No such file or directory
ln: /var/tuxbox/start_lcars: No such file or directory
touch: /var/etc/.v1.6.6: No such file or directory
ln: /var/tmp: Read-only file system
touch: /var/etc/.v1.6.7: No such file or directory
touch: /var/etc/.v1.6.8: No such file or directory
mkdir: Cannot create directory `/var/etc/network': No such file or directory
mkdir: Cannot create directory `/var/tuxbox/config/tuxmail'Ready to shutdown sys
tem...
The system is halted. Press Reset or turn off powerSystem halt
Irgendwas kann doch da nicht stimmen.
Wie ihr seht, findet er die ganzen Directories nicht.
