habe nun mal den Bootlog angefügt, ich glaube die Box (Kabel 2Xi GTX, Avia 500) hat nen Schuß,
kann mir jeman einen Tipgeben was defekt sein könnte.
Es ist ein AlexwBasis Image drauf. Einen Wärmefehler schein sie auch zu haben, da die Box nach 3-4 min. ohne Strom korrekt hochfährt.
Vielen Dank für eine ANtwort.
Gruß
kbert
Fehler Bootlog:
PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)7.79 BogoMIPS
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache or directo
debug:
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***: No such device or
Watchdog enabled
debug: Transmittin
Board: DBOX2, Nokiabroadcast
I2C: ready
DRAM: 32 MB[lcdd] time-s
FLASH: 8 MB -> usin
Scanning JFFS2 FS: .
. debug: Given up BOOTP/
LCD: ready
FB: loading
[lcd
boot
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPSader (v1.5)
[l
Flash superblock not o
debug: Memory tests (0x400000 -- 0x2000000)led
debug: NumberTest: debug: passed (v1.5)
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> reset
dbox2:root> debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
Board_EventWait: timed out
debug: WARNING: unsupported FP ID 0x0
Board_EventWait: timed out
debug: write to 0x22/0x05 failed, rc -5
Board_EventWait: timed out
Board_EventWait: timed out
debug: unknown demodulatordebug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 00 gtxID 0b
debug: fpID 00 dsID 01-e0.3a.1b.07.00.00-fb
debug: HWrev X5 SWrev 0.4
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
normales Starten:
will verify ELF image, start= 0x800000, size= 203620Mar 13 2003 - 12:11:32)
verify sig: 262
CPU: PPC8
Branching to 0x40000: 2 kB I-Cache 1 kB
PPCBoot 1.1.6 (TuxBox) (Mar 13 2003 - 12:11:32)
*** Warning: CPU Core
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
I2C: ready
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
