Image Alex 1.63 Flash fehler

Wie blitze ich ein Bild - Permanent Outgoing Incomes
wuddel
Beiträge: 2
Registriert: Samstag 22. März 2003, 02:18

Image Alex 1.63 Flash fehler

Beitrag von wuddel »

Hallo Leute meine DBOX 2 von Sagem mit zwei Flash Bausteinen mach beim draufspielen des Alex Image folgende Fehlermeldung weis nicht mehr weiter.
Es ist bereits eine linux 1,5 Version drauf.
Die Box geht aber noch Gott sei Dank.
Danke Wuddel


Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0208

will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000


ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-30-c3-d0
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x8D2E3 (0x1E00 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x84A7E (0x883D bytes)
Input: serial
Output: serial


1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/humi/d-box2/Image/alexW2xBaseimageV1.6.3.img
BOOTP broadcast 1
TFTP from server 192.168.123.251; our IP address is 192.168.123.250
Filename '/C/humi/d-box2/Image/alexW2xBaseimageV1.6.3.img'.
Load address: 0x120000
Loading: #######################################################################
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
######################
done
lo: 0x120000
dbox2-ppcboot> protect off 10020000 107fffff
unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 ...erase failed: a800a8
done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... Flash not Erased

dbox2-ppcboot> debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-6e.c2.58.07.00.00-f2
debug: HWrev 01 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/sagem-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/sagem-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
File /root/platform/mpc8xx-dbox2/kernel/os not found: No such file or directory
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/kernel/os in Flash-FS
debug: Got Block #0208

will verify ELF image, start= 0x800000, size= 208073
verify sig: 262
Branching to 0x40000


ppcboot 0.6.4 (Jul 10 2001 - 11:31:30)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-30-c3-d0
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: 0x8D2E3 (0x1E00 bytes)
FB driver (AVIA-ENX) initialized
FB logo at: 0x84A7E (0x883D bytes)
Input: serial
Output: serial


1: Console on fb
2: Console on ttyS0
Select (1-4), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/humi/d-box2/Image/alexW2xBaseimageV1.6.3.img
BOOTP broadcast 1
TFTP from server 192.168.123.251; our IP address is 192.168.123.250
Filename '/C/humi/d-box2/Image/alexW2xBaseimageV1.6.3.img'.
Load address: 0x120000
Loading: #######################################################################
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
######################
done
lo: 0x120000
dbox2-ppcboot> protect off 10020000 107fffff
unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 ...erase failed: a800a8
done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... Flash not Erased

dbox2-ppcboot
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

benutz mal die Suchfunktion zu a800a8
da gibts haufenweise input
ansonsten: hast Du bevor das nicht mehr ging irgendwas an der Box gebastelt?
never change a running system