hier das lo was zu beiden yads passt weils identisch ist einzigste underschied ist das es einmal das head und einmal das rel_1_0_0 ist aber ich weiss nciht mehr weiter irgendwo ist da ein fehler vieleicht könnt ihr mir heir helfen im chat hat man mir leider nciht helfen können.
Code: Alles auswählen
4: tiab
5: flash
Select image (1-5), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.0.43; our IP address is 192.168.0.3
Filename 'C/yadd/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: #######################################################################
#######################################################################
done
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 722673 Bytes = 705 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20-dbox2 (kami@linux) (gcc version 3.2.2) #1 Mon Mr 24 22:27:4
1 UTC 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.0.43:C/yadd/
cdkroot/ ip=192.168.0.3:192.168.0.43:::::off
WARNING: Frequency is not in HZ. Please consider using a newer bootloader!
WARNING: OLD intfreq = 66 busfreq = 66
WARNING: NEW intfreq = 66000000 busfreq = 66000000
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30632k available (1256k kernel code, 404k data, 76k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2d:7e:51
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00700000 : "root (cramfs)"
0x00700000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.0.3, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.0.3, domain=, nis-domain=(none),
bootserver=192.168.0.43, rootserver=192.168.0.43, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Looking up port of RPC 100003/2 on 192.168.0.43
Looking up port of RPC 100005/1 on 192.168.0.43
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 76k init
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: runaway modprobe loop assumed and stopped
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8
kmod: failed to exec /sbin/modprobe -s -k binfmt-0000, errno = 8