Nokia Kabel Box in Bootschleife

Wie blitze ich ein Bild - Permanent Outgoing Incomes
dwilx

Nokia Kabel Box in Bootschleife

Beitrag von dwilx »

Ich habe hier eine Nokia-Box für Kabel 2xI Avia500 GTX. Das Problem: die Box Bootet in einer Schleife. Hier mal ein Log:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Ich habe mal nur den Abschnitt des Logs hier rein gesetzt, der sich immer wiederholt. Am Display erscheint der übliche Bootkram und dann das LCD-Bootlogo bis dann "starting kernel" angezeigt wird. Dann gehts wieder von vorne los??? Flashen und auslesen geht alles. Die Box kommt halt nie weiter wie gerade beschrieben. Mit der Betanova ist das ähnlich. Da kommt auch nur die Bootanzeige im Display, ein paar Balken -- ENDE. Wieder alles von vorne. Die Box resettet sich praktisch imme wieder von selbst! Ich bin langsam am verzweifeln :cry: . Hat da jemand von Euch eine Idee?
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Poste mal das ganze Log.
There are 10 types of people in the world: those who know binary and those who don't
dwilx

Beitrag von dwilx »

Wie gesagt, dieser Abschnitt den ihr da seht ist das ganze Log. Der wiederholt sich immer und immer wieder. Mehr iss nicht!
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Das geht immer so weiter.

es fängt damit an: debug: DDF: Calibrating delay loop...
damit hörts auf: Uncompressing Kernel Image ... OK
also in dem Moment wo eigentlich im LCD das GUI-Menü kommen sollte, blitzt kurz das BR-Logo im Display auf und dann die Bootinfos, dann halt immer das Gleiche :cry:
thegoodguy
Erleuchteter
Erleuchteter
Beiträge: 465
Registriert: Mittwoch 14. August 2002, 20:45

Beitrag von thegoodguy »

Ich kann mich nur meinem Vorredner anschliessen. Poste bitte das ganze Log (vgl. FAQ).
dwilx

Beitrag von dwilx »

Wo soll ichs denn her nehmen, das was da steht ist alles!!!
Das Gleiche passiert auch beim Booten mit Yadd.
Nach der Zeile:
Uncompressing Kernel Image ... OK
steigt die Box aus und alles geht wieder von vorne los. Ich könnte 'ne Stunde das Log aufzeichnen und es würde nichts anderes dabei rauskommen!!
thegoodguy
Erleuchteter
Erleuchteter
Beiträge: 465
Registriert: Mittwoch 14. August 2002, 20:45

Beitrag von thegoodguy »

Klar ist das beim yadd auch so.
siehe
http://tuxbox.berlios.de/forum/viewtopic.php?t=15918
nach unten scrollen!!! Hast du das gemacht?
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

hi dixidix,
was man Dir zu sagen versucht, ist, daß Du an dieser Stelle
Options:
1: Console on null
2: Console on ttyS0
die 2 in die Tastatur hämmern sollst damit das Log noch weiter geschrieben wird :wink:
never change a running system
dwilx

Beitrag von dwilx »

@Solala

Hab ich schon mal gemacht. Dann kommt das dbox2-ppcboot> bzw. root> promt und sonst nichts.
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 575141 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 575077 Bytes = 561 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>

Die Box reagiert zwar dann beispielsweise auf reset und das hat soweit auch geklappt. Mehr passiert aber nicht! Leider

Hier scheint jemand ein ähnliches Problem zu haben:
http://tuxbox.berlios.de/forum/viewtopi ... highlight=

Könnte das zutreffen?
dwilx

Beitrag von dwilx »

Puh!!
Irgendwie ist es mir gelungen der Box etwas mehr zu entlocken.

Hier das Log
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30816k available (1120k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:18:d8:d2
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 00000000 LR: C00576EC SP: C1FF7D00 REGS: c1ff7c50 TRAP: 0200
Not tainted
MSR: 00001000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c1ff6000[1] 'init' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000283 C1FF7D00 C1FF6000 00000000 00000283 00001000 00000004 00001F02
GPR08: 00000000 00000000 00002820 00000000 24000082 00000000 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 84000000 C4000004 00000000 C0145AC0
GPR24: 000006E0 000006C0 C1FF7D24 C1FF7D08 00000280 00000003 00000003 C1F5FC00
Call backtrace:
C00576EC C0057EA8 C001FE74 C001FF18 C0021A14 C001CF4C C001D11C
C0009104 C0002814 00000000 0FF5B830 0FF5B798 3000A618 3000A6F4
3000DDCC
Kernel panic: Attempted to kill init!
<0>Rebooting in 180 seconds..Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 00000000 LR: C0016054 SP: C1FF79F0 REGS: c1ff7940 TRAP: 0200
Not tainted
MSR: 00001000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 20000000 LR: C000EF80 SP: C1FF7800 REGS: c1ff7750 TRAP: 0200
Not tainted
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 00000000 LR: C000EF80 SP: C1FF7610 REGS: c1ff7560 TRAP: 0200
Not tainted
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 00000000 LR: C010DA70 SP: C1FF6FE0 REGS: c1ff6f30 TRAP: 0200
Not tainted
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 00000000 LR: C000EF80 SP: C1FF6DF0 REGS: c1ff6d40 TRAP: 0200
Not tainted
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 00000000 LR: C000EF80 SP: C1FF6C00 REGS: c1ff6b50 TRAP: 0200
Not tainted
Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
NIP: 00001150 XER: 00000000 LR: C000EF80 SP: C1FF6A10 REGS: c1ff6960 TRAP: 0200
Not tainted
MSR: 00001000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c1ff6000[1] 'init' Last syscall: 6
last math 00000000 last altivec 00000000Machine check in kernel mode.
Caused by (from SRR1=1000): Transfer error ack signal
Oops: machine check, sig: 7
Oops: Kernel Mode Sofdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 Bog
oMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202996
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202996
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0044

will verify ELF image, start= 0x800000, size= 202996
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-26.49.26.07.00.00-20
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
Deswegen loopt die Box zwar immer noch, aber wenigtstens ist jetzt etwas mehr zu sehen.
Kann da jemand etwas erkennen?