Hi, leute ich habe ne Nokia 2xi für Kabel mit kaputten Display. Bis vorgestern ist sie wunderbar gelaufen ( ohne Display ausgabe).
Vorgestern habe ich von meinem Kumpel einen Display bekommen und versuchte es zu tauschen im Hoffnung, daß es endlich hell wird.
Leider ist dabei etwas passiert und seit dem bootet meine Box nicht mehr.
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-8e.3f.43.07.00.00-3d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 202996
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Aug 5 2002 - 09:06:03)
CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Die Dez 31 18:36:38 CET 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30816k available (1120k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:41:51:bb
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38C36F4 XER: 20000000 LR: C38C36D0 SP: C1D45E60 REGS: c1d45db0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d44000[26] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: FFFFFF80 C1D45E60 C1D44000 C38C3D30 C0131C38 C38C8000 C01F7980 C38C8000
GPR08: 00000000 00000000 C38C0000 C38C8000 22004048 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D45F40 C1D45EA8 10071CC4
GPR24: C1C4E000 C01F7940 00000004 00000060 FFFFFFEA C38C0000 C38C6FE0 C38C40F0
Call backtrace:
C38C36D0 C38C37AC C38C3C98 C0010190 C00025DC 10017A34 10018F18
10003C84 10003890 0FEF35F0 00000000
Bus error
.: Can't open /proc/bus/dbox.sh
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
.: Can't open /proc/bus/dbox.sh
Using /lib/modules/2.4.20/misc/fp.o
Using /lib/modules/2.4.20/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38E14EC XER: 20000000 LR: C38E1B2C SP: C1D45E40 REGS: c1d45d90 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d44000[37] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38E1B2C C1D45E40 C1D44000 00000080 00000000 C38E4000 C01F7CE0 C38E4000
GPR08: 00000000 00000000 C01F7CAC C38E4000 22004028 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D45F40 C1D45EA8 1007982C
GPR24: C1AF8000 C01F7CC0 C0130000 C38E0000 00000000 C0140000 C38E2D70 00000000
Call backtrace:
C38E1B2C C38E215C C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Bus error
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Using /lib/modules/2.4.20/misc/dmxdev.o
[FONT] initializing core...Using /lib/modules/2.4.20/misc/dvb_frontend.o
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.22 2002/09/13 22:53:55 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C000A938 XER: 00000000 LR: C3911CA4 SP: C1C97E60 REGS: c1c97db0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1c96000[47] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 55555555 C1C97E60 C1C96000 C3986000 0F0F0F0F 00100000 C3985FFC FFFFFFFE
GPR08: C01F7F00 C01F7F00 C3920000 C000A924 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01C97F40 C1C97EA8 30091440
GPR24: C18AD000 C01F7EE0 C0130000 C0135470 FFFFFFEA C0140000 00000000 C3920000
Call backtrace:
C3911C44 C39115FC C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Bus error
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init
Board unbekannt
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
CXA2092 found
avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3914640 XER: 00000000 LR: C3B8DB68 SP: C1C97E40 REGS: c1c97d90 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000700, DSISR: 00001809
TASK = c1c96000[59] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 00004000 C1C97E40 C1C96000 00000000 00000000 00004000 00000000 C013D883
GPR08: 00000000 00000000 00000000 C3920000 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01C97F40 C1C97EA8 1007A0B4
GPR24: C19B9000 C01F7FC0 C0130000 C0135470 FFFFFFEA C0140000 C3B8E208 00000001
Call backtrace:
00000000 C3B8DB68 C3B8DEC4 C0010190 C00025DC 10017A34 10018F18
10003C84 10003890 0FEF35F0 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: error - no demux found
Unmounting 'ramfs' on '/tmp'
insmod: init_module: avia_gt_vbi: Input/output error
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
Unmounting 'jffs2' on '/var'
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C39156E8 XER: 00000000 LR: C3B926E8 SP: C1C97E80 REGS: c1c97dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 0000040B
TASK = c1c96000[78] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 00000000 C1C97E80 C1C96000 C3B93998 C3B9398C C3B93994 FF000000 C013D883
GPR08: 00000000 C3920000 FF002830 00000000 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01C97F40 C1C97EA8 10077E3C
GPR24: C1D0D000 C01F7560 C0130000 C0135470 C3B90000 C0140000 00000000 C3B92000
Call backtrace:
C3B9267C C0010190 C00025DC 10017A34 10018F18 10003C84 10003890
0FEF35F0 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.11 2002/09/25 18:50:52 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3916CE0 XER: 00000000 LR: C389F768 SP: C1C97E80 REGS: c1c97dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 00000409
TASK = c1c96000[83] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C389F75C C1C97E80 C1C96000 00000080 00000080 00000001 FF000000 C013D883
GPR08: 00000000 00000000 C3920000 C1C97DA0 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01C97F40 C1C97EA8 10074D20
GPR24: C1A8C000 C01F7660 C0130000 C0135470 FFFFFFEA C0140000 C389FC40 C389F000
Call backtrace:
C0140000 C389F75C C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
Ready to shutdown system...
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
System halted.
nach dem reset ( boot net)
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-8e.3f.43.07.00.00-3d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root>
Was kann es sein? Hat jemand ne Idee
Boot prob`s
-
badziu
- Interessierter
- Beiträge: 28
- Registriert: Mittwoch 2. Januar 2002, 21:36
-
SoLaLa
- Tuxboxer
- Beiträge: 6119
- Registriert: Mittwoch 3. April 2002, 00:32
also erstmal neu flashen, weil da is mit Sicherheit was kaputt im Image...
das elfcopy failed 16 kann seine Ursache in Firewall, Virenscanner, Mediasensing, IPadressen oder solchem Zeugs haben.
Poste mal vom Flashvorgang das Netzwerklog dazu (der graue Kasten oben im Bootmanager)
das elfcopy failed 16 kann seine Ursache in Firewall, Virenscanner, Mediasensing, IPadressen oder solchem Zeugs haben.
Poste mal vom Flashvorgang das Netzwerklog dazu (der graue Kasten oben im Bootmanager)
never change a running system
-
badziu
- Interessierter
- Beiträge: 28
- Registriert: Mittwoch 2. Januar 2002, 21:36
@ SoLaLa
da sind sie
***Adapter Desc: Realtek RTL8029(AS)-PCI-Ethernetadapter (via IpHlpApi #0)
***MAC address: 00:02:44:2D:2D:E5 Local IP: 192.168.0.203
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\Downloads\dboxboot\ppcboot_writeflash"...
TFTP> Transfer finished, sent 394 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Downloads\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\Downloads\dboxboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Downloads\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\Downloads\dboxboot\logo-fb"...
TFTP> Transfer finished, sent 85 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C:\Downloads\flashimage.img"
TFTP> Started TFTP-Transfer for "C:\Downloads\flashimage.img"...
TFTP> Transfer finished, sent 16129 blocks
und von Comterminal
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-8e.3f.43.07.00.00-3d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.203, My IP 192.168.0.201
debug: Sending TFTP-request for file C/Downloads/dboxboot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-51-bb
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.203; our IP address is 192.168.0.201
Filename 'C/Downloads/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.203; our IP address is 192.168.0.201
Filename 'C/Downloads/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/Downloads/flashimage.img
BOOTP broadcast 1
TFTP from server 192.168.0.203; our IP address is 192.168.0.201
Filename '/C/Downloads/flashimage.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
#############################################################T #################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
########################
done
dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors
dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... done
dbox2-ppcboot>
da sind sie
***Adapter Desc: Realtek RTL8029(AS)-PCI-Ethernetadapter (via IpHlpApi #0)
***MAC address: 00:02:44:2D:2D:E5 Local IP: 192.168.0.203
***BootP server started... Port 67
***TFTP server started... Port 69
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\Downloads\dboxboot\ppcboot_writeflash"...
TFTP> Transfer finished, sent 394 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Downloads\tftpboot\logo-lcd"
TFTP> Started TFTP-Transfer for "C:\Downloads\dboxboot\logo-lcd"...
TFTP> Transfer finished, sent 16 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C\Downloads\tftpboot\logo-fb"
TFTP> Started TFTP-Transfer for "C:\Downloads\dboxboot\logo-fb"...
TFTP> Transfer finished, sent 85 blocks
BootP> Created dynamic ARP entry for DBoxIP 192.168.0.201 with MAC 00:50:9C:41:51:BB
BootP> Answer sent!
TFTP> Non-BootP TFTP-transfer requested "C:\Downloads\flashimage.img"
TFTP> Started TFTP-Transfer for "C:\Downloads\flashimage.img"...
TFTP> Transfer finished, sent 16129 blocks
und von Comterminal
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-8e.3f.43.07.00.00-3d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.203, My IP 192.168.0.201
debug: Sending TFTP-request for file C/Downloads/dboxboot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-51-bb
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.203; our IP address is 192.168.0.201
Filename 'C/Downloads/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.203; our IP address is 192.168.0.201
Filename 'C/Downloads/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/Downloads/flashimage.img
BOOTP broadcast 1
TFTP from server 192.168.0.203; our IP address is 192.168.0.201
Filename '/C/Downloads/flashimage.img'.
Load address: 0x120000
Loading: #######################################################################
################################################################################
################################################################################
#############################################################T #################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
########################
done
dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors
dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash... done
dbox2-ppcboot>
-
badziu
- Interessierter
- Beiträge: 28
- Registriert: Mittwoch 2. Januar 2002, 21:36
-
badziu
- Interessierter
- Beiträge: 28
- Registriert: Mittwoch 2. Januar 2002, 21:36
und noch was
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Die Dez 31 18:36:38 CET 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30816k available (1120k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:41:51:bb
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38C36F4 XER: 20000000 LR: C38C36D0 SP: C1D55E60 REGS: c1d55db0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d54000[26] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: FFFFFF80 C1D55E60 C1D54000 C38C3D30 C0131C38 C38C8000 C01F7A40 C38C8000
GPR08: 00000000 00000000 C38C0000 C38C8000 22004048 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D55F40 C1D55EA8 10071CC4
GPR24: C1C40000 C01F7A00 00000004 00000060 FFFFFFEA C38C0000 C38C6FE0 C38C40F0
Call backtrace:
C38C36D0 C38C37AC C38C3C98 C0010190 C00025DC 10017A34 10018F18
10003C84 10003890 0FEF35F0 00000000
Bus error
.: Can't open /proc/bus/dbox.sh
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
.: Can't open /proc/bus/dbox.sh
Using /lib/modules/2.4.20/misc/lcd.o
Using /lib/modules/2.4.20/misc/fp.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38E14EC XER: 20000000 LR: C38E1B2C SP: C1D55E40 REGS: c1d55d90 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d54000[37] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38E1B2C C1D55E40 C1D54000 00000080 00000000 C38E4000 C01F7CE0 C38E4000
GPR08: 00000000 00000000 C01F7CAC C38E4000 22004028 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D55F40 C1D55EA8 1007982C
GPR24: C1AF8000 C01F7CC0 C0130000 C38E0000 00000000 C0140000 C38E2D70 00000000
Call backtrace:
C38E1B2C C38E215C C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Bus error
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
i2c-CAM read error.
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[AVS] i2c error -121
i2c-CAM read error.
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[AVS] i2c error -121
i2c-CAM read error.
[AVS] i2c error -121
i2c-CAM read error.
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.22 2002/09/13 22:53:55 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C000A938 XER: 00000000 LR: C3911CA4 SP: C1A11E60 REGS: c1a11db0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1a10000[47] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 55555555 C1A11E60 C1A10000 C3986000 0F0F0F0F 00100000 C3985FFC FFFFFFFE
GPR08: C01F7F00 C01F7F00 C3920000 C000A924 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 30091440
GPR24: C18AD000 C01F7EE0 C0130000 C0135470 FFFFFFEA C0140000 00000000 C3920000
Call backtrace:
C3911C44 C39115FC C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Bus error
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init
Board unbekannt
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
CXA2092 found
avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3914640 XER: 00000000 LR: C3B8DB68 SP: C1A11E40 REGS: c1a11d90 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000700, DSISR: 00001809
TASK = c1a10000[59] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 00004000 C1A11E40 C1A10000 00000000 00000000 00004000 00000000 C013D883
GPR08: 00000000 00000000 00000000 C3920000 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 1007A0B4
GPR24: C19F9000 C01F7FC0 C0130000 C0135470 FFFFFFEA C0140000 C3B8E208 00000001
Call backtrace:
00000000 C3B8DB68 C3B8DEC4 C0010190 C00025DC 10017A34 10018F18
10003C84 10003890 0FEF35F0 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: error - no demux found
insmod: init_module: avia_gt_vbi: Input/output error
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C39156E8 XER: 00000000 LR: C3B926E8 SP: C1A11E80 REGS: c1a11dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 0000040B
TASK = c1a10000[62] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 00000000 C1A11E80 C1A10000 C3B93998 C3B9398C C3B93994 FF000000 C013D883
GPR08: 00000000 C3920000 FF002830 00000000 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 10077E3C
GPR24: C19F1000 C19AC1E0 C0130000 C0135470 C3B90000 C0140000 00000000 C3B92000
Call backtrace:
C3B9267C C0010190 C00025DC 10017A34 10018F18 10003C84 10003890
0FEF35F0 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.11 2002/09/25 18:50:52 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3916CE0 XER: 00000000 LR: C3B95768 SP: C1A11E80 REGS: c1a11dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 00000409
TASK = c1a10000[63] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C3B9575C C1A11E80 C1A10000 00000080 00000080 00000001 FF000000 C013D883
GPR08: 00000000 00000000 C3920000 C1A11DA0 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 10074D20
GPR24: C19AA000 C19AC220 C0130000 C0135470 FFFFFFEA C0140000 C3B95C40 C3B95000
Call backtrace:
C0140000 C3B9575C C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
[AVS] i2c error -121
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3919858 XER: 20000000 LR: C3B975F4 SP: C1A11E80 REGS: c1a11dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 0000040A
TASK = c1a10000[64] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C3B975F4 C1A11E80 C1A10000 00009470 00000000 000021B6 00000000 00000000
GPR08: C0136FEC C3920000 00000000 5A5A5A5A 82004022 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 10074EEC
GPR24: C19EE000 C19AC260 C0130000 C0135470 FFFFFFEA C0140000 C3B97D20 C3B97000
Call backtrace:
C0140000 C3B975F4 C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Segmentation fault
cdkVcInfo $Id: cdkVcInfo.c,v 1.1 2002/12/19 16:10:45 alexW Exp $
[cdkVcInfo] init(LCD_MODE_BIN): Device or resource busy
$Id: sectionsd.cpp,v 1.148 2002/12/09 20:07:52 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
$Id: zapit.cpp,v 1.286 2003/01/03 12:41:31 alexw Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conffor reading.
/var/tuxbox/config/zapit/services.xml: No such file or directory
[frontend.cpp:CFrontend:67] FE_GET_INFO: Operation not permitted
[zapit] unable to open frontend devices. bye.
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
Controld $Id: controld.cpp,v 1.88 2003/01/07 19:08:27 Zwen Exp $
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[ConfigFile] Unable to open file /var/tuxbox/config/controld.conffor reading.
[controld] /var/tuxbox/config/controld.conf not found
[nhttpd] Neutrino HTTP-Server starting..
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
Unmounting 'ramfs' on '/tmp'
umount: /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.396 2003/02/02 16:00:56 dirch Exp $
clear failed: Device or resource busy
[lcdd] time-skin not found -> using default...
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
[ConfigFile] Unable to open file /var/tuxbox/config/lcdd.conffor reading.
[lcdd] save config
[ConfigFile] Unable to open file /var/tuxbox/config/lcdd.conffor writing.
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
Ready to shutdown system...
Sending SIGTERM to all processes.[nhttpd] stop requested......
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
i2c-CAM read error.
System halted.
[AVS] i2c error -121
### FS load compleate: 634725 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 634661 Bytes = 619 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.20 (von alexW) Wer Kernels nachmacht, oder faelscht, wird best
raft ;-) #1 Die Dez 31 18:36:38 CET 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30816k available (1120k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:41:51:bb
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v0.61.pre (2002.09.22-12:09+0000) multi-caUsing /lib/modu
les/2.4.20/misc/i2c-8xx.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.20/misc/info.o
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38C36F4 XER: 20000000 LR: C38C36D0 SP: C1D55E60 REGS: c1d55db0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d54000[26] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: FFFFFF80 C1D55E60 C1D54000 C38C3D30 C0131C38 C38C8000 C01F7A40 C38C8000
GPR08: 00000000 00000000 C38C0000 C38C8000 22004048 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D55F40 C1D55EA8 10071CC4
GPR24: C1C40000 C01F7A00 00000004 00000060 FFFFFFEA C38C0000 C38C6FE0 C38C40F0
Call backtrace:
C38C36D0 C38C37AC C38C3C98 C0010190 C00025DC 10017A34 10018F18
10003C84 10003890 0FEF35F0 00000000
Bus error
.: Can't open /proc/bus/dbox.sh
Using /lib/modules/2.4.20/misc/event.o
event: init ...
Using /lib/modules/2.4.20/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
Using /lib/modules/2.4.20/misc/saa7126.o
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
.: Can't open /proc/bus/dbox.sh
Using /lib/modules/2.4.20/misc/lcd.o
Using /lib/modules/2.4.20/misc/fp.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface on 1
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Using /lib/modules/2.4.20/misc/dvb_demux.o
Using /lib/modules/2.4.20/misc/dvbdev.o
Using /lib/modules/2.4.20/misc/avia.o
AVIA: $Id: avia_core.c,v 1.32 2002/09/24 17:50:19 Jolt Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38E14EC XER: 20000000 LR: C38E1B2C SP: C1D55E40 REGS: c1d55d90 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d54000[37] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38E1B2C C1D55E40 C1D54000 00000080 00000000 C38E4000 C01F7CE0 C38E4000
GPR08: 00000000 00000000 C01F7CAC C38E4000 22004028 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01D55F40 C1D55EA8 1007982C
GPR24: C1AF8000 C01F7CC0 C0130000 C38E0000 00000000 C0140000 C38E2D70 00000000
Call backtrace:
C38E1B2C C38E215C C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Bus error
Using /lib/modules/2.4.20/misc/cam.o
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
i2c-CAM read error.
Using /lib/modules/2.4.20/misc/dmxdev.o
Using /lib/modules/2.4.20/misc/dvb_frontend.o
[FONT] initializing core...
[FONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[FONT] Intializing font cache...
[FONT] FTC_Face_Requester (Micron/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[AVS] i2c error -121
i2c-CAM read error.
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[AVS] i2c error -121
i2c-CAM read error.
[AVS] i2c error -121
i2c-CAM read error.
Using /lib/modules/2.4.20/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.22 2002/09/13 22:53:55 Jolt Exp $
avia_gt_core: autodetecting chip type... AViA eNX found
avia_gt_enx: $Id: avia_gt_enx.c,v 1.13 2002/09/02 19:25:37 Jolt Exp $
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C000A938 XER: 00000000 LR: C3911CA4 SP: C1A11E60 REGS: c1a11db0 TRAP: 0200
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1a10000[47] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 55555555 C1A11E60 C1A10000 C3986000 0F0F0F0F 00100000 C3985FFC FFFFFFFE
GPR08: C01F7F00 C01F7F00 C3920000 C000A924 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 30091440
GPR24: C18AD000 C01F7EE0 C0130000 C0135470 FFFFFFEA C0140000 00000000 C3920000
Call backtrace:
C3911C44 C39115FC C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Bus error
Using /lib/modules/2.4.20/misc/dvb.o
dvb.c: init_dvb
Init
Board unbekannt
Using /lib/modules/2.4.20/misc/avia_gt_napi.o
CXA2092 found
avia_gt_napi: $Id: avia_gt_napi.c,v 1.130 2002/09/18 15:57:24 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3914640 XER: 00000000 LR: C3B8DB68 SP: C1A11E40 REGS: c1a11d90 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000700, DSISR: 00001809
TASK = c1a10000[59] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 00004000 C1A11E40 C1A10000 00000000 00000000 00004000 00000000 C013D883
GPR08: 00000000 00000000 00000000 C3920000 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 1007A0B4
GPR24: C19F9000 C01F7FC0 C0130000 C0135470 FFFFFFEA C0140000 C3B8E208 00000001
Call backtrace:
00000000 C3B8DB68 C3B8DEC4 C0010190 C00025DC 10017A34 10018F18
10003C84 10003890 0FEF35F0 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_vbi.o
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.16 2002/08/22 13:39:33 Jolt Exp $
avia_gt_vbi: error - no demux found
insmod: init_module: avia_gt_vbi: Input/output error
Using /lib/modules/2.4.20/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.36 2002/08/22 13:39:33 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C39156E8 XER: 00000000 LR: C3B926E8 SP: C1A11E80 REGS: c1a11dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 0000040B
TASK = c1a10000[62] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 00000000 C1A11E80 C1A10000 C3B93998 C3B9398C C3B93994 FF000000 C013D883
GPR08: 00000000 C3920000 FF002830 00000000 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 10077E3C
GPR24: C19F1000 C19AC1E0 C0130000 C0135470 C3B90000 C0140000 00000000 C3B92000
Call backtrace:
C3B9267C C0010190 C00025DC 10017A34 10018F18 10003C84 10003890
0FEF35F0 00000000
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.11 2002/09/25 18:50:52 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3916CE0 XER: 00000000 LR: C3B95768 SP: C1A11E80 REGS: c1a11dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 00000409
TASK = c1a10000[63] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C3B9575C C1A11E80 C1A10000 00000080 00000080 00000001 FF000000 C013D883
GPR08: 00000000 00000000 C3920000 C1A11DA0 0000000D 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 10074D20
GPR24: C19AA000 C19AC220 C0130000 C0135470 FFFFFFEA C0140000 C3B95C40 C3B95000
Call backtrace:
C0140000 C3B9575C C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
[AVS] i2c error -121
Segmentation fault
Using /lib/modules/2.4.20/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.4 2002/08/22 13:39:33 Jolt Exp $
Oops: kernel access of bad area, sig: 11
NIP: C3919858 XER: 20000000 LR: C3B975F4 SP: C1A11E80 REGS: c1a11dd0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 0000040A
TASK = c1a10000[64] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C3B975F4 C1A11E80 C1A10000 00009470 00000000 000021B6 00000000 00000000
GPR08: C0136FEC C3920000 00000000 5A5A5A5A 82004022 10064168 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01A11F40 C1A11EA8 10074EEC
GPR24: C19EE000 C19AC260 C0130000 C0135470 FFFFFFEA C0140000 C3B97D20 C3B97000
Call backtrace:
C0140000 C3B975F4 C0010190 C00025DC 10017A34 10018F18 10003C84
10003890 0FEF35F0 00000000
Segmentation fault
cdkVcInfo $Id: cdkVcInfo.c,v 1.1 2002/12/19 16:10:45 alexW Exp $
[cdkVcInfo] init(LCD_MODE_BIN): Device or resource busy
$Id: sectionsd.cpp,v 1.148 2002/12/09 20:07:52 thegoodguy Exp $
caching 504 hours
events are old 60min after their end time
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
$Id: zapit.cpp,v 1.286 2003/01/03 12:41:31 alexw Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conffor reading.
/var/tuxbox/config/zapit/services.xml: No such file or directory
[frontend.cpp:CFrontend:67] FE_GET_INFO: Operation not permitted
[zapit] unable to open frontend devices. bye.
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
Controld $Id: controld.cpp,v 1.88 2003/01/07 19:08:27 Zwen Exp $
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[ConfigFile] Unable to open file /var/tuxbox/config/controld.conffor reading.
[controld] /var/tuxbox/config/controld.conf not found
[nhttpd] Neutrino HTTP-Server starting..
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: No such file or directory
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
Unmounting 'ramfs' on '/tmp'
umount: /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[neutrino] NeutrinoNG $Id: neutrino.cpp,v 1.396 2003/02/02 16:00:56 dirch Exp $
clear failed: Device or resource busy
[lcdd] time-skin not found -> using default...
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[lcdd] load config
[ConfigFile] Unable to open file /var/tuxbox/config/lcdd.conffor reading.
[lcdd] save config
[ConfigFile] Unable to open file /var/tuxbox/config/lcdd.conffor writing.
[FONT] initializing core...
[FONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[FONT] Intializing font cache...
[sectionsd] DMX: /dev/dvb/card0/demux0: Invalid argument
Ready to shutdown system...
Sending SIGTERM to all processes.[nhttpd] stop requested......
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
i2c-CAM read error.
System halted.
[AVS] i2c error -121
-
Mordillo
- Erleuchteter
- Beiträge: 539
- Registriert: Dienstag 9. April 2002, 12:49
Kommt mir sehr bekannt vor...
Zieh mal das Display wieder ab und versuch das ganze mal ohne Display.
Nehme an dein Display, bzw. der FP ist für die Ansteuerung des Display nicht mehr zu gebrauchen, daher blockiert hier so einiges.
Display mal abziehen und dann weitersehen.
Was issn das eigentlich fürn Image??
Zieh mal das Display wieder ab und versuch das ganze mal ohne Display.
Nehme an dein Display, bzw. der FP ist für die Ansteuerung des Display nicht mehr zu gebrauchen, daher blockiert hier so einiges.
Display mal abziehen und dann weitersehen.
Was issn das eigentlich fürn Image??
Philips 2XI Avia 600; Sat
Micronik TV-Box 1200S MAM600+ inc. Irdeto-, Secacams
Nach Änderungen an Neutrino.cpp kann ich jetzt auch die Zukunft deuten.
Micronik TV-Box 1200S MAM600+ inc. Irdeto-, Secacams
Nach Änderungen an Neutrino.cpp kann ich jetzt auch die Zukunft deuten.