Flash defect!!

Wie blitze ich ein Bild - Permanent Outgoing Incomes
leo
Neugieriger
Neugieriger
Beiträge: 13
Registriert: Dienstag 19. Februar 2002, 21:31

Flash defect!!

Beitrag von leo »

Ich bekomme diese fehler meldung.....

BOOTP broadcast 3
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'E/Programme/tftpboot/kernel-cdk'.
Load address: 0x100000
Loading: debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-6d.e0.05.08.00.00-ca
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.202
debug: Sending TFTP-request for file E/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-33-7a-59
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'E/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename 'E/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial


1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 100000 /E/Programme/DBoxBoot/DBox2/AlexW1.6_2xi.img
BOOTP broadcast 1
TFTP from server 192.168.0.1; our IP address is 192.168.0.202
Filename '/E/Programme/DBoxBoot/DBox2/AlexW1.6_2xi.img'.
Load address: 0x100000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################
done

dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 63 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
Flashed 3MBFailure after flash
Timeout writing to Flash

dbox2-ppcboot>
SoLaLa
Tuxboxer
Tuxboxer
Beiträge: 6119
Registriert: Mittwoch 3. April 2002, 00:32

Beitrag von SoLaLa »

das liegt bestimmt an dem image....
was isn das für eins?
naja, aber der timeout is dropsdem nich schön, ich geh mal davon aus, daß das ne 1xI Sagem ist.
Es könnte helfen die kompletten Kommandos zum erasen und flashen manuell einzutippen,
wenns nicht hilft, dann ist der flash wahrscheinlich kaputt
never change a running system