haber ich kann keine image drauf machen mit diese meldung geht nicht mer weiter,,,,,,
Gruss ZioPeppe@Original und Danke
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-07.b6.d1.07.00.00-9f
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 21:12:06)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Sagem
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
LCD: Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
ARP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
Bytes transferred = 7680 (1e00 hex)
ready
FB: Scanning JFFS2 FS:
.find_inode failed for name=tuxbox
load: Failed to find inode
can't find logo in flash - try network
ARP broadcast 1
TFTP from server 192.168.1.5; our IP address is 192.168.1.27
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########
Bytes transferred = 43045 (a825 hex)
loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/WINDOWS/Desktop/Image/mtd4_1x1.img
=>