ich habe hier die DBox eines Bekannten mit 2x AMD und nur 16MB RAM.
Die Speichererweiterung scheint wohl "verlorengegangen" zu sein.
Wollte jetzt mit ppcboot1.1.6 ein Image auf die Box bringen,
klappt aber nicht...
Das Log sieht so aus:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-17.50.80.07.00.00-d5
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.5, My IP 192.168.0.100
debug: Sending TFTP-request for file C/dbox2/ppcboot116
will verify ELF image, start= 0x800000, size= 201716
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (May 30 2002 - 15:38:28)
CPU: PPC823ZTnnA at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 16 MB
FLASH: 8 MB
Scanning JFFS2 FS:

find_inode failed for name=env
load: Failed to find inode
LCD: Scanning JFFS2 FS:

find_inode failed for name=logo-lcd
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
Abort
*** ERROR: `serverip' not set
can't find logo
FB: Scanning JFFS2 FS:

find_inode failed for name=logo-fb
load: Failed to find inode
can't find logo in flash - try network
*** ERROR: `serverip' not set
can't find logo - no init
In: serial
Out: serial
Err: serial
Hit any key to stop autoboot: 0
=> bootp 00100000 /c/dbox2/13.img
=> tftp
*** ERROR: `serverip' not set
=>
Was will mir diese Fehlermeldung sagen und wie kann ich das abstellen
Gruß Kaa