Probleme beim Flashen

[namia]

sorry

Meldung : Bootvorgang Erkannt warte auf ppcboot

[SoLaLa]

und doppelt grimmig is schon garnicht gut

[namia]

Was Meinst du mit grimmig ?

erstmal danke für die antwort !

So weit bin ich jetzt gekommen :

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-5b.be.ca.07.00.00-5e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203252
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
find_inode failed for name=ppcboot.conf
load: Failed to find inode
LCD: find_inode failed for name=logo-lcd
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
ARP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.1
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-5b.be.ca.07.00.00-5e
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203252
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)

CPU: PPC823ZTnnB2 at 65.900 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . .
find_inode failed for name=ppcboot.conf
load: Failed to find inode
LCD: find_inode failed for name=logo-lcd
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1
ARP broadcast 1
TFTP from server 192.168.0.2; our IP address is 192.168.0.1
Filename 'logo-lcd'.
Load address: 0x100000
Loading: *

Warte auf ppcBoot

[Tom1069]

boot net failed

Die Lösung findest du auf Dietmars Seite:
http://www.dietmar-h.net/flashprob.html