super,
ich hoffe das das Log vollständig ist.
{debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-89.d8.96.07.00.00-b3
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0052
will verify ELF image, start= 0x800000, size= 202740
verify sig: 262
Branching to 0x40000
PPCBoot 1.1.6 (TuxBox) (Jul 13 2002 - 20:02:35)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Phillips
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .
.
LCD: ready
FB: loading - ready
In: serial
Out: serial
Err: serial
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load compleate: 587898 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 587834 Bytes = 574 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.19-rc1-dbox2 (tuxbox@linux) (gcc version 3.1) #4 Sam Jul 20 13
:17:12 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.53 BogoMIPS
Memory: 30924k available (1024k kernel code, 356k data, 64k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (
rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
i2c-proc.o version 2.6.1 (20010825)
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2a:22:56
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00660000 : "root (cramfs)"
0x00660000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k init
init started: BusyBox v0.60.2 (2002.07.18-19:16+0000) multi-call Bad inittab en
try: ::restart:/sbin/init
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
event: init ...
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [](pos. 0).
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade alternativen avia.o
der moment ist gekommen...
AVIA: $Id: avia_core.c,v 1.30 2002/05/06 02:18:18 obi Exp $
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
mice: PS/2 mouse device common for all mice
BusyBox v0.60.2 (2002.07.18-19:16+0000) multi-call binary
Usage: busybox [function] [arguments]...
or: [function] [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use, and BusyBox
will act like whatever it was invoked as.
Currently defined functions:
write 1 event's ...ybox, cat, chgrp, chmod, chown, clear, cp, date, dd,
write 1 event's ...
df, dmesg
, env, false, du, echo, gunzip, gzip, find, grep
, ls, mkdirmore, mountt hostname, klogd, ln, kill, killall,
, ping, ps, mv, nslookup, reset, rm, pwd, reboot
, rmdir,, sed, sh route, syslogd, tail, sleep, sync, touch,, tar, testtrue
, uptime, vi, umount, uname, xargs, yes, wget, which
, zcat
lede alternativen avia_gt.od.lc io:t nid lcivdr merulod
a2.ocdfo: d un07KS/S1315ED l3X icderntcefan o
a_vi_cgte:orId $av: _giacot_.cre 1,v0 .202206//0 107004:3 :2bitm Enc $xpav
adiacot_: retoautedeinctchg tipe.yp A..A ViX eNunfo
a_vi_egt: nxd:$Ivi agta_nx_e,v.c.1 1201 /002076/7: 1:453Jo5 Elt sMUrskaxp E
E$iaavt__gx:dmId $av: _giadmt_c,x.1.v 2882/00/006187 6::0 J03t olp Ex
-INXTeNI->d
0erthMIe T GH nbeTSo (
agta_v:_gId $av: _giagvt_,v.c.2 1200 /002076/8: 1:006Jo3 Elt $xpav
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57av
_giapct_ $m:: Idiaavt__gm.pcv c,141.00 2062/7 /0:018036:ol JExt $
agta_ap_cretu$I: ad:a_vi_cgttuap.cre 1,v0 .202206//0 107068:3 :0ltJoxp E
a$iaavt__gg:piId $av: _giapit_c,g.1.v 2262/00/006187 6::0 J03t olp Ex
a_vi_igt $r:: Idiaavt__g.cir 1,v8 .102206//0 107068:3 :0ltJoxp E
$iaavt__grecoLo: edadVi AeNA GTX/drX erivInit TDA8044H
2c
ior-co:e.ri dr veA8TD4H04VB DEC DERODeg rteisd.retd
04a8.o4hat: chtag inA8TD4H04t ad00xi2
[FONT] initializing core....gireerst tedado teap[]r os(p4).
ncsy01: Lade alternativen avia_gt_napi.o
[FONT] adding font /share/fonts/
micron_bold.ttf...OK (Micron/Bold)vi[FONT] Intializing font cache...agta_ap_n $i
a$ Idiaavt__gpina,v.c.8 120x /002037/ol JEMt SkU s arp Ex
a_vi_ngti:apar wngnimi, lisaedgnue q 0ueis (2a 3, 00zesi00 1),00li aingn..g.
ncsy01: [FONT] FTC_Face_Requester (Micron
avde alternativen avia_gt_vbi.o/Bold)
_giavbt_ $i:: Idiaavt__gi.vbv c,121.00 2062/7 /0:018036:ol JExt $
Lade alternativen avia_gt_fb.oX AeNA GTX/ p vi
sy
: nc
21ncsy21: sy
: nc
21ncsy21: av
a$iafbt_$I: ad:a_vi_fgtcob_.cre 1,v1 .302205//0 030390:3 :0i obp Ex
a_vi_ggt sv:_ietutnpod_m(me e=od
3)iaavt__g: gvt_sepuinsit_ (zedtwi72h= h0,ghei57t=
6)iaavt__g: gvt_sepuinmot_ (dedemo)
agta_v:_get snp_i_sute izid(w=7th, 20ighe=5ht)
agta_v:_get snp_i_mute odod(m3)e=av 76vi
_giagvt_se: int_t_puzesiwi (h=dt0,72ei ht=gh6)57Co
olns se:tcwinghio tloco furmerauf br fevide 9ce360xav
_giafbt_fb: A0:A ViX/eNX GTamFrufebr feamfrbue erffev de
s12c: icyn
c:yn1
s12c: 0yn
c:ynd
s10c: 0yn
c:yn1
s10c: 2yn
Ich habe übrigens ein emu_0718_2x_rc1_base16_fix1 Image drauf, von wann es ist weiss ich allerdings nicht!!!
mfg
Cybersat
auch richtige Kurzschlüsse auf den versorgungsspannungen aus dem netzteil produziert schau mal nach ob da überhaupt die LNCspannung aus der box rauskommt (14/18Volt)
