So hab mal ein Log vom Bootvorgang und vom einrichten der Swap-Partition gemacht hoffe das hilft.
Code: Alles auswählen
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0044
will verify ELF image, start= 0x800000, size= 178732
verify sig: 262
Branching to 0x40100
U-Boot 2011.12 (Tuxbox) (Mar 09 2012 - 22:17:18)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Philips, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MiB
Flash: 8 MiB
Scanning JFFS2 FS: .. done.
env: found baudrate with value 9600
env: found console with value ttyS0
env: found dbox_duplex with value 0
env: found lcd_bias with value 0
env: found lcd_contrast with value 15
env: found lcd_inverse with value 0
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC
LCD: ready
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
............................................................... done
Un-Protected 63 sectors
### FS (squashfs) loading 'vmlinuz' to 0x200000
### FS load complete: 667034 bytes loaded to 0x200000
## Booting kernel from Legacy Image at 00200000 ...
Image Name: Linux-2.4.37.11-dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 666970 Bytes = 651.3 KiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.37.11-dbox2 (riker@vmware-suse) (gcc version 3.4.6) #1 Sa 29.
Sep 20:30:18 CEST 2012
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs console=ttyS0,9600
dbox_duplex=0
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30832k available (1132k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:2d:79:78
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (squashfs+lzma)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.19.4 (2012-09-29 20:44:40 CEST)
starting pid 8, tty '': '/etc/init.d/sysinit'
[BOOT] running /etc/init.d/sysinit
Thu Jan 1 01:00:00 UTC 1970
starting pid 22, tty '': '/etc/init.d/rcS'
Please press Enter to activate this console. starting /etc/init.d/S01update ...
starting /etc/init.d/S05drivers ...
[BOOT] running /etc/init.d/S05drivers
tuxbox: IDE-Interface detected, Vendor: Gurgel
Detected STB:
Vendor: Philips
Model: D-BOX2 (2 flash chips)
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
$Id: cam.c,v 1.33 2011/06/19 11:49:27 rhabarber1848 Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.106 2011/06/19 11:49:27 rhabarber1848 Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: AVIA 600L found.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.15 2007/07/29 18:14:12 papst Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.216 2012/03/07 18:31:52 rhabarber1848 Exp $
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.28 2009/03/22 12:37:58 rhabarber1848 Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.14 2011/06/19 11:49:27 rhabarber1848 Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.208 2011/06/19 11:51:17 rhabarber1848 Exp
$
starting /var/etc/init.d/S06hdd ...
/var/etc/init.d/06hdd generated from neutrino ide/mmc/hdd drive-setup
28.11.2012 - 09:33:15
1.93 do not edit!
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dboxide: $Id: main.c,v 1.17 2012/08/29 17:58:04 rhabarber1848 Exp $
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of IDE-Interface is at: 0xc3b8c000
dboxide: IDE-Interface detected, Vendor: Gurgel
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: timeout, drive is still busy
dboxide: sreset failed, status: 0x0080
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
starting /var/etc/init.d/S07mounts ...
/var/etc/init.d/07mounts generated from neutrino ide/mmc/hdd drive-setup
28.11.2012 - 09:33:15
1.93 do not edit!
mount: using /var/etc/fstab
swapon: using /var/etc/fstab
starting /etc/init.d/S10network ...
starting /etc/init.d/S10rtc ...
starting /etc/init.d/S15syslogd ...
starting /etc/init.d/S16lircd ...
Jan 1 02:02:29 dbox syslog.info syslogd started: BusyBox v1.19.4
starting /etc/init.d/S18rdate ...
starting /etc/init.d/S20inetd ...
starting /etc/init.d/S25cdkVcInfo ...
starting /etc/init.d/S30autofs ...
[BOOT] Starting the automounter
starting /etc/init.d/S31nfsserver ...
starting /etc/init.d/S40tuxcald ...
starting /etc/init.d/S40tuxmaild ...
Jan 1 02:02:34 dbox daemon.err automount[195]: failed to load mapstarting /etc/
init.d/S99gui ...
$Id: sectionsd.cpp,v 1.344 2012/09/23 08:25:00 rhabarber1848 Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 2 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.463 2012/08/14 18:24:12 rhabarber1848 Exp $
[zapit] Load ScanSetup Setting: 0 0.000000 0.000000 1 1 8
[frontend] uncommitted_switch_mode 0 auto_fec 0
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
/tmp/currentservices.xml: No such file or directory
[controld] Boxtype detected: (2, Philips D-BOX2)
[controld]: ROUTEVIDEO v1 = 1 a1 = 1 v2 = 1 a2 = 1 v3 = 1 a3 = 1 fblk=1
SET VSW: 0 1
SET VSW: 1 1
SET VSW: 2 1
[CVideo::setVideoFormat] output format: 4:3(LB)
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/SemiCondensed)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[neutrino] SetupFonts filename: /share/fonts/micron.ttf fontname: Micron
[rcinput] no file /var/tuxbox/config/rc.conf was found
/dev/input/event1: No such file or directory
[network config] Instance created
[neutrino] menue setup
[neutrino] init menus...
[neutrino] GUI-Personalize instance created...
[neutrino] found esound, adding personalized esound entry to mainmenue
[neutrino] setRepeat: delay=25 period=25 use kernel-repeat: no
[drive_setup] Instance created
[neutrino] registering as event client
[scan-setup] received 19 sats
[CVideo::setVideoFormat] output format: 4:3(LB)
[camd] set emm caid 1702 capid 03e8
02:03:02.978 [timeThread] - 28.11.2012 15:32:41, tim: Wed Nov 28 15:32:41 2012
02:03:03.030 [timeThread] Time set via DVB(TDT), going to sleep for 5 seconds.
PES, queue 0 normal.
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
02:03:04.037 dmxSDT: going to sleep...
[camd] set emm caid 1702 capid 03e8
02:03:04.280 eit_set_update_filter, servicekey = 0x44100012ef4, current version
0x10 got events 3
[LCDFONT] FTC_Face_Requester (Fix12/SemiCondensed)
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 16:9)
[CVideo::setVideoFormat] output format: 16:9
[neutrino] timeset event. difference is 1354109377 s, stepping...
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[timerd] using config file /var/tuxbox/config/timerd.conf
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
15:33:09.071 getUTC(TOT): len=13 cc=DEU reg_id=0 pol=0 offs=0100 new=0200 when=S
un Mar 31 01:00:00 2013
15:33:09.119 [timeThread] - 28.11.2012 15:33:11, tim: Wed Nov 28 15:33:11 2012
[neutrino] timeset event. difference is 2 s, using adjtime(). oldd: 0 us
15:33:09.230 [timeThread] Time set via DVB(TOT), going to sleep for 1800 seconds
.
*** SWAP ***
[drive_setup] init drive setup 1.93
[drive setup] loadDriveSettings: load settings from /var/tuxbox/config/drivesetu
p.conf
[drive setup] getFileEntryString: error while open /var/etc/init.d/06hdd No such
file or directory
[samba setup] nmbd No such file or directory
[drive setup] formating...
[drive setup] unmount device...
[drive setup] creating partition...
The number of cylinders for this disk is set to 19457.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): Command action
e extended
p primary partition (1-4)
Partition number (1-4): No free sectors available
Command (m for help): 2: unknown command
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): 1: unknown command
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): Selected partition 1
Hex code (type L to list codes):
Command (m for help): 8: unknown command
Command action
a toggle a bootable flag
b edit bsd disklabel
c toggle the dos compatibility flag
d delete a partition
l list known partition types
m print this menu
n add a new partition
o create a new empty DOS partition table
p print the partition table
q quit without saving changes
s create a new empty Sun disklabel
t change a partition's system id
u change display/entry units
v verify the partition table
w write table to disk and exit
x extra functionality (experts only)
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
/dev/ide/host0/bus0/target0/lun0: p1
/dev/ide/host0/bus0/target0/lun0: p1
Syncing disks.
[drive setup] formating...
[drive setup] creating Filesystem, please wait...
SGI XFS with no debug enabled
[drive setup] mkFs: make filesystem failed /dev/ide/host0/bus0/target0/lun0/part
2 is not active!...
