Habe die Suite unter Gentoo kompiliert (0.4.1).
Wenn ich die Filme umwandeln will, kommt:
"ud_mux Abbruch !" ganz am Ende, wenn mplex schon (fast) fertig ist.
Code: Alles auswählen
INFO: [mplex] STREAM c2 completed @ frame 916.
INFO: [mplex] STREAM e2 completed @ frame 584.
INFO: [mplex] STREAM e1 completed @ frame 3222.
INFO: [mplex] STREAM c1 completed @ frame 5373.
INFO: [mplex] STREAM e0 completed @ frame 123375.
INFO: [mplex] STREAM c0 completed @ frame 205628.
INFO: [mplex] Multiplex completion at SCR=444186038.
INFO: [mplex] Video e0: buf= 3724 frame=205624 sector=01010988
INFO: [mplex] Video e1: buf= 0 frame=000031 sector=00023560
INFO: [mplex] Video e2: buf= 0 frame=205585 sector=00003574
INFO: [mplex] Audio c0: buf= 3456 frame=205628 sector=00058635
INFO: [mplex] Audio c1: buf= 0 frame=000031 sector=00001533
INFO: [mplex] Audio c2: buf= 0 frame=000000 sector=00000262
INFO: [mplex] VIDEO_STATISTICS: e0
INFO: [mplex] Video Stream length: 2036782612 bytes
INFO: [mplex] Sequence headers: 10282
INFO: [mplex] Sequence ends : 0
INFO: [mplex] No. Pictures : 123376
INFO: [mplex] No. Groups : 10282
INFO: [mplex] No. I Frames : 10282 avg. size 50684 bytes
INFO: [mplex] No. P Frames : 30845 avg. size 27466 bytes
INFO: [mplex] No. B Frames : 82250 avg. size 8126 bytes
INFO: [mplex] Average bit-rate : 3301600 bits/sec
INFO: [mplex] Peak bit-rate : 8776000 bits/sec
INFO: [mplex] BUFFERING min 15 Buf max 237180
INFO: [mplex] VIDEO_STATISTICS: e1
INFO: [mplex] Video Stream length: 47457136 bytes
INFO: [mplex] Sequence headers: 269
INFO: [mplex] Sequence ends : 0
INFO: [mplex] No. Pictures : 3223
INFO: [mplex] No. Groups : 269
INFO: [mplex] No. I Frames : 269 avg. size 48509 bytes
INFO: [mplex] No. P Frames : 809 avg. size 21175 bytes
INFO: [mplex] No. B Frames : 2146 avg. size 8040 bytes
INFO: [mplex] Average bit-rate : 2943600 bits/sec
INFO: [mplex] Peak bit-rate : 8804400 bits/sec
INFO: [mplex] BUFFERING min 16 Buf max 236613
INFO: [mplex] VIDEO_STATISTICS: e2
INFO: [mplex] Video Stream length: 7190256 bytes
INFO: [mplex] Sequence headers: 49
INFO: [mplex] Sequence ends : 0
INFO: [mplex] No. Pictures : 585
INFO: [mplex] No. Groups : 49
INFO: [mplex] No. I Frames : 49 avg. size 56407 bytes
INFO: [mplex] No. P Frames : 147 avg. size 16894 bytes
INFO: [mplex] No. B Frames : 390 avg. size 4965 bytes
INFO: [mplex] Average bit-rate : 2454000 bits/sec
INFO: [mplex] Peak bit-rate : 3879600 bits/sec
INFO: [mplex] BUFFERING min 34 Buf max 236913
INFO: [mplex] AUDIO_STATISTICS: c0
INFO: [mplex] Audio stream length 118442304 bytes.
INFO: [mplex] Syncwords : 205629
INFO: [mplex] Frames : 205629 padded
INFO: [mplex]
Danach kommt leider nichts, ich weiß nun auch nicht, wieso er abbricht...
Ich finde die Suite sehr gut, vor allem, dass alles über eine GUI machbar ist, ist sehr komfortabel.
Hoffe, dass mir jemand weiterhelfen kann.
//EDIT:
Habe den Aufruf mal in einer eigenen Bash gestartet, und siehe da. Es gibt eine Error Meldung:
Code: Alles auswählen
INFO: [mplex] Frames : 0 unpadded
INFO: [mplex] BUFFERING min 15 Buf max 2076
INFO: [mplex] AUDIO_STATISTICS: c1
INFO: [mplex] Audio stream length 3095424 bytes.
INFO: [mplex] Syncwords : 5374
INFO: [mplex] Frames : 5374 padded
INFO: [mplex] Frames : 0 unpadded
INFO: [mplex] BUFFERING min 15 Buf max 2076
INFO: [mplex] AUDIO_STATISTICS: c2
INFO: [mplex] Audio stream length 528192 bytes.
INFO: [mplex] Syncwords : 917
INFO: [mplex] Frames : 917 padded
INFO: [mplex] Frames : 0 unpadded
INFO: [mplex] BUFFERING min 15 Buf max 2076
**ERROR: [mplex] MUX STATUS: Frame data under-runs detected!
mplex failed: at /usr/bin/ud_mux.pl line 41.
Tobias