hab mir per BootManager yaqdd_ezap_pre auf die Box gebootet.
Das da noch ucode und avia fehlt ist klar, jedoch schaltet die Box in standby (nurnoch grüne LED).
Hier das Teminal-Log:
9debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-bc.bb.1c.07.00.00-28
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26218, &_data 0x26218, &_edata 0x29d08
debug: &_end 0x34894, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> 9debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-bc.bb.1c.07.00.00-28
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.136.100, My IP 192.168.136.3
debug: Sending TFTP-request for file C/dbox-boot/yadd2/tftpboot/ppcboot
will verify ELF image, start= 0x800000, size= 223043
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 9 2001 - 13:23:13)
Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-57-c5
FLASH: 8 MB
LCD driver (KS0713) initialized
LCD logo at: none
FB logo at: none
Input: serial
Output: serial
Images:
1: cdk
2: tiab
3: flash
4: test2
Select image (1-4), other keys to stop autoboot: 0
BOOTP broadcast 1
TFTP from server 192.168.136.100; our IP address is 192.168.136.3
Filename 'C/dbox-boot/yadd2/tftpboot/kernel-test2'.
Load address: 0x100000
Loading: #######################################################################
#############################################
## Booting Linux kernel at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 590063 Bytes = 576 kB = 0 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.2 (root@mpg) (gcc version 2.95.2 19991030 (2.95.3 prerelease/f
ranzo)) #11 Sun Jun 3 18:05:26 CEST 2001
Boot arguments: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.136.100:C/dbox-bo
ot/yadd2/test2root/
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.136.100:C/db
ox-boot/yadd2/test2root/
time_init: decrementer frequency = 251250000/60
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.56 BogoMIPS
Memory: 30508k available (1104k kernel code, 492k data, 64k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20184kB/6728kB, 64 slots per queue
eth0: CPM ENET Version 0.2, 00:50:9c:41:57:c5
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
JEDEC ID: 89 C5
0: offset=0x0,size=0x4000,blocks=8
1: offset=0x20000,size=0x20000,blocks=63
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 192.168.136.100, my address is 192.168.136.3
IP-Config: Guessing netmask 255.255.255.0
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Looking up port of RPC 100003/2 on 192.168.136.100
Looking up port of RPC 100005/2 on 192.168.136.100
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 64k in
Bummer, can't write to log on /dev/tty5!
console=/dev/console
init started: BusyBox v0.50 (2001.07.14-02:40+0000) multi-call bircS starting
Mounting /proc device
Mounting /var
Starting inetd
Setting hostname
ldconfig (disable me!)
Rebuilding ld.so.cache
Lade module
Lade i2c-8xx
/lib/modules/2.4.2/misc/soundcore.o: unresolved symbol request_module
i2c-core.o: i2c core module
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Lade info
i2c-core.o: driver FOR_PROBE_ONLY registered.
i2c-core.o: driver unregistered: FOR_PROBE_ONLY
mID: 01
feID: dd
fpID: 5a
enxID: ffffffff
gtxID: 0b
hwREV: 05
fpREV: 81
DEMOD: VES1893
Lade avs
type davor: 0
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [](pos. 0).
type: 0
ok init complete.devfs reg'd
Lade saa7126
i2c-core.o: driver i2c saa7126 driver registered.
i2c-core.o: client [i2c saa7126 chip] registered to adapter [](pos. 1).
Lade fp
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [](pos. 2
).
Lade avia
avia_core.c: do_firmread: Firmware wrong size '/ucodes/avia600.ux'.
/lib/modules/2.4.2/misc/avia.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade gtx_core
gtx-core.c: do_firmread: Unable to load '/ucodes/ucode.bin'.
/lib/modules/2.4.2/misc/gtx_core.o: init_module: Input/output error
Hint: insmod errors can be caused by incorrect module parameters, including inva
lid IO or IRQ parameters
Lade demux
Lade cam
der moment ist gekommen...
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [](pos. 3).
CAM: attached to adapter
Lade dmxdev
Lade dvbdev
Lade dvb
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wait
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_wr
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_command
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_rd
/lib/modules/2.4.2/misc/dvb.o: unresolved symbol avia_flush_pcr
Lade ves1893
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol register_demod
/lib/modules/2.4.2/misc/ves1893.o: unresolved symbol unregister_demod
Lade gtx_dmx
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol avia_set_pcr
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol unregister_demux
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol gtx_allocate_irq
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol gtx_get_reg
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol register_demux
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol gtx_get_mem
/lib/modules/2.4.2/misc/gtx_dmx.o: unresolved symbol gtx_free_irq
Lade gtx_fb
/lib/modules/2.4.2/misc/gtx_fb.o: unresolved symbol gtx_get_reg
/lib/modules/2.4.2/misc/gtx_fb.o: unresolved symbol gtx_get_mem
Setting up loopback device
starting ftpd
FTP4ALL 3.012, Copyright (C) 1996-2000 by Crescent (crescent@ftp4all.de)
This program is FREE SOFTWARE and distributed under GNU PUBLIC LICENSE
Server on host dbox is ready and listening on *:21
Base directory : /var/
Readme file : (none)
Permission file: .permissions
Errlog file : log/ftpd.err
Log file : log/ftpd.log
Log program : (none)
Server program : /sbin/ftps
/dev/fb/0: No such file or directory
framebuffer not available.
no framebuffer available
Sending SIGTERM to all processes.Sending SIGKILL to all processes.
The system is halted. Press CTRL-ALT-DEL or turn off power
System halt
Jedenfalls mußte ich noch ldconfig ins sbin kopieren, weil da wohl laut log noch was fehlte.
Was fehlt ausser den ucode und avia-files noch ?
Kann es sein, das laut Terminal-Log die cam-alpha.bin akzeptiert hat ?
Vielen Dank im voraus
Monitor456 <IMG SRC="/forum/images/smiles/icon_smile.gif">