Sagem Kabel 2x Intel

Beitrag von **PT-1** » Freitag 15. Juni 2007, 17:05

Hi,

habe hier einen Patienten..

Neues JtG Geflasht, schein fuer eine Weile auch ok. Behauptet aber im YWeb das es eine Nokia ist und findet trotz services&bouquets & Reload Services keine Sender.(ist dann im Radiomode

)

nach einen Neustart kommen ploetzlich die Sender im LCD (habe momentan keine Testmoeglichkeit)

Hier ein Teil des Logs:

Code: Alles auswählen

$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F68D8 XER: 20000000 LR: C38F6B1C SP: C1ADDD90 REGS: c1addce0 TRAP: 0200 
   Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1adc000[76] 'insmod' Last syscall: 128 
last math 00000000 last altivec 00000000
GPR00: C38F6B1C C1ADDD90 C1ADC000 00000080 00000000 C38FE000 C1CC8CEC FDFFE000 
GPR08: C1CC8D00 C38FE000 00000000 00000000 48008024 10073988 00000001 10050000 
GPR16: 00000001 10070000 1007ABA0 1007A858 00009032 C1ADDEA0 C1A32000 C3900000 
GPR24: C1CC8CA0 00000007 C38FC000 C01465C4 FFFFFFEA 00000000 C0150000 C38F6000 
Call backtrace: 
C38F6B1C C38F8964 C0010FF0 C000285C 1002261C 10003CBC 10003D38 
0FEB050C 00000000 
Bus error
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
a

Diese GRP Fehler kommen im Bootlog immer wieder

Code: Alles auswählen

Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F6098 XER: 20000000 LR: C38F6088 SP: C1515E10 REGS: c1515d60 TRAP: 0200 
   Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1514000[121] 'zapit' Last syscall: 54 
last math 00000000 last altivec 00000000
GPR00: 00000000 C1515E10 C1514000 00000001 000000E0 20006F06 00000000 C3B8C9E8 
GPR08: 00000000 C38FE000 C3900000 C0004BE0 84002028 10035444 00000000 00000000 
GPR16: 00000000 00000000 00000000 00000000 00009032 01515F40 C3B8C9E8 C17286D0 
GPR24: C151C5D0 00000001 00000000 00000000 000000E0 00000000 00000000 00000000 
Call backtrace: 
C003EC60 C3B8CEC0 C38D24E8 C38CD380 C0043EA8 C000285C 00000000 
10013824 100138F4 1000FF00 10012398 0FC9A50C 00000000

Beitrag von **PT-1** » Montag 18. Juni 2007, 10:39

Also,

Box bootet und zeigt an keine Sender gefunden und Service Scan ausfuehren. Sie bootet im Radio modus hat aber services.xml und bouquets.xml im richtigen Verzeichnis.

Code: Alles auswählen

[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[ConfigFile] Unable to open file /var/tuxbox/config/Y-Web.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/Y-Web.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/Y-Web.conf for reading.
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[sectionsd] getUTC: read: Connection timed out
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[neutrino] initialized everything
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 03
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-a3.ad.58.07.00.00-59
debug: HWrev 41  FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 162700
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (May  6 2007 - 21:31:13)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.0
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 694160 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    694096 Bytes = 677.8 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.34.4-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #2 So 6. Mai 21:39:42 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30780k available (1180k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:38:4e:2d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
 Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'lti-call
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan  1 12:00:00 CET 1970
route: SIOC[ADD|DEL]RT: Network is unreachable
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F68D8 XER: 20000000 LR: C38F6B1C SP: C19FFD90 REGS: c19ffce0 TRAP: 0200    Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c19fe000[78] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C38F6B1C C19FFD90 C19FE000 00000080 00000000 C38FE000 C1CC8C8C FDFFE000
GPR08: C1CC8CA0 C38FE000 00000000 00000000 48008024 10073988 00000001 10050000
GPR16: 00000001 10070000 1007ABA0 1007A858 00009032 C19FFEA0 C196C000 C3900000
GPR24: C1CC8C60 00000007 C38FC000 C01465C4 FFFFFFEA 00000000 C0150000 C38F6000
Call backtrace:
C38F6B1C C38F8964 C0010FF0 C000285C 1002261C 10003CBC 10003D38
0FEB050C 00000000
Bus error
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_av_core: Starting avia_gt_wdt thread.
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.237 2007/03/29 15:43:32 mws Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.395 2007/03/17 21:34:22 houdini Exp $
/tmp/currentservices.xml: No such file or directory
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F6098 XER: 20000000 LR: C38F6088 SP: C147BE10 REGS: c147bd60 TRAP: 0200    Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c147a000[124] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C147BE10 C147A000 00000001 000000E0 20006F06 00000000 C3B8C9E8
GPR08: 0FD5E580 C38FE000 C3900000 C0004BE0 84002028 10035444 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 0147BF40 C3B8C9E8 C1571AC0
GPR24: C14D1980 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003EC60 C3B8CEC0 C38D24E8 C38CD380 C0043EA8 C000285C 00000000
10013824 100138F4 1000FF00 10012398 0FC9A50C 00000000
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C38F6098 XER: 00000000 LR: C38F6088 SP: C145FDB0 REGS: c145fd00 TRAP: 0200    Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c145e000[131] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C145FDB0 C145E000 00000001 000003B0 C145FE14 C145FE50 C3B8C35C
GPR08: 00000000 C38FE000 C3900000 C0004BE0 84002028 1002122C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 0145FF40 C3B8C35C C1437270
GPR24: C144E7D0 00000002 00000000 C145FE14 000003B0 00000000 7FFFFD00 C145FE50
Call backtrace:
C145FE00 C38F8750 C3B8C68C C38D25C8 C38CD380 C0043EA8 C000285C
3000A6A8 10006480 10006C50 10005F50 0FC4650C 00000000
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by /bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[section

Beitrag von **Gorcon** » Montag 18. Juni 2007, 11:18

Ein sehr ähnliches Log gabs hier schonmal.

Gruß Gorcon

Beitrag von **JtG-Riker** » Montag 18. Juni 2007, 16:25

Würd ma auf AVIA oder CPU tippen, beim Kernel OOPS aber eher CPU

Gruß Riker

Beitrag von **PT-1** » Dienstag 19. Juni 2007, 20:03

Habe mal in meinem Bastellager aufgeraeumt und diese 1x Intel Sagem Box noch gefunden.

Bootlog:

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2  mID 03
debug: feID 00    enxID 03
debug: fpID 52     dsID 01-0f.e1.a5.07.00.00-5c
debug: HWrev 61  FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 162700
verify sig: 262
Branching to 0x40000


U-Boot 1.2.0 (Tuxbox) (May  6 2007 - 21:31:13)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
Scanning JFFS2 FS: . done.
FB:    ready
LCD:   ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET

Options:
  1: Console on null
  2: Console on ttyS0
  3: Console on framebuffer
Select option (1-3), other keys to stop autoboot:  0 
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 704080 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
   Image Name:   dbox2
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    704016 Bytes = 687.5 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
Linux version 2.4.34.4-dbox2 (vom Jtg-Team)  (gcc version 3.4.6) #1 Mi 30. Mai 2
0:58:20 CEST 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30760k available (1200k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3a:a8:ad
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.6.0 (2007-06-07 23:45:40 CEST) multi-call binary
Starting the automounter
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Thu Jan  1 12:00:00 CET 1970
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.7 2006/08/01 22:04:55 jtgriker Exp $
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: registering frontend 0:0 (Atmel AT76C651A with TUA6010XS)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.243 2007/06/14 21:20:00 houdini Exp $
[sectionsd] Caching max 6000 events
[sectionsd] Caching 14 days
[sectionsd] Caching 6 hours Extended Text
[sectionsd] Events are old 60min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.397 2007/06/10 19:36:49 houdini Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
[frontend] uncommitted_switch_mode 0
/var/tuxbox/config/zapit/services.xml: No such file or directory
[camd] ca system id: 1702
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $

[controld] Boxtype detected: (3, Sagem D-BOX2)
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
[yhttpd] Webserver nhttpd/3.1.3 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...[camd] a card is in slot #2
[camd] a card is in slot #1
OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[yhttpd] Webserver starting...
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by
 /bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out

Screenshot mit YWeb, menu sieht auf dem TV aehnlich aus ...

Bild

Beitrag von **SoLaLa** » Dienstag 19. Juni 2007, 21:41

eNX put... oder das RAM