Ich habe mir eine DBox2 Sagem Kabel 1xI über Ebay ersteigert.
Die DBOX hatte von Anfang an kein Empfang. Aktuelles YADI-Image raufgespielt und immer noch kein Empfang, Kanalsuche erfolglos.
Ich bin nicht grad der Hardwareprofi deshalb bitte ich euch um Hilfe. Aktuelles Bootlog habe ich erstellt.
Code: Alles auswählen
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS Point: 00000000
### FS load complete: 669451 bytes loaded to 0x100000
Verifying Che
debug: Got Block #0040
U
BOOTP/TFTPa Size:
FB: readyder (v0.3)B
LCD: ready
Lo
In: serial000000
debug:
Out: serialBOOTP request0000
Err: serialng Checksum .
Net: SCC ETHERNET
Un
debuessi
Options:p BOOTP/. OK
1: Console on null
debug: DDF: Cal
2: Console on ttyS0debug: DDF: 66.76 Bog
Flash-FS bo
3: Console on framebuffer
debug: B
Select option (1-3), other keys to stop autoboot: 0 enxID 03
debug: fpID 5
Found file /root/platfor
Entry Point: 00000000rial
Err:
Verifying Checksum ... OKC ETHERNETot
boot
Uncompressing Kernel Image ... OKulltstrap loader (v1.5)
2: Console
Found Flas
ódebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPSound file /root/platform/sagem-dbox2/kernel/os in Flash-FS
Select option (1-3), other keys to stop autob
debug: Got Block #0040
debug: BMon V1.2 mID 03mage, start= 0x800000, s
debug: feID 00 enxID 03) loading 'vmlinuz' to 0x1
verify sig: 262
Branching
debug: fpID 52 dsID 01-60.7
U-Boot 1.2.0 (Tuxbox) (Apr 10
debug: Given up BOOTP/
DRAM: 32 MB
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS Point: 00000000
FB: ready
LCD: ready
In: serial
Verifying Che
Er
debug: Got Block #0040
Net: SCC ETHERNET
U
will verify ELF image, start= 0x800000, size= 162920
2: Console on ttyS0
÷debug: DDF: Calibrating delay loop..
Select option
verify sig: 262.76 BogoMIPStoboot: 0
Branching to 0x40000
### F
U-Boot 1.2.0 (Tuxbox) (Apr 10 2007 - 2ID 03
LCD: readyomplete: 669
In: serialed to 0x10000
Out: serial
Err: serial
Net: SCC ETHERNET
Entry Point: 00000000
Un-Protected 63 sectors. OK
## Booting image at 00100000 ... Image ... OK
Image Name: dbox2g: DDF: Calibrating de
Image Type: PowerPC Linux Kernel Image (gzip compressed)
debug: BMon V1.2 m
Data Size: 669387 Bytes = 653.7 kB 00 enxID 03
Load Address: 0000000001-60.7
debug: Transmitting BOOTP request via
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03OTP/TFTP boot
debug: fpID 52 dsID 01-60.7f.d1.07.00.00-08
Flash-FS bootstrap loader (v1.5)
debug: HWrev 61 FPrev 0.23Flash-FS superblock version
debug: B/Ex/Fl(MB) 32/00/08
Found file /r
WATCHDOG reset enabled2/kernel/os in Flash-F
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)Block #0040
debug:erify
debug: Transmitting BOOTP request via broadcast
ve
debug: Given up BOOTP/TFTP bootnching to 0x40000
boot net failed1.2.0 (Tuxbox)
Flash-FS bootstrap loader
S
verify sig: 2621 kB D-Cache
verify sig: 262ng to 0
Branching to 0x40000.2 mID 03fy sig: 26
U-Boot 1.2.0 (Tuxbox) (Apr 10 2007 - 22:55:24)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
I2C: r
debug: feID 00 enxID 03MB
Board: DBOX2, Sagem, BMon V1.2
C
U-Boot823ZTni
Watchdog enabled
debug: fpID
I2C: ready01-60.7f.d1.
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. done., Sa
debug:
FB: readyrev 0.23I-Ca
LCD: readyche Watch
In: serial
Out: serial
Err: serial
I2
Net: SCC ETH
### FS load complete: 669451 bytes loaded to 0x100000eady
LCD: ready
In: seri
.............................................................
Net: SCC ETHERNET
Options:
1: Conso
Un-Protected 63 sectors
2: Console on
## Booting image at 00100000 ...onsole on framebuffer
Image Name: dbox2 option (1-3), other k
Image Type: PowerPC Linux Kernel Image (gzip compressed)
### FS (squashfs) loading 'vmlinuz' to 0x100
Data Size: 669387 Bytes = 653.7 kB
### FS load complete: 669451 bytes loa
Load Address: 00000000
dbox2:root> debug:mage
BOOTP/TFTP bootstrap loader (v0.3)ating delay loop... debug: DDF: 66
debug:oMIPS
debug: Transmitting BOOTP request via broadcast
debug: BMon V1.2 mID 03
debug: Given up BOOTP/TFTP boot0 enxID 03
boot net failedfpID 52 dsI
Flash-FS bootstrap loader
will verify ELF image, start= 0x800000, size= 162920 BOOTP request via broadcast
verify sig: 262
debug:
Branching to 0x40000oot
U-Boot 1.2.0 (Tuxbox) (Apr 10 2007 - 22:55:24)ash-FS bootstrap loader (v1.5)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Found file /root/plat
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabledock
I2C: readyl verify ELF
DRAM: 32 MB= 0x800000,
FLASH: 8 MB
Scanning JFFS2 FS: .. done.
verify sig: 26
FB: ready
Branching t
LCD: ready
In: serial1.2.0 (Tuxbox
Out: serial - 22:55:24)
Err: serial
Net: SCC ETH
FB:
### FS load complete: 669451 bytes loaded to 0x100000rial
Out: serial
Err: s
............................................................... done
1: Console on null
2: Console on ttyS
Un-Protected 63 sectors 3: Console on framebuf
## Booting image at 00100000 ...lect option (1-3), ot
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)to 0x100000
##
Data Size: 669387 Bytes = 653.7 kBo 0x100000
Load Address: 00000000
debug: feID 00 enxID 03g: B/Ex/Fl(MB) 32/00/08
debug: fpID 52 dsID 01-60.7f.d1.07.00.00-08
dbox2:root> de
Load Ad
debug: HWrev 61 FPrev 0.23trap loader
Entry Point
debug: B/Ex/Fl(MB) 32/00/08bug:
Verifying Check
WATCHDOG reset enabledroadcast
Unc
dbox2:root> debug:mage ... OK
deb
BOOTP/TFTP bootstrap loader (v0.3)g: DDF: Ca
debug:DDF: 6
debug: Transmitting BOOTP request via broadcast
Fo
debug: BMon V1.2
debug: Given up BOOTP/TFTP boot
debug: feID 00 enxID 03nd f
boot net failedrm/sag
debug: f
Flash-FS bootstrap loader
Branching to 0x40000oot) 32/00/08
U-Boot 1.2.0 (Tuxbox) (Apr 10 2007 - 22:55:24)ash-FS bootstrap loader (v1.5)ebug:atchdog ena
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache 32 MB
debug:: 8 M
de
Found file /root/plat
Board: DBOX2, Sagem, BMon V1.2lash-FS
FB: ready
Watchdog enabledp BOOTP/TFTP
debug: Got
I2C: ready
DRAM: 32 MBll verify EL
FLASH: 8 MBt= 0x800000,
Scanning JFFS2 FS: .. done.
Found
FB: readyrify sig: 26
LCD: ready
Branchin
In: serial
Found fi
Out: serial 1.2.0 (Tuxbo
Err: serial7 - 2
Net: SCC ETH
Verifying Checksum ... OK
##
Uncompressing Kernel Image ... OKected 63 sectors
÷debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPSx1
Image Name: dbox2
Image Type:
debug: BMon V1.2 mID 03e (gzip compressed).....
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-60.7f.d1.07.00.00-08ectors
## Boo
Load Ad
debug: HWrev 61 FPrev 0.23
Entry Point
debug: B/Ex/Fl(MB) 32/00/08
Verifying Check
WATCHDOG reset enabledage (gzip compr
Unc
dbox2:root> debug:mage ... OK
BOOTP/TFTP bootstrap loader (v0.3)g: DDF: Calibrating delay loop...
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 162920
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Apr 10 2007 - 22:5
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
ódebug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-60.7f.d1.07.00.00-08
debug: HWrev 61 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 162920
verify sig: 262
Branching to 0x40000
U-Boot 1.2.0 (Tuxbox) (Mar 17 2007 - 16:51:08)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 698384 bytes loaded to 0x100000
............................................................... done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 698320 Bytes = 682 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.34-dbox2 (ImageTeam@yadi.org) (gcc version 3.4.4) #2 Sa 17. MÃ
¤r 17:21:55 CET 2007
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 roo
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30772k available (1188k kernel code, 348k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module versi
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:3c:9d:6d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2007.03.17-16:04+0000) multi-call event: $Id: eve
nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Detected STB:
Vendor: Sagem
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Thu Jan 1 01:00:00 CET 1970
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $ serial
I2C:
Out: serial
DRAM: 3
avia_gt_core: autodetecting chip type... eNX
Net: SCC ETHERNETing JFFS2 FS: .. do
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $n nulleady
LCD
2: Console on ttyS0In:
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
Err: serial
Select option (1-3),
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
1: Console on null
### FS (squashfs)
avia_gt_ucode: loaded ucode v0013 on framebuffer
avia_gt_ucode: ucode section filters enabled.
### FS load complete: 669451 bytes loaded
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning.........................................z' t
will verify ELF image, start= 0x
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)6ion 3.1
Branching to 0x40000
avia_gt_gv: set_input_mode (mode=2)
U-Boot 1.2.0 (Tuxbox) (Apr
avia_gt_gv: set_input_size (width=720, height=576)
CPU: PPC823ZTnnB2 at 66 MHz: 2 k
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)ze= 162920
Console: switching to colour frame buffer device 82x32
Err: serial2.0 (Tuxbox)
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer devicele
1: Console on null
I
lcd.o: init lcd driver module 2: Console on ttyS0
lcd.o: found KS0713/SED153X lcd inteConsole on frame
Networkcfg eth0: 192.168.1.20/255.255.255.0 gw 192.168.1.1 ns 192.168.1.1
debug: Given up BOOTP/TFTP bootg 'vmlinuz' to 0x100
Startmode: Bootmenu - HWS: on
÷debug: DDF: Calibrating
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.236 2007/02/
BOOTP/TF
25 20:51:52 guenther Exp $rblock version 3.1AM: 32
[sectionsd] Caching max 5000 events
Uncompressing Kern
[sectionsd] Caching 14 days
debug:: 8 M
[sectionsd] Events are old 60min after their end timeos in Flash-FSogoMIPS
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory BMon
debug: Given up BOOTP/TFT
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold): 00000000: ready
LC
Eread
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
debug: feID 00 enxID 03rial
Ne
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
