ich hab auf meiner dbox linux und das lief über 2 wochen wunderbar. aber jetzt bleibt die box manchmal beim starten hängen. im bootlog erhalte ich in diesen fällen folgende ausgabe:
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2f.85.87.07.00.00-93
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2f.85.87.07.00.00-93
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2f.85.87.07.00.00-93
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2f.85.87.07.00.00-93
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2f.85.87.07.00.00-93
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 155204
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Aug 31 2006 - 20:09:02)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.1
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 696900 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 696836 Bytes = 680.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... Bad Data CRC
=> Bus Fault @ 0x01feb6e0, fixup 0x00000000
Machine check in kernel mode.
Caused by (fromBus Fault @ 0x01feb644, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01facaa8 Unknown values in msr
NIP: 01FEB644 XER: 20000000 LR: 01FEB640 REGS: 01facaa8 TRAP: 0200 DAR: 656631B4
MSR: 00001002 EE: 0 PR: 0Bus Fault @ 0x01feb644, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01fac778 Unknown values in msr
NIP: 01FEB644 XER: 20000000 LR: 01FEB640 REGS: 01fac778 TRAP: 0200 DAR: 01F91000
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 01FEB640 01FAC868 00000000 FF000000 01FAC940 00000010 FFFFFFFE 00000000
GPR08: 00000001 FF002811 FFFFFFFF FF0011C8 00000000 000328A4 01FFBD00 01F91000
GPR16: 00000000 01FF63B4 007FFF00 01FACD98 00001002 01FACA98 00000000 01FD309C
GPR24: 01FD3650 01FAD014 00000003 00000032 00100030 01FACF94 01FFC8BC FF102808
Call backtrace:
01FEB640 01FEB684 01FE6160 01FE430C 01FE446C 01FE44EC 01FD357C
01FD371C 01FD309C 01FEB640 01FEB684 01FE6160 01FE430C 01FE446C
01FE44EC 01FD369C 01FD309C 01FEB6E0 01FE6000 01FE41F8 01FE43BC
01FDDE2C 01FDE6A4 01FD9E24 01FDBus Fault @ 0x01feb644, fixup 0x00000000
Machine check in kernel mode.
Caused by (from msr): regs 01fac440 Unknown values in msr
NIP: 01FEB644 XER: 20000000 LR: 01FEB640 REGS: 01fac440 TRAP: 0200 DAR: 13D3473D
MSR: 00001002 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
GPR00: 01FEB640 01FAC530 00000000 FF000000 01FAC608 00000010 FFFFFFFE 00000006
GPR08: 00000041 FF002811 FFFFFFFF FF0011C8 00000000 000328A4 01FFBD00 01F91000
GPR16: 00000000 01FF63B4 007FFF00 01FACD98 00001002 01FAC768 00000000 01FD309C
GPR24: 01FD3650 01FAD014 00000003 01FD33B0 00000033 01FACF94 01FFC8BC FF102808
Call backtrace:
01FEB640 01FEB684 01FE6160 01FE430C 01FE446C 01FE44EC 01FD34E4
01FD3724 01FD309C 01FEB640 01FEB684 01FE6160 01FE430C 01FE446C
01FE44EC 01FD357C 01FD371C 01FD309C 01FEB640 01FEB684 01FE6160
01FE430C 01FE446C 01FE44EC 01FD369C 01FD309C 01FEB6E0 01FE6000
01FE41F8 01FE43BC 01FDDE2C 01FDE6A4 01FD9E24
machine check
debug: DDF: Calibrating delay loop... debug: DDF: 65.33 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-2f.85.87.07.00.00-93
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
wie man sieht, hab ich mehrere startversuche unternommen, doch sie bleibt öfters hängen, dann hab ich sie resettet.
wäre toll, wenn mir jemand helfen könnte.
dbox startet nur manchmal
-
- Neugieriger
- Beiträge: 6
- Registriert: Sonntag 25. März 2007, 13:11
-
- Erleuchteter
- Beiträge: 710
- Registriert: Dienstag 3. September 2002, 12:54