BER 0%
SNR 83%
SIG 55%
NICHT BILD FEHLER
VOILA BOOTLOG
XMLMount=/mnt/epg/
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> usin
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[sectionsd] getUTC: read: Connection timed out
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[neutrino] received 2 sats
[neutrino] registering as event
[neutrino] Pruefe auf Install Wizzard
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] initialized everything
[remotecontrol.cpp] Kein EPG 2!
[basicsocket] receive timed out.
[CBasicClient] receive failed: /
[remotecontrol.cpp] Kein EPG 2!
[basicsocket] send_data: Broken pipe
zap failed!
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[sectionsd] getUTC: read: Connection timed out
zap failed!
[sectionsd] getUTC: read: Connection timed out
0 12460500 12460929
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!
/debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.2 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-80.43.be.07.00.00-8e
debug: HWrev 21 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 162920
verify sig: 262
Branching to 0x40000
U-Boot 1.1.6 (Tuxbox) (Nov 16 2006 - 19:32:15)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ...
. FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 787062 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 786998 Bytes = 768.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.33-dbox2 (sportster@linux) (gcc version 3.4.4) #91 Do Nov 16 1
9:33:57 CET 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30556k available (1348k kernel code, 404k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2,
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:31:f8:3f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00480000 : "root (squashfs)"
0x00480000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.2.1 (2006.11.01-21:46+0000) multi-call event: $Id: eve
nt.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Vendor: Sagem
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_av_core: Starting avia_gt_wdt thread.
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour f
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
[cdkVcInfo.cpp] cdkVcInfo,v1.07 25.09.2006 17:50.00 fernsehass
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
[chkucodes.cpp] v 1.0 19.01.2006 02:18.00 fernsehass
Please press Enter to activate this console. Thu Jan 1 01:00:00 CET 1970
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
[zapit] PMT update enabled
[frontend.cpp:CFrontend:51] /dev/dvb/adapter0/frontend0: No such file or directo
ry
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 41E onid 1
[getservices] dup transponder id 420 onid 1
[getservices] dup transponder id 421 onid 1
[getservices] dup transponder id 423 onid 1
[getservices] dup transponder id 424 onid 1
[getservices] dup transponder id 427 onid 1
[getservices] dup transponder id 40A onid 1
[getservices] dup transponder id 40E onid 1
[getservices] dup transponder id 412 onid 1
[getservices] dup transponder id 416 onid 1
[getservices] dup transponder id 3F0 onid 1
[getservices] dup transponder id 4
[getservices] dup transponder id 407 onid 1
[getservices] dup transponder id 408 onid 1
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 42A onid 1
[getservices] dup transponder id 11 onid 85
[getservices] dup transponder id 42C onid 1
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 42E onid 1
[getservices] dup transponder id 430 onid 1
[getservices] dup transponder id 432 onid 1
[getservices] dup transponder id 434 onid 1
[getservices] dup transponder id 436
[getservices] dup transponder id 4FF onid 1
[getservices] dup transponder id 438 onid 1
[getservices] dup transponder id 4 onid 85
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 7 onid 85
[getservices] dup transponder id 442 onid 1
[getservices] dup transponder id 443 onid 1
[getservices] dup transponder id 444 onid 1
[getservices] dup transponder id 446 onid 1
[getservices] dup transponder id 447 onid 1
[getservices] dup transponder id 448 onid 1
[getservices] dup transponder id 449
[getservices] dup transponder id 44B onid 1
[getservices] dup transponder id 44C onid 1
[getservices] dup transponder id 451 onid 35
[getservices] dup transponder id 454 onid 1
[getservices] dup transponder id 455 onid 35
[getservices] dup transponder id 456 onid 1
[getservices] dup transponder id 458 onid 1
[getservices] dup transponder id 45A onid 1
[getservices] dup transponder id 2AF8 onid 13E
[getservices] dup transponder id 2D50 onid B0
[getservices] dup transponder id 2E18 onid B0
[getservices] dup transpo
[getservices] dup transponder id 2EE0 onid B0
[getservices] dup transponder id 2F44 onid 13E
[getservices] dup transponder id 2FA8 onid 13E
[getservices] dup transponder id 3138 onid B0
[getservices] dup transponder id 190 onid 13E
[getservices] dup transponder id 385 onid 110
[getservices] dup transponder id 389 onid 110
[getservices] dup transponder id 5DC onid 13E
[getservices] dup transponder id 708 onid 13E
[getservices] dup transponder id 3DB8 onid B0
[getservices] dup transponder id 157C onid 13E
[getservices] dup transponder id 1644 onid FBFF
[getservices] dup transponder id 170C onid FBFF
[getservices] dup transponder id 17D4 onid 13E
[getservices] dup transponder id 1838 onid FBFF
[getservices] dup transponder id 189C onid FBFF
[getservices] dup transponder id 19C8 onid FBFF
[getservices] dup transponder id 1A2C onid FBFF
[getservices] dup transponder id 1C84 onid 13E
[getservices] dup transponder id 1CE8 onid 71
[getservices] dup transponder id 1E14 onid 13E
[getservices] dup transponder id 1EDC onid
[getservices] dup transponder id 2328 onid 13E
[getservices] dup transponder id 24B8 onid 13E
[getservices] dup transponder id 2774 onid FBFF
/tmp/currentservices.xml: No such file or directory
$Id: sectionsd.cpp,v 1.230 2006/11/14 20:36:30 houdini Exp $
[sectionsd] ================= NTP Server =======================
[sectionsd] Modus(DVB=0,NTP=1,RTC=2) : 0
[sectionsd] NTP Server : time.fu-berlin.de
[sectionsd] Aktualisierung aller : 1800 sekunden // 30 minuten
[sectionsd] ================= EPG Cac
[sectionsd] Cache max 3000 events
[sectionsd] Cache 3 tag(e)
[sectionsd] Events 180 min nach ende alt
[sectionsd] ================== Sectionsd =======================
[sectionsd] Sectionsd Scan : 1
[sectionsd] Epg.xml speichern ? : 0
[sectionsd] Mountpunkt : /mnt/epg/
[sectionsd] ====================================================
$Id: controld.cpp,v 1.125 2006/09/24 09:17:10 barf Exp $
[controld] Boxtype detected: (3, Sagem D-BOX2)
[yhttpd] Webserver nhttpd/3.0.6 (yhttpd_core/1.1.2)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
DBox2 Multicam Driver v1.01 skars & doz21
[controld]: ROUTEVIDEO v1 = 0 a1 = 0 v2 = 0 a2 = 0 fblk=1
############## Multicam-Treiber geladen #################
Debug.camd2=0
Infos.camd2=0
warte auf camd2 (max. 5 Sekunden)
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[neutrino] Sportster-Neutrino wird gestartet