make yadd-neutrino
ein YADD erstellt. Dann habe ich die Ordner tftpboot und cdkroot auf eine andere Linux-Kiste (ebenfalls Debian 3.1 mit Kernel 2.6.x) in den gleichnamigen Ordner wie beim Build (/home/vmware/dbox2) kopiert.
Ucodes hab ich nach /home/vmware/dbox2/cdkroot/var/tuxbox/ucodes kopiert und Logos nach /home/vmware/dbox2/tftpboot.
Da er das so zu verlangen schien, hab ich cdkroot in yaddroot und kernel-cdk in kernel-yadd umbenannt.
Aber egal wie ich es versuche, er kommt immer nur bis
Code: Alles auswählen
Uncompressing Kernel Image ... OKAnbei meine Config und der boot log (statt 00:50:9c:xx:xx:xx steht dort natürlich die richtige MAC-Adresse)
/etc/ethers
Code: Alles auswählen
00:50:9c:xx:xx:xx 192.168.2.212Code: Alles auswählen
# /etc/exports: the access control list for filesystems which may be exported
# to NFS clients. See exports(5).
/home/vmware/dbox2/yaddroot dbox(rw,no_root_squash,sync)
Code: Alles auswählen
127.0.0.1 localhost.localdomain localhost
192.168.2.3 SCPMMSRV.scpdom.local SCPMMSRV
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
192.168.2.212 dbox
Code: Alles auswählen
tftp dgram udp wait root /usr/sbin/tcpd in.tftpd /home/vmware/dbox2/tftpbootCode: Alles auswählen
#
# Sample configuration file for ISC dhcpd for Debian
#
# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
#
# The ddns-updates-style parameter controls whether or not the server will
# attempt to do a DNS update when a lease is confirmed. We default to the
# behavior of the version 2 packages ('none', since DHCP v2 didn't
# have support for DDNS.)
ddns-updates off;
ddns-update-style none;
# option definitions common to all supported networks...
option domain-name "scpdom.local";
option domain-name-servers 192.168.2.3;
option subnet-mask 255.255.255.0;
default-lease-time 600;
max-lease-time 7200;
authoritative;
subnet 192.168.2.0 netmask 255.255.255.0 {
use-host-decl-names on;
range 192.168.2.200 192.168.2.220;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.2.255;
option routers 192.168.2.1;
}
host dbox {
hardware ethernet 00:50:9C:xx:xx:xx;
fixed-address 192.168.2.212;
allow bootp;
server-name "192.168.2.3";
#filename "/home/vmware/dbox2/tftpboot/ppcboot";
if exists vendor-class-identifier {
filename "kernel-yadd";
} else {
filename "u-boot";
}
option root-path "/home/vmware/dbox2/yaddroot";
}Code: Alles auswählen
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-1d.b3.27.07.00.00-a1
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Unknown RFC1048-tag debug: 3 debug: 4 debug: c0 debug: a8 debug: 2 debug: 1 debug:
debug: Unknown RFC1048-tag debug: 6 debug: 4 debug: c0 debug: a8 debug: 2 debug: 3 debug:
debug: Unknown RFC1048-tag debug: 11 debug: 1b debug: 2f debug: 68 debug: 6f debug: 6d debug: 65 debug: 2f debug: 76 debug: 6d debug: 77 debug: 61 debug: 72 debug: 65 debug: 2f debug: 64 debug: 62 debug: 6f debug: 78 debug: 32 debug: 2f debug: 79 debug: 61 debug: 64 debug: 64 debug: 72 debug: 6f debug: 6f debug: 74 debug:
debug: Unknown RFC1048-tag debug: 1c debug: 4 debug: c0 debug: a8 debug: 2 debug: ff debug:
debug: Got BOOTP reply from Server IP 192.168.2.3, My IP 192.168.2.212
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 137924
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Oct 27 2006 - 15:18:01)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
DHCP client bound to address 192.168.2.212
Using SCC ETHERNET device
TFTP from server 192.168.2.3; our IP address is 192.168.2.212
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
File transfer via NFS from server 192.168.2.3; our IP address is 192.168.2.212
Filename '/home/vmware/dbox2/yaddroot/var/tuxbox/boot/boot.conf'.
Load address: 0x100000
Loading: #
done
Bytes transferred = 14 (e hex)
BOOTP broadcast 1
DHCP client bound to address 192.168.2.212
Using SCC ETHERNET device
TFTP from server 192.168.2.3; our IP address is 192.168.2.212
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.3; our IP address is 192.168.2.212
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
DHCP client bound to address 192.168.2.212
Using SCC ETHERNET device
TFTP from server 192.168.2.3; our IP address is 192.168.2.212
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.3; our IP address is 192.168.2.212
Filename 'logo-fb'.
Load address: 0x100000
Loading: ###
done
Bytes transferred = 12737 (31c1 hex)
Options:
1: console on ttyS0
2: console on fb0
3: console on null
Select option (1-3), other keys to stop autoboot: 0
BOOTP broadcast 1
DHCP client bound to address 192.168.2.212
Using SCC ETHERNET device
TFTP from server 192.168.2.3; our IP address is 192.168.2.212
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.3; our IP address is 192.168.2.212
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: #################################################################
#################################################################
##############################
done
Bytes transferred = 817551 (c798f hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 817487 Bytes = 798.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK