Hallo zusammen,
nachdem ich meine Nokiabox 2x Avia 500 im Zuge des IDE-IF-Einbaus jetzt unzählige Male zerlegt habe, ist das Teil (die Box) offenbar hopps gegangen. Im Display wird im Deep-Standby zwar noch der grüne Punkt angezeigt, nach dem Einschalten bleibt das Display aber schwarz.
Die Box bootet Neutrino, bringt aber die Fehlermeldung, dass keine Sender verfügbar sind -> Kanalsuche. In der Kanalsuche wird mir nur die Option auf Astra nach Sendern zu suchen angeboten, obwohl es eine Kabelbox ist. Die Box ist ansonsten ohne Probleme bedienbar.
Gestern wollte ich dann versuchsweise über Internet das JTG-Komplettimage 2.2 flashen. Lt. Bildschirmanzeige wurde das Image heruntergeladen, der Flash gelöscht und dann programmiert - die Box ist aber unverändert (UCodes noch vorhanden etc.)
Die Box dürfte hinüber sein, oder ?
Gruß
Manfred
Kabelbox sucht Sender auf SAT
-
ManfredK2
- Einsteiger
- Beiträge: 107
- Registriert: Freitag 25. März 2005, 20:14
-
MB
- Erleuchteter
- Beiträge: 499
- Registriert: Sonntag 16. Juni 2002, 15:47
Re: Kabelbox sucht Sender auf SAT
Das update wurde gemacht, es wird aber nur ein Teil überschrieben, ucodes bleiben erhaltenManfredK2 hat geschrieben:die Box ist aber unverändert (UCodes noch vorhanden etc.)
Die Box dürfte hinüber sein, oder ?
Gruß
Manfred
Vieleicht mal ein Bootlog anhängen, dann könnten die Spezis sicher mehr sagen als ihre Kristalkugel zu befragen.
Grüße und so
Philips Sat
Astra 19,2°
& (über 4/1 Diseqc 2.0)
Eutelsat 13°
Astra 19,2°
& (über 4/1 Diseqc 2.0)
Eutelsat 13°
-
ManfredK2
- Einsteiger
- Beiträge: 107
- Registriert: Freitag 25. März 2005, 20:14
Hier ist mal das aktuelle Bootlog:
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - \ |
.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 759063 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 758999 Bytes = 741.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #3 Mo Aug 7 20:59:49 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30644k available (1296k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:13:f7:60
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.1.3 (2006.08.07-18:48+0000) multi-call
Starting pid 10, console /dev/console: '/etc/init.d/rcS'
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: c38aa000
dboxide: probing dbox2 IDE CPLD: walking bit test failed: fffffffe != fbffffdc
dboxide: not a valid dbox2 IDE CPLD detected
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory
hdparm: Can't stat '/dev/ide/host0/bus0/target0/lun0/disc': No such file or directory
Thu Jan 1 12:00:00 CET 1970
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C39188D8 XER: 20000000 LR: C3918B1C SP: C1BE7D90 REGS: c1be7ce0 TRAP: 0200 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1be6000[81] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C3918B1C C1BE7D90 C1BE6000 00000080 00000000 C3920000 C1E5AC2C FDFFE000
GPR08: C1E5AC40 C3920000 00000000 00000000 48008024 100AB69C 00000001 10080000
GPR16: 00000001 100A0000 100B3740 100B33F8 00009032 C1BE7EA0 C1B76000 C3920000
GPR24: C1E5ABE0 00000007 C391E000 C01675C8 FFFFFFEA 00000000 C0170000 C3918000
Call backtrace:
C3918B1C C391A964 C0010FF4 C000285C 10026D18 10003FCC 10004048
0FEC3DBC 00000000
Bus error
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 3000 events
[sectionsd] Caching 3 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C3918098 XER: 20000000 LR: C3918088 SP: C169DE10 REGS: c169dd60 TRAP: 0200 Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c169c000[121] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C169DE10 C169C000 00000001 000000E0 20006F06 00000000 C3BAE9E8
GPR08: 00000000 C3920000 C3920000 C0004BE0 84002028 1003463C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 0169DF40 C3BAE9E8 C17206D0
GPR24: C1682090 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003D9D0 C3BAEEC0 C38F44E8 C38EF380 C0042B64 C000285C 00000000
10012E18 10012EE8 1000F3F0 1001198C 0FCB7DBC 00000000
[camd] ca system id: 1722
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C3918098 XER: 00000000 LR: C3918088 SP: C1675DB0 REGS: c1675d00 TRAP: 0200 Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1674000[127] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C1675DB0 C1674000 00000001 000003B0 C1675E14 C1675E50 C3BAE35C
GPR08: 00000000 C3920000 C3920000 C0004BE0 84002028 1002122C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01675F40 C3BAE35C C1720C80
GPR24: C16769B0 00000002 00000000 C1675E14 000003B0 00000000 7FFFFD60 C1675E50
Call backtrace:
C1675DB4 C391A750 C3BAE68C C38F45C8 C38EF380 C0042B64 C000285C
7FFFFDB0 1000618C 1000695C 10005C5C 0FC64DBC 00000000
[camd] no card is in slot #2
[camd] no card is in slot #1
[nhttpd] Neutrino HTTP-Server starting..
clear failed: Device or resource busy
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by /bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[deutsch.locale] missing entry: moviebrowser.edit_book_name_info2
[deutsch.locale] missing entry: moviebrowser.edit_book_pos_info2
[deutsch.locale] has 2 missing entrys
clear failed: Device or resource busy
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
exit...(no lcd-support)
LCD-Init failed!
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.1.1:/tmp/harddisk/filme/ -> /mnt/filme
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[lcdd] set contrast failed!: Device or resource busy
[lcdd] set power failed!: Device or resource busy
[lcdd] set invert failed!: Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[sectionsd] getUTC: read: Connection timed out
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0008
debug: Got Block #0012
debug: Got Block #0016
debug: Got Block #0020
debug: Got Block #0024
debug: Got Block #0028
debug: Got Block #0032
debug: Got Block #0036
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 158020
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Aug 7 2006 - 21:15:08)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . | / - \ |
.FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 1 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 759063 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 758999 Bytes = 741.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #3 Mo Aug 7 20:59:49 CEST 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30644k available (1296k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:13:f7:60
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.1.3 (2006.08.07-18:48+0000) multi-call
Starting pid 10, console /dev/console: '/etc/init.d/rcS'
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
dboxide: activating cs2
dboxide: address space of DBox2 IDE CPLD is at: c38aa000
dboxide: probing dbox2 IDE CPLD: walking bit test failed: fffffffe != fbffffdc
dboxide: not a valid dbox2 IDE CPLD detected
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory
hdparm: Can't stat '/dev/ide/host0/bus0/target0/lun0/disc': No such file or directory
Thu Jan 1 12:00:00 CET 1970
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av: AVIA500 sptsfix is off
Machine check in kernel mode.
Caused by (from SRR1=9032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C39188D8 XER: 20000000 LR: C3918B1C SP: C1BE7D90 REGS: c1be7ce0 TRAP: 0200 Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1be6000[81] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: C3918B1C C1BE7D90 C1BE6000 00000080 00000000 C3920000 C1E5AC2C FDFFE000
GPR08: C1E5AC40 C3920000 00000000 00000000 48008024 100AB69C 00000001 10080000
GPR16: 00000001 100A0000 100B3740 100B33F8 00009032 C1BE7EA0 C1B76000 C3920000
GPR24: C1E5ABE0 00000007 C391E000 C01675C8 FFFFFFEA 00000000 C0170000 C3918000
Call backtrace:
C3918B1C C391A964 C0010FF4 C000285C 10026D18 10003FCC 10004048
0FEC3DBC 00000000
Bus error
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
$Id: sectionsd.cpp,v 1.227 2006/06/08 20:19:32 houdini Exp $
[sectionsd] Caching max 3000 events
[sectionsd] Caching 3 days
[sectionsd] Events are old 60min after their end time
$Id: zapit.cpp,v 1.389 2006/06/08 20:17:58 houdini Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
/tmp/currentservices.xml: No such file or directory
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C3918098 XER: 20000000 LR: C3918088 SP: C169DE10 REGS: c169dd60 TRAP: 0200 Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c169c000[121] 'zapit' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C169DE10 C169C000 00000001 000000E0 20006F06 00000000 C3BAE9E8
GPR08: 00000000 C3920000 C3920000 C0004BE0 84002028 1003463C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 0169DF40 C3BAE9E8 C17206D0
GPR24: C1682090 00000001 00000000 00000000 000000E0 00000000 00000000 00000000
Call backtrace:
C003D9D0 C3BAEEC0 C38F44E8 C38EF380 C0042B64 C000285C 00000000
10012E18 10012EE8 1000F3F0 1001198C 0FCB7DBC 00000000
[camd] ca system id: 1722
$Id: controld.cpp,v 1.124 2006/06/27 10:21:59 barf Exp $
[controld] Boxtype detected: (1, Nokia D-BOX2)
Machine check in kernel mode.
Caused by (from SRR1=1032): Transfer error ack signal
Oops: machine check, sig: 7
NIP: C3918098 XER: 00000000 LR: C3918088 SP: C1675DB0 REGS: c1675d00 TRAP: 0200 Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1674000[127] 'controld' Last syscall: 54
last math 00000000 last altivec 00000000
GPR00: 00000000 C1675DB0 C1674000 00000001 000003B0 C1675E14 C1675E50 C3BAE35C
GPR08: 00000000 C3920000 C3920000 C0004BE0 84002028 1002122C 00000000 00000000
GPR16: 00000000 00000000 00000000 00000000 00009032 01675F40 C3BAE35C C1720C80
GPR24: C16769B0 00000002 00000000 C1675E14 000003B0 00000000 7FFFFD60 C1675E50
Call backtrace:
C1675DB4 C391A750 C3BAE68C C38F45C8 C38EF380 C0042B64 C000285C
7FFFFDB0 1000618C 1000695C 10005C5C 0FC64DBC 00000000
[camd] no card is in slot #2
[camd] no card is in slot #1
[nhttpd] Neutrino HTTP-Server starting..
clear failed: Device or resource busy
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
/bin/neutrino: /lib/libpng12.so.0: no version information available (required by /bin/neutrino)
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[deutsch.locale] missing entry: moviebrowser.edit_book_name_info2
[deutsch.locale] missing entry: moviebrowser.edit_book_pos_info2
[deutsch.locale] has 2 missing entrys
clear failed: Device or resource busy
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
exit...(no lcd-support)
LCD-Init failed!
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
/dev/input/event1: No such file or directory
[CFSMounter] Mount(0) 192.168.1.1:/tmp/harddisk/filme/ -> /mnt/filme
[neutrino] menue setup
loading locales: scandir: No such file or directory
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] received 0 sats
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[neutrino] registering as event client
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/controld.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[lcdd] set contrast failed!: Device or resource busy
[lcdd] set power failed!: Device or resource busy
[lcdd] set invert failed!: Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
lcdd: CLCDDisplay::update(): write(): Device or resource busy
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[CBasicClient] connect failed.
/tmp/zapit.sock: Connection refused
[sectionsd] getUTC: read: Connection timed out
-
wolgade
- Semiprofi
- Beiträge: 1313
- Registriert: Donnerstag 2. Dezember 2004, 00:18
Ist wahrscheinlich nicht das Problem, aber trotzdem:
Ansonsten sind im Bootlog noch andere Anomalien, bei denen ich allerdings nicht weiterhelfen kann. Ich würde das IDE-Interface ausbauen und schauen, ob die Box ohne Interface funktioniert. Wenn ja, dann kannst du beim Wiedereinbau des IF mal kürzere Distanzhülsen probieren (s. Link).
Sieht nach Kontaktproblem am Steckverbinder des Interface aus. Siehe auch:http://forum.tuxbox.org/forum/viewtopic.php?t=42696dboxide: probing dbox2 IDE CPLD: walking bit test failed: fffffffe != fbffffdc
Ansonsten sind im Bootlog noch andere Anomalien, bei denen ich allerdings nicht weiterhelfen kann. Ich würde das IDE-Interface ausbauen und schauen, ob die Box ohne Interface funktioniert. Wenn ja, dann kannst du beim Wiedereinbau des IF mal kürzere Distanzhülsen probieren (s. Link).
-
ManfredK2
- Einsteiger
- Beiträge: 107
- Registriert: Freitag 25. März 2005, 20:14
ja, das mit dem "walking bit test" kommt jetzt auch noch hinzu. Vorher hats mit dem IF aber auch nicht geklappt, nur die Fehlermeldung war anders:
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dbox2ide: $Id: main.c,v 1.8 2006/09/09 14:13:23 carjay Exp $
ide: late registration of driver.
dbox2ide: activating cs2
dbox2ide: address space of DBox2 IDE CPLD is at: 0xc38aa000
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
hda: no response (status = 0xa1), resetting drive
hda: no response (status = 0xa1)
hdb: no response (status = 0xa1), resetting drive
hdb: no response (status = 0xa1)
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory
hdparm: /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Starting the automounter
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
dbox2ide: $Id: main.c,v 1.8 2006/09/09 14:13:23 carjay Exp $
ide: late registration of driver.
dbox2ide: activating cs2
dbox2ide: address space of DBox2 IDE CPLD is at: 0xc38aa000
Probing IDE interface ide0...
ide0: Wait for ready failed before probe !
hda: no response (status = 0xa1), resetting drive
hda: no response (status = 0xa1)
hdb: no response (status = 0xa1), resetting drive
hdb: no response (status = 0xa1)
mount: Mounting /dev/ide/host0/bus0/target0/lun0/part2 on /hdd failed: No such file or directory
hdparm: /dev/ide/host0/bus0/target0/lun0/disc: No such file or directory
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
-
gurgel
- Tuxboxer
- Beiträge: 2473
- Registriert: Dienstag 8. Oktober 2002, 21:06
Re: Kabelbox sucht Sender auf SAT
Auch ohne Interface? Dem Bootlog nach ist vermutlich der avia kaputt.ManfredK2 hat geschrieben:Hallo zusammen,
nachdem ich meine Nokiabox 2x Avia 500 im Zuge des IDE-IF-Einbaus jetzt unzählige Male zerlegt habe, ist das Teil (die Box) offenbar hopps gegangen. Im Display wird im Deep-Standby zwar noch der grüne Punkt angezeigt, nach dem Einschalten bleibt das Display aber schwarz.
Die Box bootet Neutrino, bringt aber die Fehlermeldung, dass keine Sender verfügbar sind -> Kanalsuche. In der Kanalsuche wird mir nur die Option auf Astra nach Sendern zu suchen angeboten, obwohl es eine Kabelbox ist. Die Box ist ansonsten ohne Probleme bedienbar.
Gestern wollte ich dann versuchsweise über Internet das JTG-Komplettimage 2.2 flashen. Lt. Bildschirmanzeige wurde das Image heruntergeladen, der Flash gelöscht und dann programmiert - die Box ist aber unverändert (UCodes noch vorhanden etc.)
Die Box dürfte hinüber sein, oder ?
Gruß
Manfred
Test
-
PT-1
- Moderator english
- Beiträge: 2458
- Registriert: Donnerstag 20. Dezember 2001, 00:00
-
gurgel
- Tuxboxer
- Beiträge: 2473
- Registriert: Dienstag 8. Oktober 2002, 21:06