Ext3 im kernel compiliert nicht !

Beitrag von **geko37** » Samstag 9. September 2006, 19:37

Mal ne wahrscheinlich dumme frage ! Wenn ich im kernel ext2 und ext3 per option =y aktiviere, kompiliert er nicht mehr durch ! Ext2 ist kein Thema aber bei ext3 klappts nicht ! muss noch zuätzlich was aktiviert werden ???

Beitrag von **Houdini** » Samstag 9. September 2006, 21:46

kannst auch die ide.config nehmen.
welche Fehlermeldung hast du?

Beitrag von **geko37** » Sonntag 10. September 2006, 11:04

Houdini hat geschrieben:kannst auch die ide.config nehmen.
welche Fehlermeldung hast du?

make[4]: Entering directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/fs/ext3'
powerpc-tuxbox-linux-gnu-gcc -D__KERNEL__ -I/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -I/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/arch/ppc -fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring -mcpu=860 -nostdinc -iwithprefix include -DKBUILD_BASENAME=balloc -c -o balloc.o balloc.c
In file included from balloc.c:18:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:623: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:624: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:625: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:626: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:641: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:641: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:642: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:642: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:649: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:649: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:650: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:650: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:658: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:658: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:670: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:670: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:671: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_fs.h:671: warning: function declaration isn't a prototype
In file included from balloc.c:19:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:67: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:69: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:76: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:77: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:79: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:79: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:91: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:93: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_abort_handle':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:95: error: `err' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:95: error: (Each undeclared identifier is reported only once
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:95: error: for each function it appears in.)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:98: error: `caller' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:98: error: `err_fn' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h

error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:101: warning: implicit declaration of function `BUFFER_TRACE'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:102: warning: implicit declaration of function `journal_abort_handle'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:102: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:109: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:110: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `__ext3_journal_get_undo_access':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:111: warning: implicit declaration of function `journal_get_undo_access'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:111: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:111: error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:113: error: `where' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:119: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:120: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `__ext3_journal_get_write_access':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:121: warning: implicit declaration of function `journal_get_write_access'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:121: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:121: error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:123: error: `where' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:129: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:130: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `__ext3_journal_dirty_data':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:131: warning: implicit declaration of function `journal_dirty_data'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:131: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:131: error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:131: error: `async' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:133: error: `where' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:138: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:139: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_forget':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:140: warning: implicit declaration of function `journal_forget'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:140: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:140: error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:144: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:146: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `__ext3_journal_revoke':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:147: warning: implicit declaration of function `journal_revoke'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:147: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:147: error: `blocknr' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:147: error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:149: error: `where' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:155: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:156: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `__ext3_journal_get_create_access':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:157: warning: implicit declaration of function `journal_get_create_access'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:157: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:157: error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:159: error: `where' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:165: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:166: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `__ext3_journal_dirty_metadata':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:167: warning: implicit declaration of function `journal_dirty_metadata'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:167: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:167: error: `bh' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:169: error: `where' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:197: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:198: warning: return type defaults to `int'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_start':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:199: error: `journal_t' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:199: error: `journal' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:208: warning: implicit declaration of function `is_journal_aborted'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:214: warning: implicit declaration of function `journal_start'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:214: warning: return makes pointer from integer without a cast
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:217: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:219: warning: return type defaults to `int'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_try_start':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:222: warning: implicit declaration of function `journal_try_start'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:222: warning: return makes pointer from integer without a cast
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:232: error: parse error before "handle_t"
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:233: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `__ext3_journal_stop':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:234: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:235: warning: implicit declaration of function `journal_stop'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:237: error: `inode' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:241: error: `where' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:247: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:248: warning: return type defaults to `int'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_current_handle':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:249: warning: implicit declaration of function `journal_current_handle'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:249: warning: return makes pointer from integer without a cast
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:253: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:254: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_log_start_commit':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:255: warning: implicit declaration of function `log_start_commit'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:255: error: `journal' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:255: error: `transaction' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:258: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:259: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_log_wait_commit':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:260: warning: implicit declaration of function `log_wait_commit'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:260: error: `journal' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:260: error: `tid' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:263: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:264: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_extend':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:265: warning: implicit declaration of function `journal_extend'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:265: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:265: error: `nblocks' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:268: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:269: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_restart':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:270: warning: implicit declaration of function `journal_restart'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:270: error: `handle' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:270: error: `nblocks' undeclared (first use in this function)
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_blocks_per_page':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:275: warning: implicit declaration of function `journal_blocks_per_page'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: At top level:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:278: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:279: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h: In function `ext3_journal_force_commit':
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:280: warning: implicit declaration of function `journal_force_commit'
/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/include/linux/ext3_jbd.h:280: error: `journal' undeclared (first use in this function)
balloc.c: At top level:
balloc.c:256: error: parse error before '*' token
balloc.c:258: warning: function declaration isn't a prototype
balloc.c: In function `ext3_free_blocks':
balloc.c:272: error: `inode' undeclared (first use in this function)
balloc.c:279: error: `block' undeclared (first use in this function)
balloc.c:280: error: `count' undeclared (first use in this function)
balloc.c:319: error: `handle' undeclared (first use in this function)
balloc.c:399: warning: implicit declaration of function `bh2jh'
balloc.c:399: error: invalid type argument of `->'
balloc.c: In function `ext3_test_allocatable':
balloc.c:448: error: invalid type argument of `->'
balloc.c:450: error: invalid type argument of `->'
balloc.c: In function `find_next_usable_block':
balloc.c:517: error: invalid type argument of `->'
balloc.c: At top level:
balloc.c:531: error: parse error before '*' token
balloc.c:534: warning: function declaration isn't a prototype
balloc.c: In function `ext3_new_block':
balloc.c:550: error: `errp' undeclared (first use in this function)
balloc.c:551: error: `inode' undeclared (first use in this function)
balloc.c:581: error: `goal' undeclared (first use in this function)
balloc.c:669: error: `handle' undeclared (first use in this function)
balloc.c:722: error: invalid type argument of `->'
balloc.c: In function `ext3_free_blocks':
balloc.c:338: warning: value computed is not used
make[4]: *** [balloc.o] Fehler 1
make[4]: Leaving directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/fs/ext3'
make[3]: *** [first_rule] Fehler 2
make[3]: Leaving directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/fs/ext3'
make[2]: *** [_subdir_ext3] Fehler 2
make[2]: Leaving directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.32/fs'
make[1]: *** [_dir_fs] Fehler 2
make[1]: Leaving directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.32'
make: *** [.deps/linuxkernel] Fehler 2
geko37@linux:~/tuxbox-cvs/cdk>

wo zeigt bei dir denn cdk/linux/include/asm hin?

Beitrag von **geko37** » Sonntag 10. September 2006, 12:11

Houdini hat geschrieben:wo zeigt bei dir denn cdk/linux/include/asm hin?

Ich gleubae ich habe den Fehler ! Melde mich wieder !

Beitrag von **elio** » Dienstag 12. September 2006, 20:14

hab genau den selben fehler u. bekomm ihn nicht weg ...

kernel scho neu runtergeladen .. nichts .. verzeichnisse gelöscht neu angelegt ... cvs neu ausgecheckt ... es will einfach nicht !

gilt immer noch:

wo zeigt bei dir denn cdk/linux/include/asm hin?

Houdini hat geschrieben:gilt immer noch:
wo zeigt bei dir denn cdk/linux/include/asm hin?

Zeigt auf : linux-2.4.33.3

mich macht das noch irre !

owerpc-tuxbox-linux-gnu-ld -r -o ext2.o balloc.o bitmap.o dir.o file.o fsync.o ialloc.o inode.o ioctl.o namei.o super.o symlink.o
make[4]: Leaving directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/fs/ext2'
make[3]: Leaving directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/fs/ext2'
make -C ext3
make[3]: Entering directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/fs/ext3'
make all_targets
make[4]: Entering directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/fs/ext3'
powerpc-tuxbox-linux-gnu-gcc -D__KERNEL__ -I/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -I/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/arch/ppc -fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring -mcpu=860 -nostdinc -iwithprefix include -DKBUILD_BASENAME=balloc -c -o balloc.o balloc.c
In file included from balloc.c:18:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:623: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:624: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:625: error: parse error before '*' token

Der fehler besteht aber nur bei aktivierten ext3 ! Wenn ich ohne ext3 kompiliere klappts sofort ! Der selbe fehler taucht auch bei 2.4.32 auf ! Alles kompiliert vom kernel nur dieses ext3 nicht !

Woran kann es liegen ?? Die normale ide conf habe ich schon getestet aber wie gesagt es hängt beim ext3 !

Weiß den wirklich keiner Rat ???

poste/stell zur Verfügung mal deine linux/.config

CONFIG_JBD=y/m

Houdini hat geschrieben:CONFIG_JBD=y/m

#
# Automatically generated make config: don't edit
#
# CONFIG_UID16 is not set
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_ADVANCED_OPTIONS=y

#
# Loadable module support
#
CONFIG_MODULES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_KMOD is not set

#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
# CONFIG_6xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_NOT_COHERENT_CACHE=y
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
# CONFIG_BSEIP is not set
# CONFIG_FADS is not set
CONFIG_DBOX2=y
# CONFIG_TQM823L is not set
# CONFIG_TQM850L is not set
# CONFIG_TQM855L is not set
# CONFIG_TQM860L is not set
# CONFIG_FPS850L is not set
# CONFIG_TQM860 is not set
# CONFIG_SPD823TS is not set
# CONFIG_IVMS8 is not set
# CONFIG_IVML24 is not set
# CONFIG_SM850 is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_SMP is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_EMBEDDEDBOOT=y

#
# General setup
#
# CONFIG_HIGHMEM is not set
# CONFIG_LOWMEM_SIZE_BOOL is not set
# CONFIG_KERNEL_START_BOOL is not set
# CONFIG_TASK_SIZE_BOOL is not set
# CONFIG_PIN_TLB is not set
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_PCI is not set
CONFIG_NET=y
# CONFIG_SYSCTL is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_OOM_KILLER is not set
# CONFIG_HOTPLUG is not set
# CONFIG_BADRAM is not set
# CONFIG_PCMCIA is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set
# CONFIG_GEN_RTC is not set
# CONFIG_PPC_RTC is not set
# CONFIG_CMDLINE_BOOL is not set

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_CFI_GEOMETRY=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
# CONFIG_MTD_AMDSTD is not set
# CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set

#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_DBOX2=y
# CONFIG_MTD_CFI_FLAGADM is not set
# CONFIG_MTD_PCI is not set
# CONFIG_MTD_PCMCIA is not set

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_DOCPROBE is not set
# CONFIG_MTD_DOCECC is not set

#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_NAND_DISKONCHIP is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_CISS_MONITOR_THREAD is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BLK_STATS is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set

#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set

#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=m

#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
# CONFIG_IDEDISK_STROKE is not set
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_BLK_DEV_MPC8xx_IDE is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
# CONFIG_BLK_DEV_ATARAID_MEDLEY is not set
# CONFIG_BLK_DEV_ATARAID_SII is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_GMAC is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Console drivers
#

#
# Frame-buffer support
#
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_OF is not set
# CONFIG_FB_CONTROL is not set
# CONFIG_FB_PLATINUM is not set
# CONFIG_FB_VALKYRIE is not set
# CONFIG_FB_CT65550 is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S3TRIO is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_FBCON_ADVANCED=y
# CONFIG_FBCON_MFB is not set
# CONFIG_FBCON_CFB2 is not set
# CONFIG_FBCON_CFB4 is not set
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
# CONFIG_FBCON_CFB24 is not set
# CONFIG_FBCON_CFB32 is not set
# CONFIG_FBCON_AFB is not set
# CONFIG_FBCON_ILBM is not set
# CONFIG_FBCON_IPLAN2P2 is not set
# CONFIG_FBCON_IPLAN2P4 is not set
# CONFIG_FBCON_IPLAN2P8 is not set
# CONFIG_FBCON_MAC is not set
# CONFIG_FBCON_VGA_PLANES is not set
# CONFIG_FBCON_VGA is not set
# CONFIG_FBCON_HGA is not set
CONFIG_FBCON_SHIFT=y
# CONFIG_FBCON_FONTWIDTH8_ONLY is not set
CONFIG_FBCON_FONTS=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
CONFIG_FONT_SUN8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set

#
# Input core support
#
CONFIG_INPUT=y
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=720
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=576
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_UINPUT is not set

#
# Macintosh device drivers
#

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGO8XX is not set
CONFIG_I2C_CHARDEV=y
# CONFIG_I2C_PROC is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set

#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_CS461X is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_INPUT_SERIO is not set
# CONFIG_INPUT_SERPORT is not set

#
# Joysticks
#
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_STINGER is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_IPMI_PANIC_EVENT is not set
# CONFIG_IPMI_DEVICE_INTERFACE is not set
# CONFIG_IPMI_KCS is not set
# CONFIG_IPMI_WATCHDOG is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I810_TCO is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_SCx200_WDT is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_MACHZ_WDT is not set
CONFIG_8xx_WDT=y
# CONFIG_SCx200 is not set
# CONFIG_SCx200_GPIO is not set
# CONFIG_AMD_PM768 is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set

#
# Direct Rendering Manager (XFree86 DRI support)
#
# CONFIG_DRM is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y

#
# Video For Linux
#
# CONFIG_VIDEO_PROC_FS is not set
# CONFIG_I2C_PARPORT is not set

#
# Video Adapters
#
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_ZORAN_BUZ is not set
# CONFIG_VIDEO_ZORAN_DC10 is not set
# CONFIG_VIDEO_ZORAN_LML33 is not set
# CONFIG_VIDEO_ZR36120 is not set
# CONFIG_VIDEO_MEYE is not set

#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_MIROPCM20 is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BEFS_DEBUG is not set
# CONFIG_BFS_FS is not set
CONFIG_EXT3_FS=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
# CONFIG_UMSDOS_FS is not set
CONFIG_VFAT_FS=y
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_LZO is not set
# CONFIG_JFFS2_LZARI is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_PROC is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_SQUASHFS_VMALLOC is not set
CONFIG_SQUASHFS_LZMA=y
CONFIG_SQUASHFS_LZMA_LC=3
CONFIG_SQUASHFS_LZMA_LP=0
CONFIG_SQUASHFS_LZMA_PB=2
# CONFIG_TMPFS is not set
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_XFS_FS is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_TRACE is not set
# CONFIG_XFS_DEBUG is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_POSIX=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
CONFIG_LUFS_FS=m
# CONFIG_ZISOFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y

#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Sound
#
CONFIG_SOUND=y
# CONFIG_SOUND_ALI5455 is not set
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
# CONFIG_MIDI_EMU10K1 is not set
# CONFIG_SOUND_FUSION is not set
# CONFIG_SOUND_CS4281 is not set
# CONFIG_SOUND_ES1370 is not set
# CONFIG_SOUND_ES1371 is not set
# CONFIG_SOUND_ESSSOLO1 is not set
# CONFIG_SOUND_MAESTRO is not set
# CONFIG_SOUND_MAESTRO3 is not set
# CONFIG_SOUND_FORTE is not set
# CONFIG_SOUND_ICH is not set
# CONFIG_SOUND_RME96XX is not set
# CONFIG_SOUND_SONICVIBES is not set
# CONFIG_SOUND_TRIDENT is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_TVMIXER is not set
# CONFIG_SOUND_AD1980 is not set
# CONFIG_SOUND_WM97XX is not set

#
# MPC8xx Options
#

#
# Generic MPC8xx Options
#
CONFIG_8xx_COPYBACK=y
# CONFIG_8xx_CPU6 is not set
# CONFIG_UCODE_PATCH is not set

#
# MPC8xx CPM Options
#
CONFIG_SCC_ENET=y
# CONFIG_SCC1_ENET is not set
CONFIG_SCC2_ENET=y
# CONFIG_SCC3_ENET is not set
# CONFIG_FEC_ENET is not set
CONFIG_ENET_BIG_BUFFERS=y
CONFIG_8xx_SMC1=y
CONFIG_8xx_SMC2=y
CONFIG_ALTSMC2=y
# CONFIG_CONS_SMC2 is not set
# CONFIG_8xx_SCC1 is not set
# CONFIG_8xx_SCC3 is not set
# CONFIG_8xx_SCC4 is not set

#
# USB support
#
# CONFIG_USB is not set

#
# Support for USB gadgets
#
# CONFIG_USB_GADGET is not set

#
# Bluetooth support
#
# CONFIG_BLUEZ is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# CONFIG_REED_SOLOMON is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=0[/code]

Hmmm, config sieht gut aus, da fällt mir nix mehr ein

Houdini hat geschrieben:Hmmm, config sieht gut aus, da fällt mir nix mehr ein

Ist echt komisch ! Habe hier noch nen Kollegen mit dem gleichen prob !

Wenn ich in der config ext3 deaktiviere dann läuft er durch !
Nur ich benötige Ext3 !

Es muss ja ne ursache haben ! Habe das cvsdir mal neu angelegt und neu ausgecheckt und neu gebaut ! Aber der fehler ist weiterhin da ! Mit aktivierten ext3 geht nix !

das muss an dem CONFIG_JBD liegen, schau mal ob da vielleicht faule Zeilenenden drin sind

Houdini hat geschrieben:das muss an dem CONFIG_JBD liegen, schau mal ob da vielleicht faule Zeilenenden drin sind

make[3]: Entering directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/fs/ext3'
make all_targets
make[4]: Entering directory `/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/fs/ext3'
powerpc-tuxbox-linux-gnu-gcc -D__KERNEL__ -I/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer -I/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/arch/ppc -fsigned-char -msoft-float -pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring -mcpu=860 -nostdinc -iwithprefix include -DKBUILD_BASENAME=balloc -c -o balloc.o balloc.c
In file included from balloc.c:18:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:623: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:624: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:625: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:626: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:641: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:641: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:642: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:642: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:649: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:649: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:650: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:650: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:658: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:658: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:670: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:670: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:671: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_fs.h:671: warning: function declaration isn't a prototype
In file included from balloc.c:19:
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_jbd.h:67: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_jbd.h:69: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_jbd.h:76: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_jbd.h:77: warning: function declaration isn't a prototype
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_jbd.h:79: error: parse error before '*' token
/home/geko37/tuxbox-cvs/cdk/linux-2.4.33.3/include/linux/ext3_jbd.h:79: warning: function declaration isn't a prototype

Es muss doch irgend eine abhängigkeit geben, warum er ext2 etc kompiliert, nur halt das ext3 modul nicht ! Wenn er die anderen Module auch nicht machen würde, währe ich der Meinung bei meinem System stimmt was nicht ! Aber es ist wie gesagt nur das ext3 Modul was nicht geht ! Enigma & Neutrino etc. macht er ! Es hakt nur bei aktiviertem ext3 !