Preisfrage: was hat diese Sagem
- Sagem 2xA / Kabel bleibt meistens beim booten hängen (s. BootLOG)
- Ab und zu fährt sie dann doch hoch, jedoch Fehlfarben im GUI trotz eingestelltem Standardmenüs (ucodes vorhanden).
- TS-Streams laufen / korrekte Farben/korrekter Ton
- Farben der Startup/Shutdown/RadioLogos sind OK.
- Ob FE oK unbekannt, mangels Kabelanschluß
- Flash scheint OK. Kernel panics oder oopses hab ich keine gesehen ->(MPC/RAM OK?).
- Fernbedienung/Display scheinen OK -> (FP OK?)
---------
Frage:
Könnte man da den "Digital Video Encoder (SAA7126)" in Betracht ziehen?
Sind typische Fehlerbilder bekannt?
Oder doch Holzweg?
*EDIT*
Eben noch ein MP3 getestet: nur rauschiger Müll..... mhhh
Evtl. doch der AVIA600?
Danke im Vorraus.
Boot-LOG
debug: DDF: Calibrating delay loop... debug: DDF: 66.8269 BogoMIPS
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-b5.aa.56.07.00.00-f4
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/sagem-dbox2/kernel/os in Flash-FS
debug: Got Block #0040
will verify ELF image, start= 0x800000, size= 148768
verify sig: 262
Branching to 0x40000
U-Boot 1.1.4 (Tuxbox) (Mar 2 2006 - 02:34:30)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Sagem, BMon V1.1
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
*** Warning - bad CRC, using default environment
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: .........
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (jffs2) loading 'vmlinuz' to 0x100000
### FS load complete: 657719 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 657655 Bytes = 642.2 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (dietmarw@linux) (gcc version 3.4.4) #4 Do Mr 2 02:34
:57 CET 2006
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 247500000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30820k available (1116k kernel code, 372k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:39:5b:af
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cramfs: wrong magic
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Ab und an auch noch
Starting pid 11, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.32-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/tuxbox.o
Segmentation fault
...
Segmentation fault
Segmentation fault
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_oss.o
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pcm_play_buffer
insmod: unresolved symbol avia_gt_pcm_stop
insmod: unresolved symbol avia_gt_pcm_set_signed
insmod: unresolved symbol avia_gt_pcm_set_endian
insmod: unresolved symbol avia_gt_pcm_set_rate
insmod: unresolved symbol avia_gt_pcm_set_width
insmod: unresolved symbol avia_gt_pcm_poll
insmod: unresolved symbol avia_gt_pcm_set_channels
insmod: unresolved symbol avia_av_get_sample_rate
insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
insmod: unresolved symbol avia_gt_pcm_get_block_size
Segmentation fault
Segmentation fault
...
Segmentation fault
Starting pid 79, console /dev/console: '/etc/init.d/start'
Please press Enter to activate this console.
Flash-LOG
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: LCD init error -1
debug: BMon V1.1 mID 03
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-b5.aa.56.07.00.00-f4
debug: HWrev 41 FPrev 0.23
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26ec0, &_data 0x26ec0, &_edata 0x2a9bc
debug: &_end 0x35944, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.123.100, My IP 192.168.123.99
debug: Sending TFTP-request for file D/DBOX/dboxwrite/ppcboot
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)
Initializing...
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-39-5b-af
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial
Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.123.100; our IP address is 192.168.123.99
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading:
lo: 0x100000
unprotecting 4
unprotecting 5
unprotecting 6
unprotecting 7
unprotecting 8
unprotecting 9
unprotecting a
unprotecting b
unprotecting c
unprotecting d
unprotecting e
unprotecting f
unprotecting 10
unprotecting 11
unprotecting 12
unprotecting 13
unprotecting 14
unprotecting 15
unprotecting 16
unprotecting 17
unprotecting 18
unprotecting 19
unprotecting 1a
unprotecting 1b
unprotecting 1c
unprotecting 1d
unprotecting 1e
unprotecting 1f
unprotecting 20
unprotecting 21
unprotecting 22
unprotecting 23
unprotecting 24
unprotecting 25
unprotecting 26
unprotecting 27
unprotecting 28
unprotecting 29
unprotecting 2a
unprotecting 2b
unprotecting 2c
unprotecting 2d
unprotecting 2e
unprotecting 2f
unprotecting 30
unprotecting 31
unprotecting 32
unprotecting 33
unprotecting 34
unprotecting 35
unprotecting 36
unprotecting 37
unprotecting 38
unprotecting 39
unprotecting 3a
unprotecting 3b
unprotecting 3c
unprotecting 3d
unprotecting 3e
unprotecting 3f
unprotecting 40
unprotecting 41
unprotecting 42
Un-Protected 63 sectors
Erase Flash from 0x10020000 to 0x107fffff
....................................................
Erased 63 sectors
Copy to Flash...
LCD driver (KS0713) initialized
Logo Flashing
dbox2-ppcboot
