Probleme

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 18:39

Hallo,

ich habe eine d-box2 (2x avia 500) von nokia, hier haben die ext. 16mb gefehlt. Nachdem ich diese nachgerüstet habe, stürzt mir die box ab, meistens währen des Startens. Beim Hochfahren habe ich folgendes mitgeschrieben, vielleicht kann mir einer von euch helfen.
Können es evtl. ucodes sein, da die mitgelieferten identisch der ump ucodes waren??? Ich hoffe sehr auf eure Hilfe.

Frank

debug: fpID 5a dsID 01-d2.a6.d1.06.00.00-67
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 157252
verify sig: 262
Branching to 0x40000

U-Boot 1.1.4 (Tuxbox) (Dec 22 2005 - 23:11:37)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 656891 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 656827 Bytes = 641.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #4 Thu Dec 22 23:
23:45 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30856k available (1112k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:12:16:60
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.01 (2005.11.08-18:34+0000) multi-call bThu Jan 1 12:0
0:00 CET 1970
Using /lib/modules/2.4.32-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.32-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.32-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.32-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.32-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.32-dbox2/misc/avs.o
Using /lib/modules/2.4.32-dbox2/misc/saa7126.o
Using /lib/modules/2.4.32-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.32-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.32-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.32-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.32-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av: microcode verify: 2 errors.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.32-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.5 2005/10/25 15:20:33 jtgriker Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/ves1820.o
Using /lib/modules/2.4.32-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1993)...
Using /lib/modules/2.4.32-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.32-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.32-dbox2/misc/aviaEXT.o
$Id: sectionsd.cpp,v 1.216 2005/12/18 07:49:16 metallica Exp $
caching 504 hours
events are old 180min after their end time
$Id: zapit.cpp,v 1.384 2005/11/28 05:19:39 metallica Exp $
[camd] ca system id: 1702
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[ConfigFile] Unable to open file /var/tuxbox/config/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
Segmentation fault
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
zapit shot down

Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C005727C XER: 20000000 LR: C0057154 SP: C1CD9DE0 REGS: c1cd9d30 TRAP: 1000
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1cd8000[116] 'pidof' Last syscall: 3
last math 00000000 last altivec 00000000
GPR00: 00000040 C1CD9DE0 C1CD8000 00000000 C0120000 00000000 00000000 00000000
GPR08: 00000000 00000001 00000001 00000000 00000000 1006B5B8 00000000 00000000
GPR16: 00000000 00000000 FFFFFFFF C1637000 00000053 C1CD9E78 00000001 C387CE88
GPR24: 00000000 00000011 00000000 00000000 FFFFFFFF 00000000 00000063 00000000
Call backtrace:
C0057154 C0054854 C0031658 C000285C 0FEE3018 0FEE0DA0 0FEE3088
0FEE2F1C 0FEDADE0 0FEDAD30 0FEDA2E0 10042B7C 1003F8B0 1002B6A4
10003E84 10003A9C 0FEC3BDC 00000000
Floating point exception
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C005727C XER: 20000000 LR: C0057154 SP: C1CD9DE0 REGS: c1cd9d30 TRAP: 1000
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1cd8000[117] 'pidof' Last syscall: 3
last math 00000000 last altivec 00000000
GPR00: 00000040 C1CD9DE0 C1CD8000 00000000 C0120000 00000000 00000000 00000000
GPR08: 00000000 00000001 00000001 00000000 00000000 1006B5B8 00000000 00000000
GPR16: 00000000 00000000 FFFFFFFF C165C000 00000053 C1CD9E78 00000001 C387CE88
GPR24: 00000000 00000011 00000000 00000000 FFFFFFFF 00000000 00000063 00000000
Call backtrace:
C0057154 C0054854 C0031658 C000285C 0FEE3018 0FEE0DA0 0FEE3088
0FEE2F1C 0FEDADE0 0FEDAD30 0FEDA2E0 10042B7C 1003F8B0 1002B6A4
10003E84 10003A9C 0FEC3BDC 00000000
Floating point exception
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C005727C XER: 20000000 LR: C0057154 SP: C1CD9DE0 REGS: c1cd9d30 TRAP: 1000
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1cd8000[118] 'pidof' Last syscall: 3
last math 00000000 last altivec 00000000
GPR00: 00000040 C1CD9DE0 C1CD8000 00000000 C0120000 00000000 00000000 00000000
GPR08: 00000000 00000001 00000001 00000000 00000000 1006B5B8 00000000 00000000
GPR16: 00000000 00000000 FFFFFFFF C10A6000 00000053 C1CD9E78 00000001 C387CE88
GPR24: 00000000 00000011 00000000 00000000 FFFFFFFF 00000000 00000063 00000000
Call backtrace:
C0057154 C0054854 C0031658 C000285C 0FEE3018 0FEE0DA0 0FEE3088
0FEE2F1C 0FEDADE0 0FEDAD30 0FEDA2E0 10042B7C 1003F8B0 1002B6A4
10003E84 10003A9C 0FEC3BDC 00000000
Floating point exception
Going to halt system now ...
CXA2092 found
CXA2092 found
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0057270 XER: 20000000 LR: C0057154 SP: C1D05DE0 REGS: c1d05d30 TRAP: 1000
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d04000[128] 'pidof' Last syscall: 3
last math 00000000 last altivec 00000000
GPR00: 80004007 C1D05DE0 C1D04000 00000000 C0120000 00000000 00000000 00000002
GPR08: 00000000 0000005E 0000005E 00000000 7FFFFE60 1006B5B8 00000000 00000000
GPR16: 7FFFFCD8 0FE0FC34 FFFFFFFF C151E000 00000053 C1D05E78 00000001 C00C1AA4
GPR24: 00000000 00000011 00000000 00000000 80000000 00000000 0000005E C1EC5290
Call backtrace:
C0057154 C0054854 C0031658 C000285C 0FEE3018 0FEE0DA0 0FEE3088
0FEE2F1C 0FEDADE0 0FEDAD30 0FEDA2E0 10042B7C 1003F8B0 1002B6A4
10003E84 10003A9C 0FEC3BDC 00000000
Floating point exception
Unmounting 'ramfs' on '/tmp'
umount: /tmp: Device or resource busy
Unmounting 'jffs2' on '/var'
Ready to shutdown system...
The system is going down NOW !![ConfigFile] Unable to open file /var/tuxbox/conf
ig/controld.conf for writing.
[nhttpd] stop requested......
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power

frank70 hat geschrieben:avia_av: microcode verify: 2 errors.

Hi,

wenn die Avia-Firmware i.O. ist, dann ist da wohl mindestens der Avia kaputt.

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 19:00

aber wieso läuft die box mit 16MB?
Welche Avia soft meinst du??

Der Fehler:

frank70 hat geschrieben:avia_av: microcode verify: 2 errors.

kommt nur mit 32MB?

frank70 hat geschrieben:Welche Avia soft meinst du?

http://wiki.tuxbox-cvs.sourceforge.net/ ... llgemeines
http://wiki.tuxbox-cvs.sourceforge.net/ ... coder_Chip

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 19:13

habe im ucode verzeichniss die dateien

avia500.ux
avia600.ux
cam-alpha.bin
ucode.bin

wenn ich diese über den bootloader in die box bringen gibt es folgende Meldung:

UCODE.BIN - checksum failed
AVIA500.UX - version:avia500v110 - ok
AVIA600.UX - checksum failed
CAM-ALPHA.BIN - version: cam_01_02_105_E - ok

Sind es die richtigen? Wenn nicht habe ich einen riesen Problem, da ich nur diese bekommen habe!

Ich weiß nicht, wie verlässlich die Ausgaben des Bootmanagers sind (vermutlich MD5), aber das sollte wohl für die avia500.ux i.O. sein. Die ucode.bin ist wohl korrupt (oder dieses Vortex-Teil), die solltest du von der Box löschen (brauchst du nicht).

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 19:40

was ist mit der avia600???

frank70 hat geschrieben:ich habe eine d-box2 (2x avia 500) von nokia

Die Box kann ja nur entweder einen Avia500 oder einen Avia600 haben.

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 19:58

schon klar. habe mich falsch ausgedrückt. was ist mit der datei avia600.ux

Keine Ahnung, scheint kaputt (oder eine Version, die der Bootmanager nicht kennt). Lösch die doch einfach von der Box, die brauchst du doch nicht.

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 20:45

habe die ucode ud die avia600 von der box gelöscht, erst lief es ein paar minuten jetzt stürzt sie wieder regelmäßig ab. keine ahnung was noch versuchen könnte.

Poste mal ein Log mit 16MB.

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 21:00

Danke ersteinmal für Deine tatkräftige Unterstützung.

Das Bootlog werde ich morgen machen hab die box nicht mehr am PC.

Gruss
Frank

Du kannst dann auch erst mal den erweiterten Speichertest durchführen. Dazu beim Starten die Powertaste und die Pfeil-hoch-Taste an der Box zusammen drücken. Das Ergebnis dann hier posten. Aber ich vermute, dass der Speicher i.O. ist.

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 21:11

speichertest habe ich schon durchgeführt, ich meine es sind keine Fehler aber hier ist er:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: unknown demodulatordebug: BMon V1.0 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID 01-d2.a6.d1.06.00.00-67
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x1000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
debug: Extension Memory tests (0x1000000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root

Tja, also dann bleibe ich bei defektem Avia500. Aber dann müsste die Box auch bei 16MB abstürzen...

Gruß
mash

Beitrag von **frank70** » Donnerstag 5. Januar 2006, 21:23

Sie läuft jetzt mit 16MB fast 2Std

Dann weiß ich es nicht.

Gruß
mash

Beitrag von **frank70** » Freitag 6. Januar 2006, 20:06

und hier das 16mb log

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: unknown demodulatordebug: BMon V1.0 mID 01
debug: feID 00 gtxID 0b
debug: fpID 5a dsID 01-d2.a6.d1.06.00.00-67
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 157252
verify sig: 262
Branching to 0x40000

U-Boot 1.1.4 (Tuxbox) (Dec 22 2005 - 23:11:37)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 16 MB
FLASH: 8 MB
Scanning JFFS2 FS: .

.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 656891 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 656827 Bytes = 641.4 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.32-dbox2 (vom Jtg-Team) (gcc version 3.4.4) #4 Thu Dec 22 23:
23:45 CET 2005
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 14664k available (1112k kernel code, 340k data, 60k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:12:16:60
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (SquashFS)"
0x006a0000-0x00800000 : "var (JFFS2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.01 (2005.11.08-18:34+0000) multi-call bThu Jan 1 12:0
0:00 CET 1970
Using /lib/modules/2.4.32-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.32-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.32-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.32-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.32-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.32-dbox2/misc/avs.o
Using /lib/modules/2.4.32-dbox2/misc/saa7126.o
Using /lib/modules/2.4.32-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.32-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.32-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.32-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.32-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.32-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
jtginfo $Id: jtginfo.c,v 1.5 2005/10/25 15:20:33 jtgriker Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.32-dbox2/misc/ves1820.o
Using /lib/modules/2.4.32-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1993)...
Using /lib/modules/2.4.32-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.32-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $
Using /lib/modules/2.4.32-dbox2/misc/dvb2eth.o
Using /lib/modules/2.4.32-dbox2/misc/aviaEXT.o
$Id: sectionsd.cpp,v 1.216 2005/12/18 07:49:16 metallica Exp $
caching 504 hours
events are old 180min after their end time
$Id: zapit.cpp,v 1.384 2005/11/28 05:19:39 metallica Exp $
[camd] ca system id: 1702
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
[lcdd]: pthread_create(TimeThread): No such file or directory
/dev/input/event1: No such file or directory
Using /lib/modules/2.4.32-dbox2/kernel/net/sunrpc/sunrpc.o
Using /lib/modules/2.4.32-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.32-dbox2/kernel/fs/nfs/nfs.o
[CFSMounter] Mount(0) 192.168.0.110:filme -> /mnt/filme
[CFSMounter] FS mount error: "mount -t nfs 192.168.0.110:filme /mnt/filme -o ro,
soft,udp,nolock,rsize=8192,wsize=8192"
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[sectionsd] getUTC: read: Connection timed out
[SHTDCNT]: pthread_create(TimeThread): No such file or directory
[neutrino] initialized everything
zap failed!

Beitrag von **mash4077** » Freitag 6. Januar 2006, 20:16

Hi,

jetzt benutzt du aber auch andere ucodes (zumindest ucode.bin).

Ansonsten sieht der Log ja jetzt i.O. aus.

Gruß
mash

Beitrag von **frank70** » Samstag 7. Januar 2006, 11:16

ja, habe an den ucodes etwas experimentiert.

Bei den 32 MB bleibt der Fehler gleich bzw. ähnlich er stürzt regelmäßig ab, oft mit der Meldung kann nicht in controld schreiben.

Beitrag von **mash4077** » Samstag 7. Januar 2006, 11:29

Tja, du kannst dir natürlich noch ein weiteres 16MB-Modul zulegen, dann kannst du sicherer sein, ob es am Speicher liegt oder eben nicht.

Besorgt dir vielleicht ein Speichermodul aus seriöser Quelle. Gurgel oder DieMade bieten sowas an.

Gruß
mash

Beitrag von **frank70** » Samstag 7. Januar 2006, 11:39

Bin mir sicher das es aus seriöser Quelle kommt !!!!

Beitrag von **mash4077** » Samstag 7. Januar 2006, 11:45

Dann tausch das Modul doch um. Ein seriöser Verkäufer wird das bestimmt machen, wenn er auch nicht dazu verpflichtet ist.

Gruß
mash

Beitrag von **frank70** » Samstag 7. Januar 2006, 11:51

Danke für Deine Tatkräftige Unterstützung. Da wir es wohl so nicht hinbekommen werde ich das Angebot des Verkäufers (Erweiterung) annehmen und meine Box zum check hinschicken.

Trotzdem Danke für die gute Hilfe

Frank

Tuxbox-Board

Probleme

Probleme

Re: Probleme

Re: Probleme

Re: Probleme