Problem mit cvs: libdvb]

[mpanczyk]

Hallo,

beim erstellen eines eignen Images aus dem cvs erhalte ich folgende Fehler

------------------------------------
wget -c -P Archive http://www.metzlerbros.org/dvb/libdvb-0.5.5.tar.gz || \
wget -c -P Archive http://tuxbox.berlios.de/pub/tuxbox/cdk ... 5.5.tar.gz
--11:09:23-- http://www.metzlerbros.org/dvb/libdvb-0.5.5.tar.gz
=> `Archive/libdvb-0.5.5.tar.gz'
Resolving http://www.metzlerbros.org... 192.67.198.55
Connecting to http://www.metzlerbros.org|192.67.198.55|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 282,174 [application/x-tar]

100%[================================================================================================================>] 282,174 117.80K/s

11:09:27 (117.47 KB/s) - `Archive/libdvb-0.5.5.tar.gz' saved [282,174/282,174]

( rm -rf libdvb-0.5.5 || /bin/true ) && gunzip -cd Archive/libdvb-0.5.5.tar.gz | TAPE=- tar -x && ( cd libdvb-0.5.5; patch -p1 < ../Patches/libdvb.diff )
patching file Makefile
cd libdvb-0.5.5 && \
make libdvb.a libdvbci.a libdvbmpegtools.a \
AR=powerpc-tuxbox-linux-gnu-ar AS=powerpc-tuxbox-linux-gnu-as CC=powerpc-tuxbox-linux-gnu-gcc CXX=powerpc-tuxbox-linux-gnu-g++ NM=powerpc-tuxbox-linux-gnu-nm RANLIB=powerpc-tuxbox-linux-gnu-ranlib CFLAGS="-mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2" CXXFLAGS="-mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2" LDFLAGS="" PKG_CONFIG_PATH=/root/dbox2/cdkroot/lib/pkgconfig \
CFLAGS="-mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2 -Imissing/dvb/include -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE" && \
make install PREFIX=/root/dbox2/cdkroot
make[1]: Entering directory `/home/mtp/tuxbox-cvs/cdk/libdvb-0.5.5'
make -C libdvb main
make[2]: Entering directory `/home/mtp/tuxbox-cvs/cdk/libdvb-0.5.5/libdvb'
powerpc-tuxbox-linux-gnu-g++ -I. -I../include -I../../include -mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2 -Imissing/dvb/include -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c devices.cc
In file included from devices.cc:1:
../include/devices.hh:14:32: linux/dvb/frontend.h: No such file or directory
In file included from devices.cc:1:
../include/devices.hh:48: error: 'fe_spectral_inversion_t' is used as a type,
but is not defined as a type.
devices.cc:2:32: linux/dvb/frontend.h: No such file or directory
devices.cc:10: error: syntax error before `[' token
devices.cc: In function `std:::empty:& operator<<(std:::empty:&, Transponder&)
':
devices.cc:125: error: `FE_QPSK' undeclared (first use this function)
devices.cc:125: error: (Each undeclared identifier is reported only once for
each function it appears in.)
devices.cc:127: error: `FE_QAM' undeclared (first use this function)
devices.cc:135: error: `FE_OFDM' undeclared (first use this function)
devices.cc:144: error: 'class Transponder' has no member named 'inversion'
devices.cc:145: error: `INVERSION_OFF' undeclared (first use this function)
devices.cc:148: error: `INVERSION_ON' undeclared (first use this function)
devices.cc:151: error: `INVERSION_AUTO' undeclared (first use this function)
devices.cc: In function `std::istream& operator>>(std::istream&, Transponder&)
':
devices.cc:300: error: `FEC_AUTO' undeclared (first use this function)
devices.cc:301: error: 'class Transponder' has no member named 'inversion'
devices.cc:406: error: 'class Transponder' has no member named 'inversion'
devices.cc:406: error: `invset' undeclared (first use this function)
make[2]: *** [devices.o] Error 1
make[2]: Leaving directory `/home/mtp/tuxbox-cvs/cdk/libdvb-0.5.5/libdvb'
make[1]: *** [libdvb/libdvb.a] Error 2
make[1]: Leaving directory `/home/mtp/tuxbox-cvs/cdk/libdvb-0.5.5'
make: *** [.deps/libdvb] Error 2
------------------------------------
Idden was ich falsch gemacht habe nehme ich wie immer gerne entgegen.

Danke im Voraus
Matthias

[Houdini]

Hallo

>>powerpc-tuxbox-linux-gnu-g++ -I. -I../include -I../../include -mcpu=823 -mmultiple -mstring -meabi -pipe -O2 -g3 -gdwarf-2 -Imissing/dvb/include -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -c devices.cc

schau mal bei dir in cdk/Makefile und ersetzt das missing mit deiner driver directory

[mpanczyk]

Hi,

danke ich habe es hinbekommen. Macht wohl doch Sinn Fehlermeldungen komplett zu lesen,

Merci
Matthias