Log vom Absturz, was ist kaputt?

Beitrag von **bigfrog** » Sonntag 6. März 2005, 17:22

Meine Nokia 2xAmd avia500 sat stürzt immer wieder mit dem folgenden LOG ab. Dieses LOG hier stammt von einem aktuellen YADD das ich gebootet habe um Probleme mit dem Speicher der Box auszuschließen.

Was heißt:
Oops: Kernel Mode Software FPU Emulation, sig: 8
??

LOG:

DF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-2e.c5.64.03.00.00-12
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x1000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
debug: Extension Memory tests (0x1000000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.104, My IP 192.168.2.111
debug: Sending TFTP-request for file D/download/dboxDateien/YADD/NeutrinoEnigmaY
add/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 141104
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000

U-Boot 1.1.2 (Tuxbox) (Mar 4 2005 - 06:58:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##

Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########

Bytes transferred = 43045 (a825 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: #################################################################
#################################################################
####################

Bytes transferred = 763560 (ba6a8 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763496 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (dietmarw@linux) (gcc version 3.3.5) #1 Fr Mr 4 06:59
:53 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.2.104:D/down
load/dboxDateien/YADD/NeutrinoEnigmaYadd/yaddroot/ ip=192.168.2.111:192.168.2.10
4:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30560k available (1296k kernel code, 440k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:10:06:95
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.2.111, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.2.111, domain=, nis-domain=(none),
bootserver=192.168.2.104, rootserver=192.168.2.104, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.2.104
Looking up port of RPC 100005/1 on 192.168.2.104
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.00 (2005.03.04-05:56+0000) multi-call bDetected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode vB107
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.180 2005/01/13 10:48:02 diemade Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.369 2005/03/03 19:59:33 diemade Exp $
[ConfigFile] Unable to open file /var/tuxbox/config/zapit/zapit.conf for reading
.
[zapit.cpp:main:1822] /var/tuxbox/config/zapit/zapit.conf not found
[getservices.cpp:FindTransponder:189] going to parse dvb-s provider Astra 19.2E
[zapit.cpp:prepare_channels:490] LoadServices: success
[bouquets.cpp:parseBouquetsXml:363] reading bouquets
[bouquets.cpp:parseBouquetsXml:392] found 69 bouquets
[zapit.cpp:main:1842] channels have been loaded succesfully
[frontend.cpp:setDiseqcType:371] NO_DISEQC
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[frontend.cpp:secSetTone:292] 23 msec
[frontend.cpp:secSetVoltage:304] 26 msec
[frontend.cpp:secSetTone:292] 26 msec
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
[frontend.cpp:getEvent:226] FE_HAS_LOCK: freq 1469212
[camd] set emm caid 1702 capid 1000
[zapit.cpp:zapit:289] tuned frequency does not match requested frequency. differ
ence: 1288

PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 0 bit 7
[camd] program number 000f unsupported due to missing parental control
[timeThread] time(): 05.03.2005 13:54:41, tim: Sat Mar 5 13:54:41 2005
[frontend.cpp:secSetTone:292] 29 msec
[frontend.cpp:secSetVoltage:304] 27 msec
[frontend.cpp:secSetTone:292] 26 msec
[frontend.cpp:getEvent:226] FE_HAS_LOCK: freq 2091047
[zapit.cpp:zapit:289] tuned frequency does not match requested frequency. differ
ence: 1203

PES, queue 0 normal.
[camd] starting onid 0001 sid 32d4avia_gt_core: masking unhandled irq reg 1 bit
15

[camd] set emm caid 1702 capid 0320
descramble onid: 0001 sid: 32d4 status: 8484
[timeThread] time(): 05.03.2005 13:54:52, tim: Sat Mar 5 13:54:52 2005
[frontend.cpp:secSetTone:292] 24 msec
[frontend.cpp:secSetVoltage:304] 26 msec
[frontend.cpp:secSetTone:292] 27 msec
[frontend.cpp:getEvent:226] FE_HAS_LOCK: freq 1469212
[camd] set emm caid 1702 capid 1000
[zapit.cpp:zapit:289] tuned frequency does not match requested frequency. differ
ence: 1288

PES, queue 0 normal.
[camd] program number 000f unsupported due to missing parental control
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
[frontend.cpp:secSetTone:292] 30 msec
[frontend.cpp:secSetVoltage:304] 26 msec
[frontend.cpp:secSetTone:292] 27 msec
[frontend.cpp:getEvent:238] FE_HAS_SIGNAL
[frontend.cpp:getEvent:240] FE_HAS_CARRIER
[frontend.cpp:getEvent:226] FE_HAS_LOCK: freq 1878712
[zapit.cpp:zapit:289] tuned frequency does not match requested frequency. differ
ence: 1288

PES, queue 0 normal.
[camd] program number 0382 unsupported due to missing parental control
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 05.03.2005 14:25:16, tim: Sat Mar 5 14:25:16 2005

BusyBox v1.00 (2005.03.04-05:56+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

-sh: can't access tty; job control turned off
# Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C38BE160 XER: 20000000 LR: C38BE11C SP: C016EE80 REGS: c016edd0 TRAP: 1000
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c016d050[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 00001310 C016EE80 C016D050 00000001 00000000 00131022 C016F2EC FFFFFC18
GPR08: 00000013 C38C6000 C38C0000 C38C6000 44383838 100F9268 01FFB700 00000001
GPR16: FFFFFFFF 007FFF00 01FF5B9C 00000000 00001032 0016EF20 00000000 C00027C0
GPR24: C00039B4 00000000 C1EAB480 00131022 00000000 00000080 00000000 C1EAB480
Call backtrace:
C001460C C38BE8A8 C0003954 C0003A10 C00027C0 C0003F40 C0003F5C
C0002258 C018056C C0002138
PCR discontinuity: PCR: 0x0EDBE6EEA, OLDPCR: 0x0EDBD727E, Diff: 64620
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..

Beitrag von **bigfrog** » Sonntag 6. März 2005, 17:38

Hier noch eine Zweite Variante mit:

Oops: kernel access of bad area, sig: 11

Ich sollte noch sagen das die Box zunächst hochfährt und normal funktioniert bis zum Absturz. dann läuft das Bild weiter, die Box reagiert jedoch nichtmehr.

LOG:

DF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-2e.c5.64.03.00.00-12
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x1000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
debug: Extension Memory tests (0x1000000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root> boot net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.104, My IP 192.168.2.111
debug: Sending TFTP-request for file D/download/dboxDateien/YADD/NeutrinoEnigmaY
add/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 141104
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000

U-Boot 1.1.2 (Tuxbox) (Mar 4 2005 - 06:58:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##

Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########

Bytes transferred = 43045 (a825 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: #################################################################
#################################################################
####################

Bytes transferred = 763560 (ba6a8 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763496 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (dietmarw@linux) (gcc version 3.3.5) #1 Fr Mr 4 06:59
:53 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.2.104:D/down
load/dboxDateien/YADD/NeutrinoEnigmaYadd/yaddroot/ ip=192.168.2.111:192.168.2.10
4:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30560k available (1296k kernel code, 440k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:10:06:95
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.2.111, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.2.111, domain=, nis-domain=(none),
bootserver=192.168.2.104, rootserver=192.168.2.104, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.2.104
Looking up port of RPC 100005/1 on 192.168.2.104
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.00 (2005.03.04-05:56+0000) multi-call bDetected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.180 2005/01/13 10:48:02 diemade Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.369 2005/03/03 19:59:33 diemade Exp $
[getservices.cpp:FindTransponder:189] going to parse dvb-s provider Astra 19.2E
[zapit.cpp:prepare_channels:490] LoadServices: success
[bouquets.cpp:parseBouquetsXml:363] reading bouquets
[bouquets.cpp:parseBouquetsXml:392] found 69 bouquets
[zapit.cpp:main:1842] channels have been loaded succesfully
[frontend.cpp:setDiseqcType:371] NO_DISEQC
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[frontend.cpp:secSetTone:292] 25 msec
[frontend.cpp:secSetVoltage:304] 27 msec
[frontend.cpp:secSetTone:292] 23 msec
[neutrino] initialized everything
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_core: masking unhandled irq reg 0 bit 7
[frontend.cpp:getEvent:226] FE_HAS_LOCK: freq 1878712
[zapit.cpp:zapit:289] tuned frequency does not match requested frequency. differ
ence: 1288

PES, queue 0 normal.
[camd] program number 0382 unsupported due to missing parental controlavia_gt_co
re: masking unhandled irq reg 1 bit 15

[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 06.03.2005 16:26:06, tim: Sun Mar 6 16:26:06 2005
[timeThread] time(): 06.03.2005 16:26:16, tim: Sun Mar 6 16:26:16 2005
[LCDFONT] FTC_Face_Requester (Fix12/Regular)
Oops: kernel access of bad area, sig: 11
NIP: C38BE0E0 XER: 20000000 LR: C38BE088 SP: C016EEF0 REGS: c016ee40 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 007FFF96, DSISR: 000002FF
TASK = c016d050[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
GPR00: 0000007F C016EEF0 C016D050 00000001 00000200 C016EF30 C016F2EC FFFFFC18
GPR08: 00000000 00007E00 C38C0000 C38C6000 44393938 100400B4 01FFB700 00000001
GPR16: FFFFFFFF 007FFF00 01FF5B9C 00000000 00001032 0016EF20 00000000 E7400000
GPR24: C00039B4 00000000 C1DAE4E0 C017F120 C016EF20 80807E7F 00000000 007FFF94
Call backtrace:
00000001 00000000
PCR discontinuity: PCR: 0x0E78D02B7, OLDPCR: 0x0E78C0C7C, Diff: 63035
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..

Beitrag von **DieMade** » Sonntag 6. März 2005, 17:55

Schalte mal den AVIA-Watchdog ab (Einstellungen - Diverse)

Beitrag von **bigfrog** » Sonntag 6. März 2005, 18:17

Die Avia Watchdogs sind alle ausgeschaltet, sowie spts und hwsections.

Kann das die CPU sein?

Beitrag von **DieMade** » Sonntag 6. März 2005, 18:17

avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.

Sehen die Box und ich anders

Beitrag von **bigfrog** » Sonntag 6. März 2005, 18:24

OK da habt ihr beide wohl rechht!!
Allerdings steht im Menü Einstellungen/Diverse definitiv alles auf "aus"!
Gibt es eine *.conf Datei die ich editieren kann um den Watchdog zu disablen?

Beitrag von **DieMade** » Sonntag 6. März 2005, 18:26

Das wird normalerweise über Steuerdateien und die /etc/init.d/rcS geregelt. Ob das beim dietmarw-Yadd auch so ist, da bin ich überfragt.

Beitrag von **bigfrog** » Sonntag 6. März 2005, 18:32

Diese Datei hab ich gefunden:

#!/bin/sh

PATH=/sbin:/bin

hostname -F /etc/hostname
mount -a
ifup -a

test -x /sbin/inetd && inetd

if test -x /sbin/sshd ; then
/etc/init.d/start_sshd &
fi

if test -x /sbin/dropbear ; then
/sbin/dropbear
fi

touch /etc/modules.conf
depmod -ae
sleep 2
modprobe tuxbox

. /etc/profile

VENDOR=`/bin/tuxinfo -V`
VENDOR_ID=`/bin/tuxinfo -v`
MODEL=`/bin/tuxinfo -M`
MODEL_ID=`/bin/tuxinfo -m`
SUBMODEL=`/bin/tuxinfo -S`
SUBMODEL_ID=`/bin/tuxinfo -s`

echo "Detected STB:"
echo " Vendor: $VENDOR"
echo " Model: $MODEL $SUBMODEL"

modprobe dvb-core

# D-BOX2
if [ $MODEL_ID -eq 1 ]; then

# I2C core
modprobe dbox2_i2c
modprobe dvb_i2c_bridge

# Frontprozessor
modprobe dbox2_fp
modprobe dbox2_fp_input

# Frontends
# Nokia
if [ $VENDOR_ID -eq 1 ]; then
modprobe ves1820
modprobe ves1x93 board_type=1
# Philips
elif [ $VENDOR_ID -eq 2 ]; then
modprobe tda8044h
# Sagem
elif [ $VENDOR_ID -eq 3 ]; then
modprobe at76c651
modprobe ves1x93 board_type=2
fi

# Misc IO
modprobe avs
modprobe saa7126
# Philips
if [ $VENDOR_ID -eq 2 ]; then
modprobe cam mio=0xC040000
else
modprobe cam mio=0xC000000
fi
modprobe lcd

# A/V
GTOPTS=""
if [ -e /var/etc/.hw_sections ]; then
GTOPTS="hw_sections=0 "
fi
if [ -e /var/etc/.no_enxwatchdog ]; then
GTOPTS="${GTOPTS}no_watchdog=1 "
fi

modprobe avia_gt ucode=/var/tuxbox/ucodes/ucode.bin ${GTOPTS}

modprobe avia_gt_fb
modprobe avia_gt_lirc
modprobe avia_gt_oss
modprobe avia_gt_v4l2
if [ -f /var/etc/.no_watchdog ]; then
modprobe avia_av no_watchdog=1
else
modprobe avia_av
fi

modprobe avia_napi
modprobe cam_napi
modprobe avia_av_napi
if [ -e /var/etc/.spts_mode ]; then
modprobe avia_gt_napi mode=1
modprobe dvb2eth
else
modprobe avia_gt_napi
fi
modprobe aviaEXT
modprobe dbox2_fp_napi

# Dreambox
elif [ $MODEL_ID -eq 2 ]; then

# I2C core
# modprobe dvb_i2c_bridge

# Frontprozessor
modprobe dreambox_fp

# Frontends
modprobe alps_bsru6
# modprobe alps_tdme7
modprobe philips_1216

# Misc IO
modprobe ir-hw
modprobe dreambox_rc_input
modprobe avs
modprobe lcd

# A/V
modprobe stb_td
modprobe stb_fb
modprobe stb_denc
modprobe stb_aud
modprobe stb_vg
modprobe stb_clip

fi

echo "$VENDOR $MODEL - Kernel %r (%t)." > /etc/issue.net

# compatibility links
ln -sf demux0 /dev/dvb/adapter0/demux1
ln -sf dvr0 /dev/dvb/adapter0/dvr1
ln -sf fb/0 /dev/fb0

test -x /bin/loadkeys && loadkeys /share/keymaps/i386/qwertz/de-latin1.kmap.gz

if [ -e /etc/init.d/rcS.local ]; then
. /etc/init.d/rcS.local
fi

Was sollte geändert werden?

Beitrag von **DieMade** » Sonntag 6. März 2005, 18:33

touch /var/etc/.no_watchdog und reboot.

Beitrag von **bigfrog** » Sonntag 6. März 2005, 18:35

?
OK, so fit bin ich nicht,kannst du das ausformulieren?

Beitrag von **DieMade** » Sonntag 6. März 2005, 18:38

Per telnet auf die Box und dann "touch /var/etc/.no_watchdog" eingeben. Danach neu starten.

Beitrag von **bigfrog** » Sonntag 6. März 2005, 18:49

Sollte ich nach"touch /var/etc/.no_watchdog" eine Ausgabe bekommen?
Kommt nämlich nix!
Der Watchdog Thread wird wohl immer noch gestartet...

Neues StartLOG:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-2e.c5.64.03.00.00-12
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.104, My IP 192.168.2.111
debug: Sending TFTP-request for file D/download/dboxDateien/YADD/NeutrinoEnigmaY
add/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 141104
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000

U-Boot 1.1.2 (Tuxbox) (Mar 4 2005 - 06:58:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##

Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########

Bytes transferred = 43045 (a825 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: #################################################################
#################################################################
####################

Bytes transferred = 763560 (ba6a8 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763496 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (dietmarw@linux) (gcc version 3.3.5) #1 Fr Mr 4 06:59
:53 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.2.104:D/down
load/dboxDateien/YADD/NeutrinoEnigmaYadd/yaddroot/ ip=192.168.2.111:192.168.2.10
4:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30560k available (1296k kernel code, 440k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:10:06:95
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.2.111, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.2.111, domain=, nis-domain=(none),
bootserver=192.168.2.104, rootserver=192.168.2.104, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.2.104
Looking up port of RPC 100005/1 on 192.168.2.104
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.00 (2005.03.04-05:56+0000) multi-call budhcpc (v0.9.9-
pre) started
udhcpc[17]: udhcpc (v0.9.9-pre) started
Sending discover...
udhcpc[17]: Sending discover...
received bogus message (bad magic) -- ignoring
udhcpc[17]: received bogus message (bad magic) -- ignoring
Sending discover...
udhcpc[17]: Sending discover...
received bogus message (bad magic) -- ignoring
udhcpc[17]: received bogus message (bad magic) -- ignoring
Sending discover...
udhcpc[17]: Sending discover...
received bogus message (bad magic) -- ignoring
udhcpc[17]: received bogus message (bad magic) -- ignoring
No lease, failing.
udhcpc[17]: No lease, failing.
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.180 2005/01/13 10:48:02 diemade Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.369 2005/03/03 19:59:33 diemade Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices.cpp:FindTransponder:189] going to parse dvb-s provider Astra 19.2E
[zapit.cpp:prepare_channels:490] LoadServices: success
[bouquets.cpp:parseBouquetsXml:363] reading bouquets
[bouquets.cpp:parseBouquetsXml:392] found 69 bouquets
[zapit.cpp:main:1842] channels have been loaded succesfully
[frontend.cpp:setDiseqcType:371] NO_DISEQC
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[frontend.cpp:secSetTone:292] 24 msec
[frontend.cpp:secSetVoltage:304] 26 msec
[frontend.cpp:secSetTone:292] 27 msec
[neutrino] initialized everything
[frontend.cpp:getEvent:226] FE_HAS_LOCK: freq 1878712
[zapit.cpp:zapit:289] tuned frequency does not match requested frequency. differ
ence: 1288

PES, queue 0 normal.
[camd] program number 0382 unsupported due to missing parental controlavia_gt_co
re: masking unhandled irq reg 1 bit 15

[timeThread] time(): 06.03.2005 18:47:39, tim: Sun Mar 6 18:47:39 2005
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 06.03.2005 18:47:49, tim: Sun Mar 6 18:47:49 2005

Beitrag von **DieMade** » Sonntag 6. März 2005, 19:57

Auf touch kommt keine Rückmeldung.

Verschieb mal folgende Zeilen:

Code: Alles auswählen

if [ -f /var/etc/.no_watchdog ]; then
modprobe avia_av no_watchdog=1
else
modprobe avia_av
fi

so, daß sie direkt unter

Code: Alles auswählen

 modprobe lcd

stehen.

Oder /etc/modules.conf anpassen:

Code: Alles auswählen

options avia_av firmware=/var/tuxbox/ucodes

in

Code: Alles auswählen

options avia_av firmware=/var/tuxbox/ucodes no_watchdog=1

Beitrag von **bigfrog** » Sonntag 6. März 2005, 20:16

OK, hab die Zeilen verschoben.
Kann den Watchdog Thread im LOG nicht mehr finden,
dann wart ich mal bis zum nächste Absturz, wenn er denn passiert...

LOG:

Please stand by while rebooting the system.
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-2e.c5.64.03.00.00-12
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 16/16/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.104, My IP 192.168.2.111
debug: Sending TFTP-request for file D/download/dboxDateien/YADD/NeutrinoEnigmaY
add/tftpboot/u-boot
will verify ELF image, start= 0x800000, size= 141104
verify sig: 263
boot net: boot file has no valid signature
Branching to 0x40000

U-Boot 1.1.2 (Tuxbox) (Mar 4 2005 - 06:58:35)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##

Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'D/download/dboxDateien/YADD/NeutrinoEnigmaYadd/tftpboot/u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'logo-fb'.
Load address: 0x100000
Loading: #########

Bytes transferred = 43045 (a825 hex)

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.2.104; our IP address is 192.168.2.111
Filename 'kernel-yadd'.
Load address: 0x100000
Loading: #################################################################
#################################################################
####################

Bytes transferred = 763560 (ba6a8 hex)
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 763496 Bytes = 745.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (dietmarw@linux) (gcc version 3.3.5) #1 Fr Mr 4 06:59
:53 CET 2005
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/nfs rw nfsroot=192.168.2.104:D/down
load/dboxDateien/YADD/NeutrinoEnigmaYadd/yaddroot/ ip=192.168.2.111:192.168.2.10
4:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30560k available (1296k kernel code, 440k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:10:06:95
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.2.111, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.2.111, domain=, nis-domain=(none),
bootserver=192.168.2.104, rootserver=192.168.2.104, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.168.2.104
Looking up port of RPC 100005/1 on 192.168.2.104
VFS: Mounted root (nfs filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
init started: BusyBox v1.00 (2005.03.04-05:56+0000) multi-call budhcpc (v0.9.9-
pre) started
udhcpc[17]: udhcpc (v0.9.9-pre) started
Sending discover...
udhcpc[17]: Sending discover...
received bogus message (bad magic) -- ignoring
udhcpc[17]: received bogus message (bad magic) -- ignoring
Sending discover...
udhcpc[17]: Sending discover...
received bogus message (bad magic) -- ignoring
udhcpc[17]: received bogus message (bad magic) -- ignoring
Sending discover...
udhcpc[17]: Sending discover...
received bogus message (bad magic) -- ignoring
udhcpc[17]: received bogus message (bad magic) -- ignoring
No lease, failing.
udhcpc[17]: No lease, failing.
Detected STB:
Vendor: Nokia
Model: D-BOX2
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
DVB: registering frontend 0:0 (VES1893)...
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
$Id: sectionsd.cpp,v 1.180 2005/01/13 10:48:02 diemade Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
$Id: zapit.cpp,v 1.369 2005/03/03 19:59:33 diemade Exp $
avia_gt_core: masking unhandled irq reg 0 bit 7
[getservices.cpp:FindTransponder:189] going to parse dvb-s provider Astra 19.2E
[zapit.cpp:prepare_channels:490] LoadServices: success
[bouquets.cpp:parseBouquetsXml:363] reading bouquets
[bouquets.cpp:parseBouquetsXml:392] found 69 bouquets
[zapit.cpp:main:1842] channels have been loaded succesfully
[frontend.cpp:setDiseqcType:371] NO_DISEQC
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[basicsocket] send_data: Resource temporarily unavailable
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] received 17 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[frontend.cpp:secSetTone:292] 26 msec
[frontend.cpp:secSetVoltage:304] 26 msec
[frontend.cpp:secSetTone:292] 26 msec
[neutrino] initialized everything
[frontend.cpp:getEvent:226] FE_HAS_LOCK: freq 1878712
[zapit.cpp:zapit:289] tuned frequency does not match requested frequency. differ
ence: 1288

PES, queue 0 normal.
[camd] program number 0382 unsupported due to missing parental coavia_gt_core: m
asking unhandled irq reg 1 bit 15
ntrol
[timeThread] time(): 06.03.2005 20:12:52, tim: Sun Mar 6 20:12:52 2005
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
[timeThread] time(): 06.03.2005 20:13:02, tim: Sun Mar 6 20:13:02 2005

Beitrag von **bigfrog** » Sonntag 6. März 2005, 20:36

OK, da war der Absturz, gleiche Meldung wie hier im ersten LOG dieses Threads.
Hardwareproblem?

Beitrag von **DieMade** » Sonntag 6. März 2005, 20:40

Schaut so aus, ganz wild tippe ich mal auf RAM/CPU.

Beitrag von **bigfrog** » Sonntag 6. März 2005, 20:47

Gibt es eine Möglichkeit hier Sicherheit zu bekommen was kaputt ist?
Wenn ich ein YADD boote, wird dann das RAM der Box benutzt? (Dumme Frage, wahrscheinlich schon)

Lassen sich die Sachen günstig tauschen? Oder besser ne neue Box?

Beitrag von **DieMade** » Sonntag 6. März 2005, 21:45

Beides passt nicht ins heute moderne "Geiz ist Geil"-Schema. Da es sich um eine ältere Nokia (AVIA500, Rev. A CPU) handelt, muß hier schon der Liebhaberfaktor den Ausschlag geben zur Reparatur

Beitrag von **bigfrog** » Sonntag 6. März 2005, 22:49

Ich spiel mal noch ein bisschen mit ihr, vielleicht hat sie mich dann wieder lieb....

DANKE!!!