Problem beim Image flashen

Wie blitze ich ein Bild - Permanent Outgoing Incomes
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Problem beim Image flashen

Beitrag von Jon »

Hallo!

ich habe ein problem beim image flashen.
ich habe eine nokia dbox2 und möchte ein image drauf spielen.
könnte mir da bitte jemand helfen?

das bootlog sieht so aus:

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ab.89.45.07.00.00-ba
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0052

will verify ELF image, start= 0x800000, size= 203252
verify sig: 262
Branching to 0x40000


PPCBoot 1.1.6 (TuxBox) (Jul 12 2002 - 20:57:43)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Watchdog enabled
Board: DBOX2, Nokia
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
find_inode failed for name=tuxbox
load: Failed to find inode
LCD: find_inode failed for name=tuxbox
load: Failed to find inode
ready - can't find logo in flash - try network
BOOTP broadcast 1

gruß Jon
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Hallo!

Firewall, Vierenscanner abschalten / deinstallieren.
boot net failed beachten http://wiki.tuxbox-cvs.sourceforge.net/Boot_net_failed

Gruß Nachtvogel
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

da bin ich nochmal!

hatte versehentlich das falsche netzwerkkabel (1:1) genommen. ups, sorry!

hab aber noch ein problem.
nachdem ich das flashen durch ist, zeigt die box nichts an. das display leutet nur grün.

kann mir denn da bitte jemand helfen?

gruß Jon

hier nochmal das bootlog nach dem flashen:

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ab.89.45.07.00.00-ba
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.100, My IP 192.168.0.122
debug: Sending TFTP-request for file E/Dateien/dbox/ppcboot.txt
will verify ELF image, start= 0x800000, size= 222280
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Jul 12 2001 - 02:51:28)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-c3-d7
FLASH: 8 MB
FB logo at: none
Input: serial
Output: serial

Any key druecken um das Flashing abzubrechen.. : 0
LCD driver (KS0713) initialized
Logo FlashingBOOTP broadcast 1
TFTP from server 192.168.0.100; our IP address is 192.168.0.122
Filename '/tftpboot/13.img'.
Load address: 0x100000
Loading: #######################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
################################################################################
######################
done
lo: 0x100000unprotecting 4
[10001]-> [0] [S800080] unprotecting 5
[10001]-> [0] [S800080] unprotecting 6
[10001]-> [0] [S800080] unprotecting 7
[10001]-> [0] [S800080] unprotecting 8
[10001]-> [0] [S800080] unprotecting 9
[10001]-> [0] [S800080] unprotecting a
[10001]-> [0] [S800080] unprotecting b
[10001]-> [0] [S800080] unprotecting c
[10001]-> [0] [S800080] unprotecting d
[10001]-> [0] [S800080] unprotecting e
[10001]-> [0] [S800080] unprotecting f
[10001]-> [0] [S800080] unprotecting 10
[10001]-> [0] [S800080] unprotecting 11
[10001]-> [0] [S800080] unprotecting 12
[10001]-> [0] [S800080] unprotecting 13
[10001]-> [0] [S800080] unprotecting 14
[10001]-> [0] [S800080] unprotecting 15
[10001]-> [0] [S800080] unprotecting 16
[10001]-> [0] [S800080] unprotecting 17
[10001]-> [0] [S800080] unprotecting 18
[10001]-> [0] [S800080] unprotecting 19
[10001]-> [0] [S800080] unprotecting 1a
[10001]-> [0] [S800080] unprotecting 1b
[10001]-> [0] [S800080] unprotecting 1c
[10001]-> [0] [S800080] unprotecting 1d
[10001]-> [0] [S800080] unprotecting 1e
[10001]-> [0] [S800080] unprotecting 1f
[10001]-> [0] [S800080] unprotecting 20
[10001]-> [0] [S800080] unprotecting 21
[10001]-> [0] [S800080] unprotecting 22
[10001]-> [0] [S800080] unprotecting 23
[10001]-> [0] [S800080] unprotecting 24
[10001]-> [0] [S800080] unprotecting 25
[10001]-> [0] [S800080] unprotecting 26
[10001]-> [0] [S800080] unprotecting 27
[10001]-> [0] [S800080] unprotecting 28
[10001]-> [0] [S800080] unprotecting 29
[10001]-> [0] [S800080] unprotecting 2a
[10001]-> [0] [S800080] unprotecting 2b
[10001]-> [0] [S800080] unprotecting 2c
[10001]-> [0] [S800080] unprotecting 2d
[10001]-> [0] [S800080] unprotecting 2e
[10001]-> [0] [S800080] unprotecting 2f
[10001]-> [0] [S800080] unprotecting 30
[10001]-> [0] [S800080] unprotecting 31
[10001]-> [0] [S800080] unprotecting 32
[10001]-> [0] [S800080] unprotecting 33
[10001]-> [0] [S800080] unprotecting 34
[10001]-> [0] [S800080] unprotecting 35
[10001]-> [0] [S800080] unprotecting 36
[10001]-> [0] [S800080] unprotecting 37
[10001]-> [0] [S800080] unprotecting 38
[10001]-> [0] [S800080] unprotecting 39
[10001]-> [0] [S800080] unprotecting 3a
[10001]-> [0] [S800080] unprotecting 3b
[10001]-> [0] [S800080] unprotecting 3c
[10001]-> [0] [S800080] unprotecting 3d
[10001]-> [0] [S800080] unprotecting 3e
[10001]-> [0] [S800080] unprotecting 3f
[10001]-> [0] [S800080] unprotecting 40
[10001]-> [0] [S800080] unprotecting 41
[10001]-> [0] [S800080] unprotecting 42
[10001]-> [0] [S800080] Un-Protected 63 sectors
Erase Flash from 0x10020000 to 0x107fffff
sector 66 .... done
Erased 63 sectors
Copy to Flash... done
LCD driver (KS0713) initialized
Logo Flashing done !
dbox2-ppcboot>
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Wie schaut das Log nach den flashen aus?

Gruß Nachtvogel
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

wenn ich die box normal starte zeigt das log das an:

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ab.89.45.07.00.00-ba
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root.new/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root>

ist das nicht komisch?
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

und geb ich danach boot ein, so kommt das hier:

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ab.89.45.07.00.00-ba
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root.new/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root.new/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /root.new/platform/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/nokia-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/mpc8xx-dbox2/kernel/os failed

Flash-FS bootstrap loader (v1.5)

Flash superblock not ok: Block not allocated
boot flash /lost+found/root/platform/kernel/os failed
dbox2:root> boot
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.100, My IP 192.168.0.122
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_readflash
will verify ELF image, start= 0x800000, size= 207138
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Sep 19 2001 - 20:10:10)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-c3-d7
FLASH: 8 MB
Input: serial
Output: serial

anykey druecken um flash auslesen abzubrech 0
BOOTP broadcast 1
Bootp from server 192.168.0.100; our IP address is 192.168.0.122
Sending Flash over UDP
nochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoc
hmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochma
lnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalno
chmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochm
alnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmaln
ochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoch
malnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmal
nochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnoc
hmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochma
lnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmalnochmal
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

boot flash /root/platform/nokia-dbox2/kernel/os failed
Welches Image hast Du geflasht (genaue Bezeichnung)?

Gruß Nachtvogel
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

einmal das: alexW2xBaseimageV1.6.10
und dann hatte ich es auchmal mit dem flashen ohne nullmodemkabel
wie es dietmarW auf seiner seite stehen hat.
und zwar: 13 und ppcboot

gruß Jon
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Hallo!

1x oder 2x?
Für eine Nokia Box brauchst Du ein 2x
Ich würde Dir aber Yadi empfehlen.
http://www.yadi.org/
Für heute mache ich Schluß.

Gute Nacht
Nachtvogel
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06

Beitrag von gurgel »

Jon hat geschrieben:hab aber noch ein problem.
nachdem ich das flashen durch ist, zeigt die box nichts an. das display leutet nur grün.

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
Das Display ist enweder defekt oder nicht angeschlossen.

Um das Image auszulesen verwendest du am besten diese Methode:
http://www.dietmar-h.net/flash_read_de.html#rar

Um zu Flashen am besten, diese: http://wiki.tuxbox-cvs.sourceforge.net/ ... gassistent
Da wird dir auch angezeigt ob das Image für eine Box mir einem oder zwei Flashs ist.

Wenn danach die Box immer noch nicht bootet under dboxifa das Image für OK befunden hat, dann vermutlich der Flashspeicher defekt.
Test
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

hallo!

beim image auslesen wird mir das angezeigt:

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ab.89.45.07.00.00-ba
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0040

will verify ELF image, start= 0x800000, size= 153208
verify sig: 263
Branching to 0x40000


U-Boot 1.1.1 (TuxBox) (Sep 29 2004 - 01:20:48)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (jffs2) loading 'vmlinuz' to 0x100000
Scanning JFFS2 FS: . done.
### FS load complete: 626321 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626257 Bytes = 611.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.4) #11 Sa Okt 2
01:01:51 CEST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock3 rootfstype=squashfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:41:c3:d7
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 7 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (u-boot)"
0x00040000-0x000e0000 : "kernel (jffs2)"
0x000e0000-0x006a0000 : "root (squashfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'0) multi-
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.94 2004/07/03 01:18:36 carjay Exp $
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia60
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.47 2004/05/23 10:52:31 derget Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/ves1820.o
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.5 2004/08/21 09:05:31 mogway Exp $
Yadi Release vom 02.10.2004 00:53 - Image-Version 1.10.1.
Networkcfg eth0: 0.0.0.0/0.0.0.0 gw 0.0.0.0
Startmode: Bootmenu - SPTS:off - HWS:on
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
$Id: lcdip.cpp,v 1.3 2004/07/15 21:41:40 mogway Exp $
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06

Beitrag von gurgel »

Jon hat geschrieben:WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
http://www.dietmar-h.net/flashprob.html#boot_net_failed
Test
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Hallo!

Läuft die Box jetzt?

Gruß Nachtvogel
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

Hallo!

da bin ich wieder.
war ein paar tage verreist.

hab gerade das image, wie oben beschrieben drauf zu spielen.
dabei entstand dieses bootlog.
die box funktioniert jedoch trotzdem nicht. das Lcd bleibt nur grün.

kann mir da nochmal jemand helfen?

gruß Jon

kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root>
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.100, My IP 192.168.0.202
debug: Sending TFTP-request for file D/ppcboot90316/ppcboot_nullmodem
debug: Got Block #0050
debug: Got Block #0100
debug: Got Block #0150
debug: Got Block #0200
debug: Got Block #0250
debug: Got Block #0300
debug: Got Block #0350
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000


ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)

Initializing...
CPU: PPC823ZTnnB2 at 67 MHz: 2 kB I-Cache 1 kB D-Cache
Board: ### No HW ID - assuming TQM8xxL
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-41-c3-d7
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.0.100; our IP address is 192.168.0.202
Filename 'D/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: *##
done
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.0.100; our IP address is 192.168.0.202
Filename 'D/tftpboot/logo-fb'.
Load address: 0x120000
Loading: *####################################
done
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial

Select (1-3), other keys to stop autoboot: 0
'bootd' recursion detected

dbox2-ppcboot> bootp 120000 /tftpboot/flash.img

BOOTP broadcast 1
TFTP from server 192.168.0.100; our IP address is 192.168.0.202
Filename '/tftpboot/flash.img'.
Load address: 0x120000
Loading: *#############################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################################
done

dbox2-ppcboot> protect off 10020000 107FFFFF

...............................................................
Un-Protected 63 sectors

dbox2-ppcboot> erase 10020000 107FFFFF

Erase Flash from 0x10020000 to 0x107fffff

sector 4 ....
sector 5 ....
sector 6 ....
sector 7 ....
sector 8 ....
sector 9 ....
sector 10 ....
sector 11 ....
sector 12 ....
sector 13 ....
sector 14 ....
sector 15 ....
sector 16 ....
sector 17 ....
sector 18 ....
sector 19 ....
sector 20 ....
sector 21 ....
sector 22 ....
sector 23 ....
sector 24 ....
sector 25 ....
sector 26 ....
sector 27 ....
sector 28 ....
sector 29 ....
sector 30 ....
sector 31 ....
sector 32 ....
sector 33 ....
sector 34 ....
sector 35 ....
sector 36 ....
sector 37 ....
sector 38 ....
sector 39 ....
sector 40 ....
sector 41 ....
sector 42 ....
sector 43 ....
sector 44 ....
sector 45 ....
sector 46 ....
sector 47 ....
sector 48 ....
sector 49 ....
sector 50 ....
sector 51 ....
sector 52 ....
sector 53 ....
sector 54 ....
sector 55 ....
sector 56 ....
sector 57 ....
sector 58 ....
sector 59 ....
sector 60 ....
sector 61 ....
sector 62 ....
sector 63 ....
sector 64 ....
sector 65 ....
sector 66 .... done
Erased 63 sectors

dbox2-ppcboot> cp.l 120000 10020000 1F8000

Copy to Flash... done

dbox2-ppcboot>
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Intel(R) PRO/100+ Management Adapter (0)
IP-Adresse des Netzwerkadapters: 192.168.0.100
IP-Adresse die die dbox bekommt: 192.168.0.202
Betriebssystem: Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
DBOX-IFA Version: 1.5.9
------ Powered by http://www.dboxservice-hallenberg.de ------
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06

Beitrag von gurgel »

Jon hat geschrieben: debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
Das Display ist defekt. Mach doch mal ein Bootlog mit dem dbox2-Bootmanager (nur Comport).
Test
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

das ist das bootlog (nur comport)

wird demnacht das display defekt sein oder?

wenn ja, ist des dann nur das display und kann man denn nicht die box auch ohne display zum laufen bringen?


kdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: LCD init error -1
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-ab.89.45.07.00.00-ba
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 146452
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) (Jul 21 2003 - 20:18:06)

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
...............................................................
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 578563 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 578499 Bytes = 564.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.21-dbox2 (von alexW) Wer Kernels nachmacht, oder faelscht, wir
d bestraft ;-) #1 Mon Jul 21 15:54:27 CEST 2003
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 console=ttyS0
Decrementer Frequency = 252000000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30948k available (1008k kernel code, 352k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:41:c3:d7
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'Using /lib/modules/2.4.2
1-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.21-dbox2/misc/event.o
event: init ...
Using /lib/modules/2.4.21-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.21-dbox2/misc/dbox2_fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.21-dbox2/misc/dbox2_fp_input.o
[1] 22
Using /lib/modules/2.4.21-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
[lcdip] found: mID(1) / Avia(0)
[lcdip] Bootmanager IP gefunden.
gurgel
Tuxboxer
Tuxboxer
Beiträge: 2473
Registriert: Dienstag 8. Oktober 2002, 21:06

Beitrag von gurgel »

Das Display ist jetzt schon defekt.

die Box fordert nun die IP-Adresse, die unglücklicherweise nur auf dem Display angezeigt wird.
Soweit ich weis, muss du da einfach ok drücken (IP hat er schon vom Bootmanager) und dann die ucodes uploaden.
Test
Nachtvogel
Tuxboxer
Tuxboxer
Beiträge: 4391
Registriert: Freitag 21. Mai 2004, 17:16

Beitrag von Nachtvogel »

Hallo!

Welches Image hast Du auf der Box?
Bei Yadi wird nach drei mal OK drücken die IP 192.168.0.3 gesetzt.
Bei JtG wird nach drei mal OK drücken die IP 192.168.0.202 gesetzt.

Gruß Nachtvogel
Jon
Interessierter
Interessierter
Beiträge: 42
Registriert: Freitag 7. Mai 2004, 17:17

Beitrag von Jon »

Hi!

jo,das display ist defekt.

hab das yadi image drauf. hab es mit deinem tip hinbekommen.

danke meister ;-)