Box bleibt hängen HW defekt?

[Nachtvogel]

Hallo!

Seit langem habe ich mal wieder einen Hänger.
Ich habe eine Nokia Avia 500er Box.
UCodes:
avia500.ux: avia500v110
cam-alpha.bin: cam_01_02_105E
ucode.bin: ucode_0014
Karte P02

Zufällig habe ich ein Log mitlaufen lassen.

Gruß Nachtvogel

.
.
.
[CPlugins] exec done...
/dev/input/event1: No such file or directory
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 0032
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0032 status: 1d1d
avia_gt_dmx: queue 31 overflow (count: 1)
avia_gt_dmx: queue 31 overflow (count: 1)
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 002a
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 002a status: 1d1d
PES, queue 0 normal.
[camd] starting onid 0001 sid 0201
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0201 status: 1d86
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 0309
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0309 status: 5050
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 0298
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0298 status: 5052
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 000f
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 000f status: 1d1d
PES, queue 0 normal.
avia_gt_core: masking unhandled irq reg 1 bit 15
[controld] VIDEO_EVENT_SIZE_CHANGED 720x576 (4:3 -> 4:3)
avia_gt_dmx: queue 31 overflow (count: 1)
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
PES, queue 0 normal.
error while loading palette: /share/tuxbox/neutrino/icons/scan.pal
error while loading icon: /share/tuxbox/neutrino/icons/scan.raw
[zapit] scan mode fast
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
error while loading palette: /share/tuxbox/neutrino/icons/scan.pal
error while loading icon: /share/tuxbox/neutrino/icons/scan.raw
[zapit] scan mode full
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
error while loading palette: /share/tuxbox/neutrino/icons/scan.pal
error while loading icon: /share/tuxbox/neutrino/icons/scan.raw
[zapit] scan mode full
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 0024
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0024 status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 480x576 (4:3 -> 4:3)
avia_gt_dmx: queue 31 overflow (count: 1)
[CPlugins] (id,val):(end_y,537)
[CPlugins] (id,val):(end_x,671)
[CPlugins] (id,val):(off_y,11)
[CPlugins] (id,val):(off_x,32)
[CPlugins] (id,val):(video_format,2)
[CPlugins] (id,val):(rcblk_rep,200)
[CPlugins] (id,val):(rcblk_anf,200)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
[TuxCal 0.41]
[TuxCal] <Font "/share/fonts/pakenham.ttf" loaded>
[CPlugins] exec done...
[CPlugins] (id,val):(end_y,537)
[CPlugins] (id,val):(end_x,671)
[CPlugins] (id,val):(off_y,11)
[CPlugins] (id,val):(off_x,32)
[CPlugins] (id,val):(video_format,2)
[CPlugins] (id,val):(rcblk_rep,200)
[CPlugins] (id,val):(rcblk_anf,200)
[CPlugins] (id,val):(fd_rcinput,18)
[CPlugins] (id,val):(fd_framebuffer,3)
[CPlugins] try exec...
[TuxCal 0.41]
[TuxCal] <Font "/share/fonts/pakenham.ttf" loaded>
[CPlugins] exec done...
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 000b
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 000b status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 4:3)
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 16:9)
avia_gt_core: masking unhandled irq reg 1 bit 14
PES, queue 0 normal.
[camd] starting onid 0001 sid 002b
descramble onid: 0001 sid: 002b status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (16:9 -> 4:3)
PES, queue 0 normal.
[camd] starting onid 0001 sid 000a
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 16:9)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)
.
.
.

[DieMade]

Ich sags ja ungern, aber Meldungen über I2C-Fehler deuten fast immer auf einen HW-Defekt hin - das muß nicht zwingend der AVS sein, prinzipiell kann jedes Gerät am I2C den Bus blockieren.

[Nachtvogel]

Danke DieMade
Es kommt aber äußerst selten vor, daß meine Box hängen bleibt.
Neustart und alles wieder OK.
Mal sehen ob das nächste mal das gleiche im Log steht, ich versuch mal
den Bootmanager immer mitlaufen zu lassen.

Gruß Nachtvogel

[Nachtvogel]

Hallo!

Eben hat meine Box von selbst einen Restart gemacht, am Log kann ich nichts erkennen.
Vielleicht jemand anders

Gruß Nachtvogel

[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 0032
[camd] set emm caid 1702 capid 1000
descramble onid: 0001 sid: 0032 status: 1d1d
avia_gt_dmx: queue 31 overflow (count: 1)
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-1e.47.25.07.00.00-46
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 158620
verify sig: 263
Branching to 0x40000


U-Boot 1.1.1 (TuxBox) (Oct 26 2004 - 21:58:41)

CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .. .
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 625823 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 625759 Bytes = 611.1 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.27-dbox2 (ImageTeam@yadi.org) (gcc version 3.3.5) #8 Di Dez 21
20:49:18 CET 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfs
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30908k available (1064k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:19:13:5f
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00680000 : "root (squashfs)"
0x00680000-0x007e0000 : "var (jffs2)"
0x007e0000-0x00800000 : "flfs (u-boot)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'ti-call b
Using /lib/modules/2.4.27-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.27-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.27-dbox2/misc/avs.o
Using /lib/modules/2.4.27-dbox2/misc/saa7126.o
Detected STB:
Vendor: Nokia
Model: D-BOX2
Using /lib/modules/2.4.27-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.27-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.27-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.27-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.98 2004/11/21 20:33:38 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters enabled.
avia_gt_core: masking unhandled irq reg 0 bit 6
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.27-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Using /lib/modules/2.4.27-dbox2/misc/cable_ves1820.o
insmod: Warning: kernel-module version mismatch
/lib/modules/2.4.27-dbox2/misc/cable_ves1820.o was compiled for kernel v
ersion 2.4.25-dbox2
while this kernel is version 2.4.27-dbox2
DVB: VES1820(0): pwm=0x48
DVB: registering frontend 0:0 (VES1820 based DVB-C frontend)...
Using /lib/modules/2.4.27-dbox2/misc/ves1x93.o
Using /lib/modules/2.4.27-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
Using /lib/modules/2.4.27-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.202 2004/06/24 00:26:58 carjay Exp $
Using /lib/modules/2.4.27-dbox2/kernel/net/sunrpc/sunrpc.o
$Id: chkIVersion.cpp,v 1.5 2004/08/21 09:05:31 mogway Exp $
Yadi Snapshot vom 21.12.2004 20:44 - Image-Version 2.0.0.6
Networkcfg eth0: 192.168.0.1/255.255.255.0 gw 192.168.0.1
Startmode: Bootmenu - SPTS:off - HWS:on
Using /lib/modules/2.4.27-dbox2/kernel/fs/lockd/lockd.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/nfs/nfs.o
Using /lib/modules/2.4.27-dbox2/kernel/fs/cifs/cifs.o
Starting pid 93, console /dev/console: '/etc/init.d/start'

Please press Enter to activate this console. [LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Scriptbeginn
$Id: sectionsd.cpp,v 1.179 2004/09/10 11:36:00 thegoodguy Exp $
caching 504 hours
events are old 180min after their end time
[camd] ca system id: 1702
[camd] set emm caid 1702 capid 1000
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: zapit.cpp,v 1.357 2004/10/27 16:08:42 lucgas Exp $
[zapit] PMT update enabled
avia_gt_core: masking unhandled irq reg 0 bit 7
[camd] no card is in slot #2
[camd] a card is in slot #1
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix15/Bold)
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[camd] set emm caid 1702 capid 1000
PES, queue 0 normal.
[camd] starting onid 0001 sid 000a
[camd] set emm caid 1702 capid 1000
[neutrino] initialized everything
descramble onid: 0001 sid: 000a status: 1d1d
[controld] VIDEO_EVENT_SIZE_CHANGED 704x576 (4:3 -> 16:9)

[DieMade]

Stimmt, da ist nix besonderes zu sehen - sehr merkwürdig

[Nachtvogel]

Hallo!

Bei meiner Nokia Avia500 hat der abgeschaltete Watchdog nicht so richtig funktioniert.

[AVS] i2c error -121
fp_cmd: i2c_transfer error (ret == -121)
fp_cmd: i2c_transfer error (ret == -121)

Laut DieMade ein HW defekt.
Watchdog ist jetzt wieder eingeschaltet, keine Abstürze mehr.
Nur einen Neustart ohne Grund hat meine Box gemach (siehe Log oben)

Gruß Nachtvogel

[Npq]

debug: WATCHDOG RESET

Doch, der Grund war, daß der Kernel hängengeblieben ist und nichts mehr ging, so daß der CPU-Watchdog zugeschlagen hat.

Also deutet immer noch auf einen Hardwarefehler hin.

[Nachtvogel]

debug: WATCHDOG RESET

Doch, der Grund war, daß der Kernel hängengeblieben ist und nichts mehr ging, so daß der CPU-Watchdog zugeschlagen hat.

Also deutet immer noch auf einen Hardwarefehler hin.

Der Grund wofür?
Den ersten Hänger der Box oder der Neustart der Box?
Was bedeutet debug: WATCHDOG RESET?
Läuft bei mit der Watchdog gar nicht, egal ob ein oder ausgeschaltet?
Fragen über Fragen

Gruß Nachtvogel

[DieMade]

"debug: WATCHDOG RESET" bedeutet, daß der Hardware-Watchdog der CPU zugeschlagen und diese neu gestartet hat - das hat nix mit dem AVIA-WD zu tun.

[Nachtvogel]

Dank Dir
In meinem Log ist immer wieder folgendes zu finden.

avia_av_wdt_thread: video decoding stopped ==> restart

Was bedeutet das?


Egal ob meine Box einen HW defekt hat oder nicht, sie bleibt sehr selten hängen und andere Probleme habe ich auch nicht.
Wenn ich da von so manch anderen Boxen lese, die andauernd hängen bleiben, hab ich es doch gut

Gruß Nachtvogel

[DieMade]

avia_av_wdt_thread: video decoding stopped ==> restart

Genau das ist der Avia-Watchdog

[mash4077]

Egal ob meine Box einen HW defekt hat oder nicht, sie bleibt sehr selten hängen und andere Probleme habe ich auch nicht.

Hi Nachtvogel,

bedeutet das, dass Dein Problem (bzw. der Fehler Deiner Box) nicht auf das Thread-Topic zutrifft?

Wenn ja, kannst Du es bitte separieren?

Gruß
mash

[Nachtvogel]

Hallo mash4077!

Ich bin mir nicht sicher.
Hab jetzt das Yadi 2.0.0.7 auf meiner Box, bis jetzt sind keine Fehler aufgetreten.
Der Fehler debug: WATCHDOG RESET steht seit dem Update auch nicht mehr im Log.
Folgende debug Meldungen bekomme ich jetzt beim booten:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-1e.47.25.07.00.00-46
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot

Gruß Nachtvogel

[mash4077]

Hast Du denn grundsätzlich auch das Problem, dass Deine Box bei der Verwendung eines z.B. YADI nach etwa 12h stehen bleibt?

Gruß
mash

[Nachtvogel]

Nein, meine Box läuf vom morgens bis in die Nacht ohne hängen zu bleiben.

[mash4077]

Okay, dann muss ich leider sagen: raus mit Dir!

Gruß
mash

[Nachtvogel]

OK, bin raus
Jetzt ist der andere Thread wieder saber

Gruß Nachtvogel

[mash4077]

Vielen Dank!

Gruß
mash