ich habe schon die Suchfunktion benutzt, habe aber ein anderes Problem als beschrieben.
ich habe eine Dbox2 von Nokia (Debug Modus)
Problem:
Ich verwende schon länger das selbe Image (weiß nicht genau wies heißt) und alles funzte auch. Doch plötzlich beim einschalten hängt sich die Box bei "Loading Kernel" auf, obwohl ich keine Software, Updates, etc. eingspielt habe.
Ich habe dann mehrere Image über den Bootmanager eingespielt was auch funktionierte, doch beim einschalten, das selbe Problem.
Die Box bleibt immer bei "Loading Kernel" stehen.
Habe schon ein paar verschieden Images probiert, kein Erfolg.
Natürlich auch beim Neustart die Kabel abgezogen.
Was kann das sein, ist die Box defekt, etc?
Hier noch 3 Infos vom Bootloader:
1) Beim Image Flashen:
(Habe nur ein paar unwichtige einträge zur Sicherheit mit xxxxx ersetzt!)
}debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-xxxxxxxxxxxxx
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.5.20, My IP 192.168.5.22
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
will verify ELF image, start= 0x800000, size= 201596
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
ppcboot 0.6.4 (Apr 11 2002 - 16:10:44)
Initializing...
CPU: xxxxxxxxxx at 67 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: ### No HW ID - assuming xxxxxxxx
DRAM: (faked) 32 MB
Ethernet: 00-50-9c-1e-43-9a
FLASH: 8 MB
LCD driver (KS0713) initialized
BOOTP broadcast 1
TFTP from server 192.168.5.20; our IP address is 192.168.5.22
Filename 'C/Programme/tftpboot/logo-lcd'.
Load address: 0x130000
Loading: ##
LCD logo at: 0x130000 (0x1F9FFC0 bytes)
BOOTP broadcast 1
TFTP from server 192.168.5.20; our IP address is 192.168.5.22
Filename 'C/Programme/tftpboot/logo-fb'.
Load address: 0x120000
Loading: #########
FB logo at: 0x0 (0x1FC0000 bytes)
AVIA Frambuffer
Input: serial
Output: serial
1: Console on ttyS0
2: Console on null
3: Console on framebuffer
Select (1-3), other keys to stop autoboot: 0
dbox2-ppcboot> bootp 120000 /C/dbox2/2x_Neutrino.img
BOOTP broadcast 1
TFTP from server 192.168.5.20; our IP address is 192.168.5.22
Filename '/C/dbox2/2x_Neutrino.img'.
Load address: 0x120000
Loading: #######################################################################
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
###########################################################################
#####
######################
dbox2-ppcboot> protect off 10020000 107fffff
...............................................................
Un-Protected 63 sectors
dbox2-ppcboot> erase 10020000 107fffff
Erase Flash from 0x10020000 to 0x107fffff
sector 66 ....
Erased 63 sectors
dbox2-ppcboot> cp.l 120000 10020000 1F8000
Copy to Flash...
dbox2-ppcboot>
2) Bootlog von einem normalen Bootvorgang:
Un-Protected 63 sectors
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 602492 bytes loaded to 0x100000
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 602428 Bytes = 588.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.25-dbox2 (vom Jtg-Team) (gcc version 3.3.3) #1 Mon Mar 15 21:
48:41 CET 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x1000)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30924k available (1020k kernel code, 364k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (2002081 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1e:43:9a
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00720000 : "root (cramfs)"
0x00720000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS') multi-c
ifup: /etc/network/interfaces: No such file or directory
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
kernel BUG at page_alloc.c:235!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0029CBC XER: 00000000 LR: C0029CBC SP: C1D49DA0 REGS: c1d49cf0 TRAP: 1000
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1d48000[24] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: C0029CBC C1D49DA0 C1D48000 00000020 00001032 00000001 00000AEE C01244D3
GPR08: 00000000 C0140000 00000002 C1D49CB0 C0140000 00000000 00000000 00000000
GPR16: 00000000 00000000 C0142420 C0142420 C0140000 C0100000 C0100000 00000001
GPR24: BA2E8BA3 00000000 00001C99 C011C95C 00000000 00000001 C011C994 C01C2A54
Call backtrace:
C0029CBC C002A08C C0029CE8 C001D144 C001D264 C0009574 C00027C8
00000008 30008DE0 300037F0 3000C4B8 30002808 30002770 3000DA6C
Oops: kernel access of bad area, sig: 11
NIP: C0029804 XER: 00000000 LR: C00296D0 SP: C1D49B20 REGS: c1d49a70 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000000, DSISR: 0000092B
TASK = c1d48000[24] 'insmod' Last syscall: 6
last math 00000000 last altivec 00000000
GPR00: 00000000 C1D49B20 C1D48000 00000001 00009032 7FFFF000 C01C2A18 00000080
GPR08: 00001C96 00000000 00000000 00000000 00000000 00000000 00000000 00000000
GPR16: 00000000 00000000 C0142420 C0140000 C011CA0C C0100000 BA2E8BA3 C0100000
GPR24: C0174008 C01C29FC 00000E4B 00001C97 C011C994 C011C95C FFFFFFFE C01C29D0
Call backtrace:
C00295E4 C002AB50 C001B9B4 C001D668 C001BCD4 C001EE24 C000D404
C00127A0 C0002954 C0003004 C00027C8 C0029CBC C002A08C C0029CE8
C001D144 C001D264 C0009574 C00027C8
Segmentation fault
[i2c-8xx]: mpc 8xx i2c init
i2c-dev.o: Registered 'PowerPC 8xx I2C adapter' as minor 0
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
i2c-core.o: driver DBox2 Frontprocessor driver registered.
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [CXA2092] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
cam: no firmware file found
/lib/modules/2.4.25-dbox2/misc/dvb_i2c_bridge.o: /lib/modules/2.4.25-dbox2/misc/
dvb_i2c_bridge.o: unresolved symbol dvb_register_i2c_bus
/lib/modules/2.4.25-dbox2/misc/dvb_i2c_bridge.o: /lib/modules/2.4.25-dbox2/misc/
dvb_i2c_bridge.o: unresolved symbol dvb_unregister_i2c_bus
/lib/modules/2.4.25-dbox2/misc/avia_napi.o: /lib/modules/2.4.25-dbox2/misc/avia_
napi.o: unresolved symbol dvb_register_adapter
/lib/modules/2.4.25-dbox2/misc/avia_napi.o: /lib/modules/2.4.25-dbox2/misc/avia_
napi.o: unresolved symbol dvb_i2c_bridge_register
/lib/modules/2.4.25-dbox2/misc/avia_napi.o: /lib/modules/2.4.25-dbox2/misc/avia_
napi.o: unresolved symbol dvb_i2c_bridge_unregister
/lib/modules/2.4.25-dbox2/misc/avia_napi.o: /lib/modules/2.4.25-dbox2/misc/avia_
napi.o: unresolved symbol dvb_unregister_adapter
/lib/modules/2.4.25-dbox2/misc/cam_napi.o: /lib/modules/2.4.25-dbox2/misc/cam_na
pi.o: unresolved symbol dvb_register_device
/lib/modules/2.4.25-dbox2/misc/cam_napi.o: /lib/modules/2.4.25-dbox2/misc/cam_na
pi.o: unresolved symbol dvb_generic_release
/lib/modules/2.4.25-dbox2/misc/cam_napi.o: /lib/modules/2.4.25-dbox2/misc/cam_na
pi.o: unresolved symbol dvb_generic_ioctl
/lib/modules/2.4.25-dbox2/misc/cam_napi.o: /lib/modules/2.4.25-dbox2/misc/cam_na
pi.o: unresolved symbol dvb_unregister_device
/lib/modules/2.4.25-dbox2/misc/cam_napi.o: /lib/modules/2.4.25-dbox2/misc/cam_na
pi.o: unresolved symbol dvb_generic_open
/lib/modules/2.4.25-dbox2/misc/cam_napi.o: /lib/modules/2.4.25-dbox2/misc/cam_na
pi.o: unresolved symbol avia_napi_get_adapter
/lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o: /lib/modules/2.4.25-dbox2/misc/d
box2_fp_napi.o: unresolved symbol dvb_add_frontend_ioctls
/lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o: /lib/modules/2.4.25-dbox2/misc/d
box2_fp_napi.o: unresolved symbol avia_napi_get_adapter
/lib/modules/2.4.25-dbox2/misc/dbox2_fp_napi.o: /lib/modules/2.4.25-dbox2/misc/d
box2_fp_napi.o: unresolved symbol dvb_remove_frontend_ioctls
avia_av: $Id: avia_av_core.c,v 1.88 2004/02/23 22:43:46 carjay Exp $
avia_av_core.c: avia_av_firmware_read: Unable to load '/var/tuxbox/ucodes/avia50
0.ux'.
avia_av: microcode not found, setting up dummy
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.44 2003/12/22 05:31:39 obi Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.202 2004/03/06 22:28:35 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_dmx: loaded ucode v0014
avia_gt_dmx: hw section filters enabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.37 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Oops: Exception in kernel mode, sig: 7
NIP: C002A3F4 XER: 20000000 LR: C0010574 SP: C1CB5E90 REGS: c1cb5de0 TRAP: 0600
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: C01C4D21, DSISR: 00010800
TASK = c1cb4000[52] 'insmod' Last syscall: 128
last math 00000000 last altivec 00000000
GPR00: 000000FF C1CB5E90 C1CB4000 C01C4D0D 00000000 00000001 C38A3000 C3B1C794
GPR08: C01CC330 C01C4D21 00000000 00000000 82008042 100375EC 00000000 00000000
GPR16: 00000001 10030000 10030000 00000000 00009032 100430AC C1C11000 C1CB5EA0
GPR24: C1C06220 0000000A C389F000 FFFFFFEA C0120000 C0120000 C3B1C788 C3B1B000
Call backtrace:
C0010568 C000257C 10040D18 10003804 10004B1C 1000839C 10008588
0FF48C40 00000000
Bus error
kernel BUG at page_alloc.c:235!
Oops: Kernel Mode Software FPU Emulation, sig: 8
NIP: C0029CBC XER: 00000000 LR: C0029CBC SP: C1CB5DE0 REGS: c1cb5d30 TRAP: 1000
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
TASK = c1cb4000[53] 'insmod' Last syscall: 3
last math 00000000 last altivec 00000000
GPR00: C0029CBC C1CB5DE0 C1CB4000 00000020 00001032 00000001 00001CB1 C01244D3
GPR08: 00000000 C0140000 00000002 C1CB5CF0 C0140000 100375EC 00000000 00000000
GPR16: 00000001 C0140000 C00213F0 C0142420 C0140000 C0100000 C0100000 00000001
GPR24: BA2E8BA3 00000000 00001BF4 C011C95C 00000000 00000001 C011C994 C01C0DF8
Call backtrace:
C0029CBC C002A08C C0029CE8 C002106C C0021560 C00305A8 C000257C
00000000 10004304 1000839C 10008588 0FF48C40 00000000
Floating point exception
Oops: kernel access of bad area, sig: 11
NIP: C0027D40 XER: 20000000 LR: C0027508 SP: C1CB5C10 REGS: c1cb5b60 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 00000004, DSISR: 00000909
TASK = c1cb4000[54] 'insmod' Last syscall: 11
last math 00000000 last altivec 00000000
GPR00: 00000000 C1CB5C10 C1CB4000 C01C0980 80000000 00000000 30022FFC C01C0988
GPR08: C01C0E50 00000000 C01C1110 C011C9A0 24008042 1005D878 1002EFF8 C1F245F0
GPR16: FFFF0001 C1F83C60 00000000 C1CB5F50 10000000 00000001 00000002 C1F24660
GPR24: 00000000 C1F83D60 00000000 C1CB5C40 1002E000 44008042 C1C06300 C1C06300
Call backtrace:
C1F83D60 C00509E0 C003A960 C003AB80 C00054A0 C000257C 00000000
Segmentation fault
Oops: kernel access of bad area, sig: 11
NIP: C00260A0 XER: 00000000 LR: C0026054 SP: C1CB5EA0 REGS: c1cb5df0 TRAP: 0300
Not tainted
MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 3C600004, DSISR: 0000012A
TASK = c1cb4000[55] 'insmod' Last syscall: 127
last math 00000000 last altivec 00000000
GPR00: C38A1000 C1CB5EA0 C1CB4000 00000020 00001032 C1CB5F18 C1C062EC FDFFE000
GPR08: 00000020 7C050000 3C600000 C389F000 84004022 100375EC 00000000 00000000
GPR16: 00000001 10030000 10030000 00000000 00009032 01CB5F40 00000000 C00027C8
GPR24: C0002520 000001F2 000001E5 00000D58 0000000B 00000D58 00000002 00002000
Call backtrace:
C0026054 C0026220 C000FE1C C000257C 10004994 1000839C 10008588
0FF48C40 00000000
Segmentation fault
/etc/init.d/init2: 13: /sbin/insmod: Cannot allocate memory
/etc/init.d/init2: 15: /bin/tuxinfo: Cannot allocate memory
/etc/init.d/init2: 32: [: Cannot allocate memory
/etc/init.d/init2: 32: [: Cannot allocate memory
/etc/init.d/init2: 32: [: Cannot allocate memory
/etc/init.d/init2: 32: echo: Cannot allocate memory
/etc/init.d/init2: 32: halt: Cannot allocate memory
/etc/init.d/init2: 34: /sbin/insmod: Cannot allocate memory
/etc/init.d/init2: 40: [: Cannot allocate memory
/etc/init.d/init2: 40: /sbin/insmod: Cannot allocate memory
/etc/init.d/rcS: 31: [: Cannot allocate memory
/etc/init.d/rcS: 40: [: Cannot allocate memory
/etc/init.d/rcS: 55: [: Cannot allocate memory
/etc/init.d/rcS: 55: test: Cannot allocate memory
/etc/init.d/rcS: 55: test: Cannot allocate memory
/etc/init.d/rcS: 55: test: Cannot allocate memory
Oops: kernel access of bad area, sig: 11
NIP: C0029710 XER: 00000000 LR: C00296D0 SP: C1DCFDB0 REGS: c1dcfd00 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 80000074, DSISR: 00018128
TASK = c1dce000[9] 'init' Last syscall: 1
last math 00000000 last altivec 00000000
GPR00: 00000000 C1DCFDB0 C1DCE000 00000001 00009032 7FFFF000 C01C5CCC 00000080
GPR08: 80000000 C01C5AF8 00000000 00000074 00000000 1005D878 00000000 00000000
GPR16: 00000000 00000000 C0142420 C0140000 C011CA0C C0100000 BA2E8BA3 C0100000
GPR24: C0174008 C01C5CB0 000003B7 00001DBC C011C9AC C011C95C FFFFFFFC C01C5C58
Call backtrace:
C00295E4 C002AB50 C001B9B4 C001D668 C001BCD4 C001EE24 C000D404
C00127A0 C0012A68 C000257C
Starting pid 72, console /dev/console: '/etc/init.d/start'
Bummer, could not run '/etc/init.d/start': No such file or directory
Oops: kernel access of bad area, sig: 11
NIP: C0029710 XER: 00000000 LR: C00296D0 SP: C1DB5DB0 REGS: c1db5d00 TRAP: 0300
Not tainted
MSR: 00001032 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DAR: 80000074, DSISR: 00018128
TASK = c1db4000[78] 'init' Last syscall: 1
last math 00000000 last altivec 00000000
GPR00: 00000000 C1DB5DB0 C1DB4000 00000001 00009032 7FFFE000 C01C5E84 00000080
GPR08: 80000000 C01C4BD8 00000000 00000074 00000000 1005D878 00000000 00000000
GPR16: 00000000 00000000 C0142420 C0140000 C011CA0C C0100000 BA2E8BA3 C0100000
GPR24: C0174008 C01C5E68 000003B9 00001DC8 C011C9AC C011C95C FFFFFFFC C01C5EC0
Call backtrace:
C00295E4 C002AB50 C001B9B4 C001D668 C001BCD4 C001EE24 C000D404
C00127A0 C0012A68 C000257C 100114DC 100118D4 100124E8 10003C94
100038D8 0FEFCC40 00000000
Bummer, can't open /dev/vc/2te this console.
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/2
Bummer, can't open /dev/vc/3
das zum schluß kommt immer wieder (schleife)
3) Speichertest:
}debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-cb.81.19.07.00.00-8d
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: &_text 0x10000, &_etext 0x26160, &_data 0x26160, &_edata 0x29c50
debug: &_end 0x347dc, &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest: debug: passed
dbox2:root>
Bitte um Hilfe!
Danke
joe9999
