Was ist an dieser Box defekt ? Bitte um Hilfe

Boxenweitwurf
uhwahl
Neugieriger
Neugieriger
Beiträge: 13
Registriert: Freitag 9. August 2002, 21:01

Was ist an dieser Box defekt ? Bitte um Hilfe

Beitrag von uhwahl »

Hallo! Ein Bekannter von mir hatte an seiner Box rumgebastelt und nun ist sie defekt. Sie bootet noch, schaltet aber dann plötzlich ab. Flashen läßt sie sich auch noch, aber selber phänomen. Es handelt sich um eine Nokia D-Box2 Sat mit AVIA 600 und 2xIntel Flash. Hier ein Bootlog. Es wäre nett, wenn mir jemand einen Tip geben könnnte! Vielen Dank im Voraus !

debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 156572
verify sig: 263
Branching to 0x40000


U-Boot 1.1.1 (TuxBox) (Jun 19 2004 - 11:01:13)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: . done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (cramfs) loading 'vmlinuz' to 0x100000
### FS load complete: 610717 bytes loaded to 0x100000
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 610653 Bytes = 596.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.26-dbox2 (vom Jtg-Team) (gcc version 3.3.3) #1 Sat Jun 19 11:
02:48 CEST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 rootfstype=cramfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Warning: real time clock seems stuck!
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30904k available (1036k kernel code, 368k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:43:75:37
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x006a0000 : "root (cramfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
Starting pid 10, console /dev/console: '/etc/init.d/rcS'0) multi-
Using /lib/modules/2.4.26-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.26-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.26-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.26-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.26-dbox2/misc/dbox2_fp.o
Using /lib/modules/2.4.26-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.26-dbox2/misc/avs.o
Using /lib/modules/2.4.26-dbox2/misc/saa7126.o
Using /lib/modules/2.4.26-dbox2/misc/cam.o
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
Using /lib/modules/2.4.26-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.26-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
Using /lib/modules/2.4.26-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.26-dbox2/misc/dbox2_fp_napi.o
Using /lib/modules/2.4.26-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.92 2004/05/31 15:34:34 carjay Exp $
avia_av: microcode verify: 25293 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (82098309)
insmod: init_module: avia_av: Input/output error
Using /lib/modules/2.4.26-dbox2/misc/avia_gt.o
insmod: unresolved symbol avia_av_set_stc
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_fb.o
insmod: unresolved symbol avia_gt_gv_copyarea
insmod: unresolved symbol avia_gt_gv_show
insmod: unresolved symbol avia_gt_gv_get_clut
insmod: unresolved symbol avia_gt_gv_get_blevel
insmod: unresolved symbol avia_gt_gv_set_input_size
insmod: unresolved symbol avia_gt_gv_set_pos
insmod: unresolved symbol avia_gt_gv_hide
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_gv_set_size
insmod: unresolved symbol avia_gt_gv_set_input_mode
insmod: unresolved symbol avia_gt_gv_set_clut
insmod: unresolved symbol avia_gt_gv_set_blevel
insmod: unresolved symbol avia_gt_gv_get_info
Using /lib/modules/2.4.26-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_lirc.o
insmod: unresolved symbol avia_gt_ir_exit
insmod: unresolved symbol avia_gt_ir_receive_pulse
insmod: unresolved symbol avia_gt_ir_receive_data
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_write_position
insmod: unresolved symbol avia_gt_ir_send_buffer
insmod: unresolved symbol avia_gt_ir_queue_pulse
insmod: unresolved symbol avia_gt_ir_init
insmod: unresolved symbol avia_gt_ir_set_duty_cycle
insmod: unresolved symbol avia_gt_ir_set_frequency
insmod: unresolved symbol avia_gt_ir_get_rx_buffer_read_position
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_oss.o
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pcm_play_buffer
insmod: unresolved symbol avia_gt_pcm_stop
insmod: unresolved symbol avia_gt_pcm_set_signed
insmod: unresolved symbol avia_gt_pcm_set_endian
insmod: unresolved symbol avia_gt_pcm_set_rate
insmod: unresolved symbol avia_gt_pcm_set_width
insmod: unresolved symbol avia_gt_pcm_poll
insmod: unresolved symbol avia_gt_pcm_set_channels
insmod: unresolved symbol avia_av_get_sample_rate
insmod: unresolved symbol avia_gt_pcm_set_pcm_attenuation
insmod: unresolved symbol avia_gt_pcm_get_block_size
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_v4l2.o
insmod: unresolved symbol avia_gt_pig_show
insmod: unresolved symbol avia_gt_pig_set_stack
insmod: unresolved symbol avia_gt_pig_set_size
insmod: unresolved symbol avia_gt_pig_set_pos
insmod: unresolved symbol avia_gt_pig_hide
Using /lib/modules/2.4.26-dbox2/misc/ves1820.o
Using /lib/modules/2.4.26-dbox2/misc/ves1x93.o
DVB: registering frontend 0:0 (VES1893)...
Using /lib/modules/2.4.26-dbox2/misc/avia_av_napi.o
insmod: unresolved symbol avia_av_stream_type_set
insmod: unresolved symbol avia_av_register_video_event_handler
insmod: unresolved symbol avia_av_set_audio_attenuation
insmod: unresolved symbol avia_av_write
insmod: unresolved symbol avia_av_pid_set
insmod: unresolved symbol avia_av_audio_pts_to_stc
insmod: unresolved symbol avia_gt_dmx_queue_write
insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
insmod: unresolved symbol avia_av_play_state_set_video
insmod: unresolved symbol avia_av_unregister_video_event_handler
insmod: unresolved symbol avia_av_get_video_size
insmod: unresolved symbol avia_av_play_state_set_audio
insmod: unresolved symbol avia_av_read
insmod: unresolved symbol avia_gt_pcm_set_mpeg_attenuation
insmod: unresolved symbol avia_av_new_audio_config
insmod: unresolved symbol avia_av_set_video_system
insmod: unresolved symbol avia_av_bypass_mode_set
insmod: unresolved symbol avia_av_sync_mode_set
insmod: unresolved symbol avia_gt_dmx_queue_nr_get_bytes_free
Using /lib/modules/2.4.26-dbox2/misc/avia_gt_napi.o
insmod: unresolved symbol avia_gt_dmx_get_ucode_info
insmod: unresolved symbol avia_gt_vbi_start
insmod: unresolved symbol avia_gt_dmx_queue_reset
insmod: unresolved symbol avia_av_napi_decoder_stop
insmod: unresolved symbol avia_gt_dmx_queue_stop
insmod: unresolved symbol avia_gt_dmx_queue_irq_enable
insmod: unresolved symbol avia_gt_dmx_set_pcr_pid
insmod: unresolved symbol avia_gt_vbi_stop
insmod: unresolved symbol avia_av_audio_pts_to_stc
insmod: unresolved symbol avia_gt_dmx_queue_write
insmod: unresolved symbol avia_gt_dmx_alloc_queue_teletext
insmod: unresolved symbol avia_gt_dmx_enable_clip_mode
insmod: unresolved symbol avia_gt_dmx_disable_framer
insmod: unresolved symbol avia_gt_dmx_disable_clip_mode
insmod: unresolved symbol avia_av_napi_decoder_start
insmod: unresolved symbol avia_gt_dmx_queue_start
insmod: unresolved symbol avia_gt_get_info
insmod: unresolved symbol avia_gt_dmx_enable_framer
insmod: unresolved symbol avia_gt_dmx_alloc_queue_video
insmod: unresolved symbol avia_gt_dmx_free_queue
insmod: unresolved symbol avia_gt_dmx_alloc_queue_audio
insmod: unresolved symbol avia_gt_dmx_alloc_queue_user
insmod: unresolved symbol avia_gt_dmx_get_stc
insmod: unresolved symbol avia_gt_accel_crc32
jtginfo $Id: jtginfo.c,v 1.1 2004/05/31 16:00:30 jtgriker Exp $
$Id: sectionsd.cpp,v 1.176 2004/04/29 09:11:13 metallica Exp $
caching 504 hours
events are old 180min after their end time
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
$Id: zapit.cpp,v 1.354 2004/06/10 19:56:12 rasc Exp $
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
/var/tuxbox/config/zapit/services.xml: No such file or directory
[audio.cpp:CAudio:34] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:CVideo:33] /dev/dvb/adapter0/video0: No such file or directory
[sectionsd] open dmx: No such file or directory
[camd] /dev/dvb/adapter0/demux0: No such file or directory
$Id: controld.cpp,v 1.117 2004/05/22 14:34:09 carjay Exp $

[ConfigFile] Unable to open file /var/tuxbox/con[sectionsd] getUTC: open: No suc
h file or directory
fig/controld.conf for reading.
[controld] /var/tuxbox/config/controld.conf not found
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[nhttpd] Neutrino HTTP-Server starting..
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[sectionsd] open dmx: No such file or directory
zapit shot down :)
Waiting for controld (max. 5 seconds)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
Waiting for controld (max. 4 seconds)
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 3 seconds)
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 2 seconds)
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Waiting for controld (max. 1 seconds)
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Going to halt system now ...
Starting pid 129, console /dev/console: '/etc/init.d/halt'
[sectionsd] open dmx: No such file or directory
CXA2092 found
CXA2092 found
Unmounting 'ramfs' on '/tmp'
umount: /tmp: Device or resource busy
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
Unmounting 'jffs2' on '/var'
[sectionsd] open dmx: No such file or directory
[sectionsd] getUTC: open: No such file or directory
Ready to shutdown system...
The system is going down NOW !![ConfigFile] Unable to open file /var/tuxbox/conf
ig/control[nhttpd] stop requested......
d.conf for writing.
Sending SIGKILL to all processes.
The system is halted. Press Reset or turn off power
mash4077
Tuxboxer
Tuxboxer
Beiträge: 4654
Registriert: Samstag 27. April 2002, 13:19

Re: Was ist an dieser Box defekt ? Bitte um Hilfe

Beitrag von mash4077 »

uhwahl hat geschrieben: avia_av: microcode verify: 25293 errors.
avia_av: imem verify: 256 errors
avia_av: timeout waiting for decoder init to complete. (82098309)
insmod: init_module: avia_av: Input/output error
Hi,

vermutlich AVIA und/oder dessen RAM defekt. Mehr kann wohl nur ein Hardware-Spezi wie z.B. DieMade sagen.

Gruß
mash
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

*zustimmend.nick*
There are 10 types of people in the world: those who know binary and those who don't
uhwahl
Neugieriger
Neugieriger
Beiträge: 13
Registriert: Freitag 9. August 2002, 21:01

Beitrag von uhwahl »

Hallo! Vilen Dank für die Info. Leider ist es nicht möglich, nachzuvollziehen, warum dieser Chip plötzlich kaputt ist. Ich denke, eine Reparatur wird sich nicht lohnen, selbst wenn ich den Chip bekäme könnte ich ihn nicht einlöten.

Vielen Dank nochmal für die schnelle Hilfe, hat mir einiges gebracht !
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

"Warum ist die Zylinderkopfdichtung geplatzt, die war doch gestern noch dicht?" - wenn Du diese und ähnliche Fragen zufriedenstellend beantworten kannst, findest Du auch die Antwort auf Deine Frage.

Technik geht nunmal "einfach so" kaputt (auch unbewegliche Bauteile unterliegen Verschleiß).
There are 10 types of people in the world: those who know binary and those who don't