Phillips: Bank # 2 missing or unknown FLASH type

Boxenweitwurf
fugger
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Samstag 1. Mai 2004, 16:14

Phillips: Bank # 2 missing or unknown FLASH type

Beitrag von fugger »

ist der zweite flash kaputt ?

Code: Alles auswählen

=> flinfo

Bank # 1: INTEL 28F320C3B (32M, bottom boot sect), 32 bit

  Size: 8192 kB in 71 Sectors
  Sector Start Addresses:
    10000000 (RO) 10004000 (RO) 10008000 (RO) 1000C000 (RO)
    10010000 (RO) 10014000 (RO) 10018000 (RO) 1001C000 (RO)
    10020000      10040000      10060000      10080000     
    100A0000      100C0000      100E0000      10100000     
    10120000      10140000      10160000      10180000     
    101A0000      101C0000      101E0000      10200000     
    10220000      10240000      10260000      10280000     
    102A0000      102C0000      102E0000      10300000     
    10320000      10340000      10360000      10380000     
    103A0000      103C0000      103E0000      10400000     
    10420000      10440000      10460000      10480000     
    104A0000      104C0000      104E0000      10500000     
    10520000      10540000      10560000      10580000     
    105A0000      105C0000      105E0000      10600000     
    10620000      10640000      10660000      10680000     
    106A0000      106C0000      106E0000      10700000     
    10720000      10740000      10760000      10780000     
    107A0000      107C0000      107E0000     

Bank # 2: missing or unknown FLASH type
kumpel hatte nach mehreren erfolglosen versuchen ein neues image in seine box zu flashen, dann endgültig ''alle methoden durchprobiert'' u.a. wahrscheinlich auch irgendwas für 1xi boxen

für mich sieht es nun jedenfalls so aus als ob die box ''glaubt'' ne 1xi zu sein (8mb in einem flash)

kann leider nicht vergleichen da meine nokia 2xi nicht auf ''flinfo'' antwortet

jedenfalls steht die Phillips jetzt hier:

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 65.74 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
und ist zu nix mehr zu bewegen

Code: Alles auswählen

=> fsinfo
Partition # 0: jffs2, offset: 0x10040000, size 0x7c0000
Partition # 1: unsupported, offset: 0x0, size 0x0
Partition # 2: unsupported, offset: 0x0, size 0x0
Partition # 3: unsupported, offset: 0x0, size 0x0
Ps. das original bn-image ist vorhanden, vielleicht könnte man den bootloader per mhc/icache oderso irgendwie ersetzen (falls es an dem liegen sollte)

würde mich über konstruktive antworten freuen

thx schonmal

cu
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Die 2 Flashs werden zu einer Bank gemultiplext, die Meldung ist OK.

Poste mal ein Log vom Flashvorgang und qanschließendem Boot.
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
fugger
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Samstag 1. Mai 2004, 16:14

Beitrag von fugger »

das ist der derzeitige zustand:

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> <INTERRUPT>
=> <INTERRUPT>
=> boot net
Usage:
bootd   - boot default, i.e., run 'bootcmd'

=> reset
debug: DDF: Calibrating delay loop... debug: DDF: 65.74 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> boot net
Usage:
bootd   - boot default, i.e., run 'bootcmd'
und ganz selten, alle 20 reset's oderso:

Code: Alles auswählen

9debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> reset
debug: DDF: Calibrating delay loop... debug: DDF: 65.74 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.3
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash

Code: Alles auswählen

9debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> 
   debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
dbox2:root> boot net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root> boot net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root> reset
dbox2:root>  debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> boot net
Usage:
bootd   - boot default, i.e., run 'bootcmd'

=> reset
debug: DDF: Calibrating delay loop... debug: DDF: 65.74 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 169.254.19.164, My IP 169.254.19.166
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
debug: 
TFTP failed, giving up...
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>
die springt extrem schlecht an, die nokia läßt sich unter gleichen bedingungen mit einmal ''boot net'' flashen
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

debug: Got BOOTP reply from Server IP 169.254.19.164, My IP 169.254.19.166
debug: Sending TFTP-request for file C/Programme/DBoxBoot/ppcboot_writeflash
Vergib mal anständige IP's für Dein Netzwerk, siehe http://www.dietmar-h.net/Netzwerk.html

Danach nochmal versuchen zu flashen und COM- sowie Netzwerklog (grauer Kasten oben im Bootmanager) hier posten.
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
fugger
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Samstag 1. Mai 2004, 16:14

Beitrag von fugger »

hatte ja oben auch ne 192'er adresse, und mit der nokia funktioniert es ja auch

die Karte war/ist fest auf 10Mbit half-duplex

mediasensing war/ist aus

Code: Alles auswählen

***Adapter Desc: Realtek RTL8139/810x Family Fast Ethernet NIC - Paketplaner-Miniport (via IpHlpApi #0)
***MAC address: xy:xy:xy:xy:xy:xy Local IP: 192.168.5.3
***BootP server started...  Port 67
***TFTP server started... Port 69

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
dbox2:root> boot net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root> reset
dbox2:root>  debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> 
   debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
dbox2:root> boot net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
dbox2:root> reset
dbox2:root>  debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: WATCHDOG RESET
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=> reset
debug: DDF: Calibrating delay loop... debug: DDF: 65.74 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000


U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)

CPU:   PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips --       Watchdog enabled
I2C:   ready
DRAM:  32 MB
FLASH:  8 MB
LCD:   ready
FB:    ready
In:    serial
Out:   serial
Err:   serial
Net:   SCC ETHERNET
Scanning JFFS2 FS: ... done.
find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb' -> not found in flash.
find_inode failed for name=var
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf' -> not found, using 'conso
le=/dev/ttyS0'find_inode failed for name=var

### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf' -> not found, using 'root=/
dev/mtdblock/2 rw'
### FS (jffs2) loading 'vmlinuz'
ERROR: 'vmlinuz' not found in flash.
...............................................................
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>

Code: Alles auswählen

debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0  mID 02
debug: feID 00    enxID 03
debug: fpID 52     dsID xy
debug: HWrev 01  FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
debug: &_text 0x10000, &_etext 0x26d40, &_data 0x26d40, &_edata 0x2a83c
debug: &_end 0x357c4,  &__stack 0x400000
debug: Memory tests (0x400000 -- 0x2000000)
debug: NumberTest: debug: passed
debug: MarchTest: debug: passed
debug: PermTest:  debug: passed
dbox2:root> boot net
debug: 
BOOTP/TFTP bootstrap loader (v0.3)
debug: 
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
boot: elfcopy failed: 16
Zuletzt geändert von fugger am Sonntag 13. Juni 2004, 16:50, insgesamt 1-mal geändert.
Nach oben
DieMade
Oberlamer, Administrator & Supernanny
Beiträge: 10532
Registriert: Samstag 13. Juli 2002, 10:49

Beitrag von DieMade »

Aktuelle Realtek-Treiber installiert?

Link an der Netzwerkkarte/am Hub/Switch zu erkennen?

Auch wenn es mit der Nokia funktioniert, kann eine nicht ganz optimale Netzwerkkonfiguration zu Fehlern führen.

Natürlich könnte auch der Netzwerkport an der Box defekt sein, aber in 95% aller Fälle leigt es doch eher am PC.
There are 10 types of people in the world: those who know binary and those who don't
Nach oben
fugger
Neugieriger
Neugieriger
Beiträge: 8
Registriert: Samstag 1. Mai 2004, 16:14

Beitrag von fugger »

treiber ist aktuell, box per crossover dran

aber die karte ist onbard, hatte die zweite onboard deaktiviert und sogar im bios ausgeschalten

und mit nokia und sagem boxen hatte ich die probs noch nicht

muß wohl ne 10'er pci karte besorgen und weiter probieren

das komische ist nur das ich die box damals selbst in debug gebracht hatte und nu nach all den jahren seh ich die box mal wieder und die reagiert fast überhaupt nicht mehr im netzwerk

hatte damals anderen rechner und laut debuglog (schön aufgehoben) ne intel pci karte

Code: Alles auswählen

***Adapter Desc: Intel DC21041 PCI Ethernet Adapter (Microsoft's Packet Scheduler) 
***MAC address: xy:xy:xy:xy:xy:xy Local IP: 192.168.0.3 (via Packet-Driver #0)
***BootP server started...  Port 67
***TFTP server started... Port 69
BootP> Request from xy:xy:xy:xy:xy:xy (assuming that this is DBox).
BootP> Answer sent!
TFTP> Started TFTP-Transfer for "C:\xyflsh\kernel\os"...
TFTP> Transfer finished, sent 2444 blocks
RARP> Answer sent to xy:xy:xy:xy:xy:xy with DBox-IP: 192.168.0.25
1 - mountd: mount: path: C/xyflsh/
Nach oben

Zurück zu „Hardware“